Generated by kicad-footprint-generator · KiCad file format 20260206
ZGAD125D12
Zynalog · Analog To Digital Converters (ADCs) · QFN-64(9x9)
ZGAD125D12 from Zynalog, in a QFN-64(9x9). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | 1.8V analog supply (1.7V to 1.9V per Table 2); bypass to ground with 0.1µF ceramic, and pins 1, 2 and 64 may share one bypass capacitor. |
| 2 | VDD | power_in | 1.8V analog supply (1.7V to 1.9V per Table 2); bypass to ground with 0.1µF ceramic, and pins 1, 2 and 64 may share one bypass capacitor. |
| 3 | GND | power_in | Power ground; the exposed pad on the package underside must be soldered to PCB ground. |
| 4 | VinA+ | input | Channel A differential analog input, positive; drive around VCM (nominal 0.435×VDD) with a differential swing within 1.5Vpp and 180° phase between VinA+ and VinA-. |
| 5 | VinA- | input | Channel A differential analog input, negative; drive around VCM (nominal 0.435×VDD) with a differential swing within 1.5Vpp and 180° phase relative to VinA+. |
| 6 | GND | power_in | Power ground; the exposed pad on the package underside must be soldered to PCB ground. |
| 7 | SENSE | input | External reference input: tie to VDD to select the internal reference (±0.75V input range), or drive with an external reference between 1.2V and 1.3V for a ±0.6×VSENSE input range. |
| 8 | VREF | power_in | Reference voltage output, nominal 1.25V; bypass to ground with a 2.2µF ceramic capacitor. |
| 9 | GND | power_in | Power ground; the exposed pad on the package underside must be soldered to PCB ground. |
| 10 | VCM | output | Common-mode bias output, nominal 0.435×VDD, used to set the analog input common mode; bypass to ground with 0.1µF ceramic. |
| 11 | GND | power_in | Power ground; the exposed pad on the package underside must be soldered to PCB ground. |
| 12 | VinB- | input | Channel B differential analog input, negative; drive around VCM (nominal 0.435×VDD) with a differential swing within 1.5Vpp and 180° phase relative to VinB+. |
| 13 | VinB+ | input | Channel B differential analog input, positive; drive around VCM (nominal 0.435×VDD) with a differential swing within 1.5Vpp and 180° phase relative to VinB-. |
| 14 | GND | power_in | Power ground; the exposed pad on the package underside must be soldered to PCB ground. |
| 15 | VDD | power_in | 1.8V analog supply (1.7V to 1.9V per Table 2); bypass to ground with 0.1µF ceramic, and pins 15, 16 and 17 may share one bypass capacitor. |
| 16 | VDD | power_in | 1.8V analog supply (1.7V to 1.9V per Table 2); bypass to ground with 0.1µF ceramic, and pins 15, 16 and 17 may share one bypass capacitor. |
| 17 | VDD | power_in | 1.8V analog supply (1.7V to 1.9V per Table 2); bypass to ground with 0.1µF ceramic, and pins 15, 16 and 17 may share one bypass capacitor. |
| 18 | GND | power_in | Power ground; the exposed pad on the package underside must be soldered to PCB ground. |
| 19 | CLK+ | input | Differential sampling clock input, positive; conversion starts on the rising edge, and the clock must stay between -0.1V and VDD+0.1V with jitter below 160 fs recommended. |
| 20 | CLK- | input | Differential sampling clock input, negative; conversion starts on the falling edge, and the clock must stay between -0.1V and VDD+0.1V with jitter below 160 fs recommended. |
| 21 | GND | power_in | Power ground; the exposed pad on the package underside must be soldered to PCB ground. |
| 22 | OF- | output | Complementary overflow/underflow digital output; the channel A and channel B overflow flags are multiplexed onto this pair. |
| 23 | OF+ | output | Overflow/underflow digital output; goes high on overflow or underflow, with channel A and channel B flags multiplexed onto this pair. |
| 24 | NC | unconnected | Marked NC on the pin configuration figure; no function is stated in the datasheet. |
| 25 | NC | unconnected | Marked NC on the pin configuration figure; no function is stated in the datasheet. |
| 26 | DB0_1- | output | Channel B DDR LVDS output, complement; carries D0 while CLKOUT+ is low and D1 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination. |
| 27 | DB0_1+ | output | Channel B DDR LVDS output, true; carries D0 while CLKOUT+ is low and D1 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination. |
| 28 | DB2_3- | output | Channel B DDR LVDS output, complement; carries D2 while CLKOUT+ is low and D3 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination. |
| 29 | DB2_3+ | output | Channel B DDR LVDS output, true; carries D2 while CLKOUT+ is low and D3 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination. |
| 30 | DB4_5- | output | Channel B DDR LVDS output, complement; carries D4 while CLKOUT+ is low and D5 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination. |
| 31 | DB4_5+ | output | Channel B DDR LVDS output, true; carries D4 while CLKOUT+ is low and D5 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination. |
| 32 | DVDD | power_in | 1.8V supply for the digital LVDS output drivers (1.7V to 1.9V); bypass each DVDD pin to ground with a separate 0.1µF ceramic capacitor. |
| 33 | DGND | power_in | Ground for the digital output drivers, isolated from the ADC core supply and ground. |
| 34 | DB6_7- | output | Channel B DDR LVDS output, complement; carries D6 while CLKOUT+ is low and D7 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination. |
| 35 | DB6_7+ | output | Channel B DDR LVDS output, true; carries D6 while CLKOUT+ is low and D7 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination. |
| 36 | DB8_9- | output | Channel B DDR LVDS output, complement; carries D8 while CLKOUT+ is low and D9 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination. |
| 37 | DB8_9+ | output | Channel B DDR LVDS output, true; carries D8 while CLKOUT+ is low and D9 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination. |
| 38 | DB10_11- | output | Channel B DDR LVDS output, complement; carries D10 while CLKOUT+ is low and D11 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination. |
| 39 | DB10_11+ | output | Channel B DDR LVDS output, true; carries D10 while CLKOUT+ is low and D11 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination. |
| 40 | CLKOUT- | output | Complementary LVDS data output clock; data transitions are aligned with the CLKOUT edges, and the phase can be shifted 0°, 45°, 90° or 135° via the timing register (requires the duty cycle stabilizer on). |
| 41 | CLKOUT+ | output | LVDS data output clock, true; data transitions are aligned with the CLKOUT edges, and the phase can be shifted 0°, 45°, 90° or 135° via the timing register (requires the duty cycle stabilizer on). |
| 42 | NC | unconnected | Marked NC on the pin configuration figure; no function is stated in the datasheet. |
| 43 | NC | unconnected | Marked NC on the pin configuration figure; no function is stated in the datasheet. |
| 44 | DA0_1- | output | Channel A DDR LVDS output, complement; carries D0 while CLKOUT+ is low and D1 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination. |
| 45 | DA0_1+ | output | Channel A DDR LVDS output, true; carries D0 while CLKOUT+ is low and D1 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination. |
| 46 | DA2_3- | output | Channel A DDR LVDS output, complement; carries D2 while CLKOUT+ is low and D3 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination. |
| 47 | DA2_3+ | output | Channel A DDR LVDS output, true; carries D2 while CLKOUT+ is low and D3 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination. |
| 48 | DGND | power_in | Ground for the digital output drivers, isolated from the ADC core supply and ground. |
| 49 | DVDD | power_in | 1.8V supply for the digital LVDS output drivers (1.7V to 1.9V); bypass each DVDD pin to ground with a separate 0.1µF ceramic capacitor. |
| 50 | DA4_5- | output | Channel A DDR LVDS output, complement; carries D4 while CLKOUT+ is low and D5 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination. |
| 51 | DA4_5+ | output | Channel A DDR LVDS output, true; carries D4 while CLKOUT+ is low and D5 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination. |
| 52 | DA6_7- | output | Channel A DDR LVDS output, complement; carries D6 while CLKOUT+ is low and D7 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination. |
| 53 | DA6_7+ | output | Channel A DDR LVDS output, true; carries D6 while CLKOUT+ is low and D7 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination. |
| 54 | DA8_9- | output | Channel A DDR LVDS output, complement; carries D8 while CLKOUT+ is low and D9 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination. |
| 55 | DA8_9+ | output | Channel A DDR LVDS output, true; carries D8 while CLKOUT+ is low and D9 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination. |
| 56 | DA10_11- | output | Channel A DDR LVDS output, complement; carries D10 while CLKOUT+ is low and D11 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination. |
| 57 | DA10_11+ | output | Channel A DDR LVDS output, true; carries D10 while CLKOUT+ is low and D11 while CLKOUT+ is high, and each LVDS pair needs an external 100Ω differential termination. |
| 58 | GND | power_in | Power ground; the exposed pad on the package underside must be soldered to PCB ground. |
| 59 | SPI_MISO | output | SPI readback output in serial mode (MODE=0); open-drain, requiring a 2kΩ pull-up to the 1.8V to 3.3V SPI supply only when registers are read back, and it has no function in parallel mode. |
| 60 | SPI_MOSI | input | SPI data input in serial mode (MODE=0); in parallel mode it selects LVDS drive current, 3.5mA when low and 1.75mA when high at 1.8V to 3.3V logic. |
| 61 | SPI_SCLK | input | SPI clock input in serial mode (MODE=0); in parallel mode a high level (1.8V to 3.3V logic) puts the chip into sleep (AC power down). |
| 62 | SPI_CS | input | SPI chip select in serial mode (MODE=0); in parallel mode a high level (1.8V to 3.3V logic) enables the clock duty cycle stabilizer. |
| 63 | MODE | input | Serial/parallel mode select: tie to GND for SPI mode or to VDD for parallel GPIO mode; it must be hard-wired to GND or VDD and not driven by a logic signal. |
| 64 | VDD | power_in | 1.8V analog supply (1.7V to 1.9V per Table 2); bypass to ground with 0.1µF ceramic, and pins 1, 2 and 64 may share one bypass capacitor. |
| 65 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Zynalog |
| Package | QFN-64(9x9) |
| Category | ADC/DAC/Data Conversion |
| Pins | 65 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD analog supply voltage | VDD | 1.7 | 1.8 | 1.9 | V | 4 | |
| DVDD digital supply voltage | DVDD | 1.7 | 1.8 | 1.9 | V | 4 | |
| Integral nonlinearity | INL | -2 | 0.6 | 2 | LSB | 4 | |
| Differential nonlinearity | DNL | -0.6 | 0.25 | 0.6 | LSB | 4 | |
| Offset error | Offset Error | -13 | 5 | 13 | mV | 4 | |
| Gain error | Gain Error | -4 | 1 | 2.2 | %FS | 4 | |
| Digital output differential voltage (3.5mA mode) | V_OD | 247 | 350 | 454 | mV | 3.5mA 模式下 | 4 |
| Digital output differential voltage (1.75mA mode) | V_OD | 125 | 175 | 250 | mV | 1.75mA 模式下 | 4 |
| Digital output common-mode voltage | V_OS | 1.125 | 1.25 | 1.375 | V | 4 | |
| Clock input to clock output delay | tC | 1.3 | 1.6 | 2 | ns | VDD=1.8V, DVDD=1.8V, fS=125MHz | 10 |
| Clock input to data output delay | tD | 1.7 | 2 | 2.3 | ns | VDD=1.8V, DVDD=1.8V, fS=125MHz | 10 |
| Clock output to data output skew (tC - tD) | tSKEW | 0.1 | 0.2 | 0.55 | ns | VDD=1.8V, DVDD=1.8V, fS=125MHz | 10 |
| VDD, DVDD maximum input voltage range | VDD,DVDD | -0.3 | 2 | V | 6 | ||
| Analog input voltage range (max VDD+0.2) | Analog Vin | -0.3 | V | 6 | |||
| CLK, SENSE input voltage range (max VDD+0.2) | CLK,SENSE | -0.3 | V | 6 | |||
| SPI/GPIO digital voltage range (min VDD) | SPI | 3.9 | V | 6 | |||
| LVDS data output voltage range (max DVDD+0.2) | Data Output | -0.3 | V | 6 | |||
| Working temperature | -40 | 85 | °C | 6 | |||
| Storage temperature | -65 | 150 | °C | 6 |
CAD (KiCad official)
- Symbol:
ZGAD125D12 - Footprint:
Package_DFN_QFN:QFN-64-1EP_9x9mm_P0.5mm_EP6x6mm - 3D model: QFN-64(9x9) (KiCad packages3D, STEP)
- 3D model files:
zgad125d12-etched.step/zgad125d12-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);zgad125d12.step/zgad125d12.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Zynalog datasheet (19 pp, sha256
6052601f436a55c9, retrieved 2026-11-11, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).