component

ZD24C08A-SSGMB

Public Made by Adom

by adom

Zetta EEPROM, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentmemoryzd24c08a-ssgmb
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs zd24c08a-ssgmb: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray 1mo ago
package.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray 1mo ago
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray 1mo ago
page.json Brief states the pinout check that actually ran (was an unconditional "Datasheet-verified pinout") · Ray 10d ago
README.md zd24c08a-ssgmb: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray 16d ago
zd24c08a-ssgmb-etched.fit.json zd24c08a-ssgmb: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
zd24c08a-ssgmb-etched.glb zd24c08a-ssgmb: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
zd24c08a-ssgmb-etched.step zd24c08a-ssgmb: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
zd24c08a-ssgmb.glb Publish 0.1.0 · Ray 1mo ago
zd24c08a-ssgmb.kicad_mod Publish 0.1.0 · Ray 1mo ago
zd24c08a-ssgmb.kicad_sym Publish 0.1.0 · Ray 1mo ago
zd24c08a-ssgmb.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect and oval pad as a SQUARE EAGLE smd; this carries the real pad shape across (0 -> 8 rounded pads) and stops dropping geometry drawn on KiCad User.N layers. Attributes, connects, pads and the pin-1 marker are gated against decreasing and are unchanged. · Ray 1mo ago
zd24c08a-ssgmb.step Publish 0.1.0 · Ray 1mo ago

ZD24C08A-SSGMB

Zetta · EEPROM · SOP-8

ZD24C08A-SSGMB from Zetta, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 A2 input Hardware device address input bit A2. Tie directly to VCC or GND to select one of two device addresses on the I2C bus. Internally pulled down to GND (weakly) when left floating; Zetta recommends driving to a known state.
2 NC unconnected Not internally bonded. May be left floating or tied to GND. (Corresponds to A1 on smaller-density variants; unused on the 8K device because that address bit is repurposed as page-select P1.)
3 NC unconnected Not internally bonded. May be left floating or tied to GND. (Corresponds to A0 on smaller-density variants; unused on the 8K device because that address bit is repurposed as page-select P0.)
4 GND power_in Ground reference for the power supply. Connect to system ground.
5 SDA bidirectional I2C serial data. Open-drain bidirectional line; must be pulled high with an external resistor (not exceeding 10 kOhm). May be wire-ORed with other open-drain/open-collector devices on the same bus.
6 SCL input I2C serial clock input from the bus master. Data on SDA is latched on the rising edge and output on the falling edge of SCL. Must be forced high when the bus is idle or pulled high through an external resistor.
7 WP input Write Protect (active high). Tie to GND for normal read/write operation; tie to VCC to inhibit all writes to the full memory array. Internally pulled down to GND when left floating; Zetta recommends driving to a known state.
8 VCC power_in Device power supply. Operations at invalid VCC voltages may produce spurious results and should not be attempted.

Key specifications

Parameter Value
Manufacturer Zetta
Package SOP-8
Category Memory
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • ZD24C08A-SSGMB

CAD (KiCad official)

  • Symbol: ZD24C08A-SSGMB
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: zd24c08a-ssgmb-etched.step / zd24c08a-ssgmb-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); zd24c08a-ssgmb.step / zd24c08a-ssgmb.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Zetta datasheet (22 pp, sha256 b348afafa94d42a8, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF