3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXR33052HD-F
MaxLinear · RS-485/RS-422 ICs · SOIC-8
XR33052HD-F from MaxLinear, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: with RE low, RO is high when A-B is at least 200mV and low when A-B is at or below -200mV, and it is high if the inputs are left floating, shorted or undriven for more than 2µs. |
| 2 | RE | input | Receiver output enable (hot swap): RO is enabled when RE is low and goes high impedance when RE is high, and RE should be high with DE low to enter shutdown mode. |
| 3 | DE | input | Driver output enable (hot swap): the driver outputs are enabled when DE is high and high impedance when DE is low, and DE should be low with RE high to enter shutdown mode. |
| 4 | DI | input | Driver input: with DE high, a low on DI forces the non-inverting output low and the inverting output high, and a high on DI forces the non-inverting output high and the inverting output low. |
| 5 | GND | power_in | Power ground. |
| 6 | A/Y | bidirectional | Non-inverting receiver input and non-inverting driver output on the bus; the bus pins withstand ±60V and have ±15kV HBM ESD protection. |
| 7 | B/Z | bidirectional | Inverting receiver input and inverting driver output on the bus; the bus pins withstand ±60V and have ±15kV HBM ESD protection. |
| 8 | VCC | power_in | Power supply input, 3.0V to 5.5V; bypass to ground with a 0.1µF capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MaxLinear |
| Package | SOIC-8 |
| Category | Communication Interface Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | 3 | 5.5 | V | 3 | ||
| Differential driver output (RS-422) | VOD | 2 | V | 4.5V ≤ VCC ≤ 5.5V, RL = 100Ω (RS-422), Figure 3 | 3 | ||
| Differential driver output (RS-485) | VOD | 1.5 | V | 4.5V ≤ VCC ≤ 5.5V, RL = 54Ω (RS-485), Figure 3 | 3 | ||
| Differential driver output over common mode | VOD | 1.5 | V | -25V ≤ VCM ≤ 25V, Figure 4 | 3 | ||
| Differential driver output (RS-422), 3.0V to 4.5V | VOD | 0.85 | V | 3.0V ≤ VCC ≤ 4.5V, RL = 100Ω (RS-422), Figure 3 | 3 | ||
| Differential driver output (RS-485), 3.0V to 4.5V | VOD | 0.65 | V | 3.0V ≤ VCC ≤ 4.5V, RL = 54Ω (RS-485), Figure 3 | 3 | ||
| Change in magnitude of differential output voltage | ΔVOD | -0.2 | 0.2 | V | RL = 100Ω (RS-422) or RL = 54Ω (RS-485), Figure 3 | 3 | |
| Driver common-mode output voltage (steady state) | VCM | 1 | 3 | V | steady state | 3 | |
| Change in magnitude of common-mode output voltage | ΔVCM | -0.2 | 0.2 | V | 3 | ||
| Logic high input threshold (DI, DE, RE) | VIH | 2 | V | VCC = 3.3V | 3 | ||
| Logic high input threshold (DI, DE, RE) | VIH | 2.4 | V | VCC = 5.0V | 3 | ||
| Logic low input threshold (DI, DE, RE) | VIL | 0.8 | V | 3 | |||
| Input hysteresis (DI, DE, RE) | VHYS | 100 | mV | 3 | |||
| Logic input current (DI, DE, RE) | IIN | -1 | 1 | µA | 0V ≤ VIN ≤ VCC, After first transition | 3 | |
| Logic input current hot swap (DE, RE) | IINHS | -200 | 100 | 200 | µA | Until first transition | 3 |
| Input current (A and B), VOUT = 12V | IA, B | 100 | µA | VCC = 0V or 5.5V, VOUT = 12V, DE = 0V, for XR33052/53/55 | 3 | ||
| Input current (A and B), VOUT = -7V | IA, B | -80 | µA | VCC = 0V or 5.5V, VOUT = -7V, DE = 0V, for XR33052/53/55 | 3 | ||
| Driver short-circuit output current | IOSD | -250 | 250 | mA | -60V ≤ VOUT ≤ 60V, DI = 0V or VCC, Figure 5 | 3 | |
| Thermal shutdown temperature | TTS | 175 | °C | Junction temperature | 4 | ||
| Receiver differential input fail-safe threshold voltage, negative going | VFSTH- | -200 | -125 | -40 | mV | -25V ≤ VOUT ≤ 25V | 4 |
| Receiver differential input fail-safe threshold voltage, positive going | VFSTH+ | -100 | -10 | mV | -25V ≤ VOUT ≤ 25V | 4 | |
| Receiver output low voltage (RO) | VOL | 0.4 | V | IOUT = 4mA | 4 | ||
| High-Z receiver output current | IOZR | -1 | 1 | µA | 0V ≤ VOUT ≤ VCC | 4 | |
| RX input resistance | RIN | 120 | kΩ | -25V ≤ VCM ≤ 25V, XR33052/53/55 | 4 | ||
| Supply current | ICC | 4 | mA | No load, RE = 0V or VCC, DE = VCC, DI = 0V or VCC | 4 | ||
| Supply current in shutdown mode | ISHDN | 0.001 | 1 | µA | RE = VCC, DE = 0V | 4 | |
| Driver propagation delay (low to high), XR33052 | tDPLH | 350 | 1500 | ns | CL = 50pF, RL = 54Ω, Figure 7 | 5 | |
| Driver propagation delay (high to low), XR33052 | tDPHL | 350 | 1600 | ns | CL = 50pF, RL = 54Ω, Figure 7 | 5 | |
| Differential driver output skew, XR33052 | /tDPLH-tDPHL/ | 20 | 200 | ns | CL = 50pF, RL = 54Ω, Figure 7 | 5 | |
| Driver differential output rise or fall time, XR33052 | tDR, tDF | 400 | 1500 | ns | CL = 50pF, RL = 54Ω, Figure 7 | 5 | |
| Maximum data rate (driver), XR33052 | 250 | kbps | 1/tUI, duty cycle 40% to 60% | 5 | |||
| Driver enable to output high, XR33052 | tDZH | 200 | 2500 | ns | CL = 50pF, RL = 500Ω, Figure 8 | 5 | |
| Driver enable to output low, XR33052 | tDZL | 200 | 2500 | ns | CL = 50pF, RL = 500Ω, Figure 8 | 5 | |
| Driver disable from output high, XR33052 | tDHZ | 250 | ns | 5 | |||
| Driver disable from output low, XR33052 | tDLZ | 250 | ns | 5 | |||
| Driver enable from shutdown to output high, XR33052 | tRZH(SHDN) | 5500 | ns | CL = 50pF, RL = 500Ω, Figure 8 | 5 | ||
| Driver enable from shutdown to output low, XR33052 | tRZL(SHDN) | 5500 | ns | CL = 50pF, RL = 500Ω, Figure 8 | 5 | ||
| Time to shutdown | tSHDN | 50 | 200 | 600 | ns | Notes 1 and 2 | 5 |
| Receiver propagation delay (low to high), XR33052 | tRPLH | 200 | ns | CL = 15pF, VID = ±2V, VID rise and fall times < 15ns, Figure 9 | 5 | ||
| Receiver propagation delay (high to low), XR33052 | tRPHL | 200 | ns | CL = 15pF, VID = ±2V, VID rise and fall times < 15ns, Figure 9 | 5 | ||
| Receiver propagation delay skew, XR33052 | /tRPLH-tRPHL/ | 30 | ns | 5 | |||
| Receiver enable to output high, XR33052 | tRZH | 50 | ns | CL = 15pF, RL = 1kΩ, Figure 10 | 5 | ||
| Receiver enable to output low, XR33052 | tRZL | 50 | ns | CL = 15pF, RL = 1kΩ, Figure 10 | 5 | ||
| Receiver enable from shutdown to output high, XR33052 | tRZH(SHDN) | 3500 | ns | CL = 15pF, RL = 1kΩ, Figure 10 | 5 | ||
| Receiver enable from shutdown to output low, XR33052 | tRZL(SHDN) | 3500 | ns | CL = 15pF, RL = 1kΩ, Figure 10 | 5 | ||
| Supply voltage (VCC) absolute maximum | VCC | -0.3 | 7 | V | 2 | ||
| Input voltage (DE and DI) | -0.3 | 7 | V | 2 | |||
| Input voltage (RE) | -0.3 | V | Upper limit printed as VCC + 0.3V | 2 | |||
| Receiver output voltage (RO) | -0.3 | V | Upper limit printed as VCC + 0.3V | 2 | |||
| Driver output voltage (Y, Z, A/Y, B/Z) | -60 | 60 | V | 2 | |||
| Receiver input voltage (A, B, A/Y, B/Z) | -60 | 60 | V | 2 | |||
| Transient voltage pulse | -100 | 100 | V | through 100Ω | 2 | ||
| Driver output current | -250 | 250 | mA | 2 | |||
| Maximum junction temperature | 150 | °C | 2 | ||||
| Storage temperature | -65 | 150 | °C | 2 | |||
| Lead temperature | 300 | °C | soldering 10 seconds | 2 | |||
| ESD HBM (A, B, Y and Z pins) | -15 | 15 | kV | Human Body Model | 2 | ||
| ESD HBM (all other pins) | -4 | 4 | kV | Human Body Model | 2 | ||
| Operating temperature range (HD grade) | -40 | 105 | °C | 2 |
CAD (KiCad official)
- Symbol:
XR33052HD-F - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
xr33052hd-f-etched.step/xr33052hd-f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xr33052hd-f.step/xr33052hd-f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MaxLinear datasheet (20 pp, sha256
d4d2065166fbb06f, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).