main
Ray
Publish 0.1.0
0b34f02
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190
{
"slug": "xw02e-sop8",
"version": "0.1.0",
"type": "component",
"description": "Sam&wing Touch Sensors, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"sensors",
"xw02e sop8",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"xw02e-sop8.kicad_sym",
"xw02e-sop8.kicad_mod",
"xw02e-sop8.glb",
"xw02e-sop8.step",
"xw02e-sop8.lbr",
"docs/hero.png",
"docs/xw02e-sop8-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"xw02e-sop8-hero.glb",
"xw02e-sop8-hero.overlay.json",
"xw02e-sop8-etched.glb"
],
"component": {
"mpn": "XW02E SOP8",
"manufacturer": "Sam&wing",
"package": "SOP-8",
"pin_count": 8,
"category": "Sensors",
"subcategory": "Touch Sensors",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/c62d5cf1785e671a470995f42602bc8c.pdf",
"parts": {
"symbol": "xw02e-sop8.kicad_sym",
"footprint": "xw02e-sop8.kicad_mod",
"model_3d": "xw02e-sop8-hero.glb",
"model_3d_plain": "xw02e-sop8-etched.glb",
"model_3d_step": "xw02e-sop8-etched.step",
"model_3d_step_plain": "xw02e-sop8.step",
"lbr": "xw02e-sop8.lbr"
},
"distributor_links": {
"lcsc": "C5156897"
},
"distributor_check": {
"checked_at": "2026-10-27T05:47:23Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"pins": [
{
"number": "1",
"name": "GND",
"type": "power_in",
"description": "Power ground (电源地) for the device; the datasheet specifies no separate limit for this pin."
},
{
"number": "2",
"name": "C1",
"type": "passive",
"description": "Internal balance capacitor interface; the datasheet gives a range of 1nF to 10nF with 4.7nF recommended, using a 10% tolerance NPO capacitor placed close to the IC."
},
{
"number": "3",
"name": "CSEL",
"type": "passive",
"description": "Sensitivity adjustment capacitor interface; range 0 to 100pF, where a smaller capacitance gives higher sensitivity and leaving it open (0 pF) gives the highest sensitivity."
},
{
"number": "4",
"name": "PAD0",
"type": "passive",
"description": "Touch key 0 sensing pad input; the sensing pad area is recommended between 3mm*3mm and 30mm*30mm, with the same size for each pad."
},
{
"number": "5",
"name": "PAD1",
"type": "passive",
"description": "Touch key 1 sensing pad input; the sensing pad area is recommended between 3mm*3mm and 30mm*30mm, with the same size as PAD0."
},
{
"number": "6",
"name": "OUT1",
"type": "output",
"description": "Channel 1 open-drain output that goes low while touch key PAD1 is pressed and is high-impedance when released; an external pull-up resistor is required."
},
{
"number": "7",
"name": "OUT0",
"type": "output",
"description": "Channel 0 open-drain output that goes low while touch key PAD0 is pressed and is high-impedance when released; an external pull-up resistor is required."
},
{
"number": "8",
"name": "VDD",
"type": "power_in",
"description": "Positive supply with an operating range of 2.5 to 5.5 V and an absolute maximum of -0.3 to 6.0 V; supply ripple and noise should be kept low."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": null,
"consensus": "skipped (clean text read)",
"guards": "pin_guards 0.1: passed",
"guard_notes": [],
"pages_sent": 7,
"cost_usd": 0.0005,
"at": "2026-10-27T05:47:13"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/c62d5cf1785e671a470995f42602bc8c.pdf",
"pages": 7,
"sha256": "0122f6d62fcae047",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 8,
"described": 8,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "xw02e-sop8.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
4.9,
1.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-10-27",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "xw02e-sop8-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
4.9,
1.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "6f2e0e15b534fcec04501f411c7002a80d51cb733c19e83b6d12ded5b7c4cc17",
"checked": "2026-10-27",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}