component
XT26G02DWSIGA
Public Made by Adomby adom
XTX NAND FLASH, WSON-8-EP(6x8). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownXT26G02DWSIGA
XTX · NAND FLASH · WSON-8-EP(6x8)
XT26G02DWSIGA from XTX, in a WSON-8-EP(6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select input; active low enables device operation, high level disables device and places outputs in high impedance. |
| 2 | SO (SIO1) | bidirectional | Serial data output (standard SPI) / bidirectional SIO1 (Dual/Quad SPI); data shifts out on CLK falling edge. |
| 3 | WP# (SIO2) | bidirectional | Write Protect input (internally pulled to VCC) that prevents block lock bit changes when driven low with BRWD bit set; becomes bidirectional SIO2 in Quad mode. |
| 4 | VSS | power_in | Ground connection (0V reference). |
| 5 | SI (SIO0) | bidirectional | Serial data input (standard SPI) / bidirectional SIO0 (Dual/Quad SPI); data latched on CLK rising edge. |
| 6 | CLK | input | Serial Clock Input (maximum 120 MHz) synchronizing the SPI interface; data input latched on rising edge, output valid after falling edge. |
| 7 | SIO3 | bidirectional | Bidirectional data line 3 for Quad SPI mode; must be kept high in Standard and Dual SPI modes when not in active input/output state. |
| 8 | VCC | power_in | Power supply with operating voltage range 2.7V to 3.6V. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XTX |
| Package | WSON-8-EP(6x8) |
| Category | Memory |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
XT26G02DWSIGA - Footprint:
Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm - 3D model: WSON-8-EP(6x8), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
xt26g02dwsiga-etched.step/xt26g02dwsiga-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xt26g02dwsiga.step/xt26g02dwsiga.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XTX datasheet (62 pp, sha256
37d42f1d58f2cd6f, retrieved 2026-10-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).