main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers xr33052hd-f: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray
xr33052hd-f-etched.glb Publish 0.1.0 · Ray
xr33052hd-f-etched.step xr33052hd-f: factory component page (tier=lcsc) · Ray
xr33052hd-f-hero.glb xr33052hd-f: hero GLB from the etched model (keeps the MPN mark) · Ray
xr33052hd-f-hero.overlay.json Publish 0.1.0 · Ray
xr33052hd-f.glb Publish 0.1.0 · Ray
xr33052hd-f.kicad_mod Publish 0.1.0 · Ray
xr33052hd-f.kicad_sym Publish 0.1.0 · Ray
xr33052hd-f.lbr Publish 0.1.0 · Ray
xr33052hd-f.step Publish 0.1.0 · Ray

XR33052HD-F

MaxLinear · RS-485/RS-422 ICs · SOIC-8

XR33052HD-F from MaxLinear, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output: with RE low, RO is high when A-B is at least 200mV and low when A-B is at or below -200mV, and it is high if the inputs are left floating, shorted or undriven for more than 2µs.
2 RE input Receiver output enable (hot swap): RO is enabled when RE is low and goes high impedance when RE is high, and RE should be high with DE low to enter shutdown mode.
3 DE input Driver output enable (hot swap): the driver outputs are enabled when DE is high and high impedance when DE is low, and DE should be low with RE high to enter shutdown mode.
4 DI input Driver input: with DE high, a low on DI forces the non-inverting output low and the inverting output high, and a high on DI forces the non-inverting output high and the inverting output low.
5 GND power_in Power ground.
6 A/Y bidirectional Non-inverting receiver input and non-inverting driver output on the bus; the bus pins withstand ±60V and have ±15kV HBM ESD protection.
7 B/Z bidirectional Inverting receiver input and inverting driver output on the bus; the bus pins withstand ±60V and have ±15kV HBM ESD protection.
8 VCC power_in Power supply input, 3.0V to 5.5V; bypass to ground with a 0.1µF capacitor.

Key specifications

Parameter Value
Manufacturer MaxLinear
Package SOIC-8
Category Communication Interface Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage range VCC 3 5.5 V 3
Differential driver output (RS-422) VOD 2 V 4.5V ≤ VCC ≤ 5.5V, RL = 100Ω (RS-422), Figure 3 3
Differential driver output (RS-485) VOD 1.5 V 4.5V ≤ VCC ≤ 5.5V, RL = 54Ω (RS-485), Figure 3 3
Differential driver output over common mode VOD 1.5 V -25V ≤ VCM ≤ 25V, Figure 4 3
Differential driver output (RS-422), 3.0V to 4.5V VOD 0.85 V 3.0V ≤ VCC ≤ 4.5V, RL = 100Ω (RS-422), Figure 3 3
Differential driver output (RS-485), 3.0V to 4.5V VOD 0.65 V 3.0V ≤ VCC ≤ 4.5V, RL = 54Ω (RS-485), Figure 3 3
Change in magnitude of differential output voltage ΔVOD -0.2 0.2 V RL = 100Ω (RS-422) or RL = 54Ω (RS-485), Figure 3 3
Driver common-mode output voltage (steady state) VCM 1 3 V steady state 3
Change in magnitude of common-mode output voltage ΔVCM -0.2 0.2 V 3
Logic high input threshold (DI, DE, RE) VIH 2 V VCC = 3.3V 3
Logic high input threshold (DI, DE, RE) VIH 2.4 V VCC = 5.0V 3
Logic low input threshold (DI, DE, RE) VIL 0.8 V 3
Input hysteresis (DI, DE, RE) VHYS 100 mV 3
Logic input current (DI, DE, RE) IIN -1 1 µA 0V ≤ VIN ≤ VCC, After first transition 3
Logic input current hot swap (DE, RE) IINHS -200 100 200 µA Until first transition 3
Input current (A and B), VOUT = 12V IA, B 100 µA VCC = 0V or 5.5V, VOUT = 12V, DE = 0V, for XR33052/53/55 3
Input current (A and B), VOUT = -7V IA, B -80 µA VCC = 0V or 5.5V, VOUT = -7V, DE = 0V, for XR33052/53/55 3
Driver short-circuit output current IOSD -250 250 mA -60V ≤ VOUT ≤ 60V, DI = 0V or VCC, Figure 5 3
Thermal shutdown temperature TTS 175 °C Junction temperature 4
Receiver differential input fail-safe threshold voltage, negative going VFSTH- -200 -125 -40 mV -25V ≤ VOUT ≤ 25V 4
Receiver differential input fail-safe threshold voltage, positive going VFSTH+ -100 -10 mV -25V ≤ VOUT ≤ 25V 4
Receiver output low voltage (RO) VOL 0.4 V IOUT = 4mA 4
High-Z receiver output current IOZR -1 1 µA 0V ≤ VOUT ≤ VCC 4
RX input resistance RIN 120 kΩ -25V ≤ VCM ≤ 25V, XR33052/53/55 4
Supply current ICC 4 mA No load, RE = 0V or VCC, DE = VCC, DI = 0V or VCC 4
Supply current in shutdown mode ISHDN 0.001 1 µA RE = VCC, DE = 0V 4
Driver propagation delay (low to high), XR33052 tDPLH 350 1500 ns CL = 50pF, RL = 54Ω, Figure 7 5
Driver propagation delay (high to low), XR33052 tDPHL 350 1600 ns CL = 50pF, RL = 54Ω, Figure 7 5
Differential driver output skew, XR33052 /tDPLH-tDPHL/ 20 200 ns CL = 50pF, RL = 54Ω, Figure 7 5
Driver differential output rise or fall time, XR33052 tDR, tDF 400 1500 ns CL = 50pF, RL = 54Ω, Figure 7 5
Maximum data rate (driver), XR33052 250 kbps 1/tUI, duty cycle 40% to 60% 5
Driver enable to output high, XR33052 tDZH 200 2500 ns CL = 50pF, RL = 500Ω, Figure 8 5
Driver enable to output low, XR33052 tDZL 200 2500 ns CL = 50pF, RL = 500Ω, Figure 8 5
Driver disable from output high, XR33052 tDHZ 250 ns 5
Driver disable from output low, XR33052 tDLZ 250 ns 5
Driver enable from shutdown to output high, XR33052 tRZH(SHDN) 5500 ns CL = 50pF, RL = 500Ω, Figure 8 5
Driver enable from shutdown to output low, XR33052 tRZL(SHDN) 5500 ns CL = 50pF, RL = 500Ω, Figure 8 5
Time to shutdown tSHDN 50 200 600 ns Notes 1 and 2 5
Receiver propagation delay (low to high), XR33052 tRPLH 200 ns CL = 15pF, VID = ±2V, VID rise and fall times < 15ns, Figure 9 5
Receiver propagation delay (high to low), XR33052 tRPHL 200 ns CL = 15pF, VID = ±2V, VID rise and fall times < 15ns, Figure 9 5
Receiver propagation delay skew, XR33052 /tRPLH-tRPHL/ 30 ns 5
Receiver enable to output high, XR33052 tRZH 50 ns CL = 15pF, RL = 1kΩ, Figure 10 5
Receiver enable to output low, XR33052 tRZL 50 ns CL = 15pF, RL = 1kΩ, Figure 10 5
Receiver enable from shutdown to output high, XR33052 tRZH(SHDN) 3500 ns CL = 15pF, RL = 1kΩ, Figure 10 5
Receiver enable from shutdown to output low, XR33052 tRZL(SHDN) 3500 ns CL = 15pF, RL = 1kΩ, Figure 10 5
Supply voltage (VCC) absolute maximum VCC -0.3 7 V 2
Input voltage (DE and DI) -0.3 7 V 2
Input voltage (RE) -0.3 V Upper limit printed as VCC + 0.3V 2
Receiver output voltage (RO) -0.3 V Upper limit printed as VCC + 0.3V 2
Driver output voltage (Y, Z, A/Y, B/Z) -60 60 V 2
Receiver input voltage (A, B, A/Y, B/Z) -60 60 V 2
Transient voltage pulse -100 100 V through 100Ω 2
Driver output current -250 250 mA 2
Maximum junction temperature 150 °C 2
Storage temperature -65 150 °C 2
Lead temperature 300 °C soldering 10 seconds 2
ESD HBM (A, B, Y and Z pins) -15 15 kV Human Body Model 2
ESD HBM (all other pins) -4 4 kV Human Body Model 2
Operating temperature range (HD grade) -40 105 °C 2

CAD (KiCad official)

  • Symbol: XR33052HD-F
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: xr33052hd-f-etched.step / xr33052hd-f-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xr33052hd-f.step / xr33052hd-f.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MaxLinear datasheet (20 pp, sha256 d4d2065166fbb06f, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF