XR2682

{
  "slug": "xr2682",
  "version": "0.1.0",
  "type": "component",
  "description": "XySemi DC-DC Converters, ESOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "xr2682",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "xr2682.kicad_sym",
    "xr2682.kicad_mod",
    "xr2682.glb",
    "xr2682.step",
    "xr2682.lbr",
    "docs/hero.png",
    "docs/xr2682-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "xr2682-hero.glb",
    "xr2682-hero.overlay.json",
    "xr2682-etched.glb"
  ],
  "component": {
    "mpn": "XR2682",
    "manufacturer": "XySemi",
    "package": "ESOP-8",
    "pin_count": 9,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588918666553802752",
    "parts": {
      "symbol": "xr2682.kicad_sym",
      "footprint": "xr2682.kicad_mod",
      "model_3d": "xr2682-hero.glb",
      "model_3d_plain": "xr2682-etched.glb",
      "model_3d_step": "xr2682-etched.step",
      "model_3d_step_plain": "xr2682.step",
      "lbr": "xr2682.lbr"
    },
    "distributor_links": {
      "lcsc": "C712496"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T01:10:17Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SW",
        "type": "output",
        "description": "Switch pin of the integrated 6A, 40mΩ boost power switch; the absolute maximum SW voltage is -0.3 to 26V."
      },
      {
        "number": "2",
        "name": "SW",
        "type": "output",
        "description": "Switch pin of the integrated 6A, 40mΩ boost power switch (second switch-node pin, bonded in parallel with pin 1); the absolute maximum SW voltage is -0.3 to 26V."
      },
      {
        "number": "3",
        "name": "PVDD",
        "type": "power_in",
        "description": "Input power supply pin, to be connected to Cin placed as close as possible to the pin; supply voltage range is 2.7 to 5.5V with absolute maximum VIN of -0.3 to 6.5V."
      },
      {
        "number": "4",
        "name": "AVDD",
        "type": "power_in",
        "description": "Boost IC logic power supply pin; if located far from Cin, add one 1uF MLCC placed close to the pin."
      },
      {
        "number": "5",
        "name": "EN",
        "type": "input",
        "description": "Shutdown control input; connect to a logic high level to enable the device, with an enable threshold of 0.3 to 1.5V (typ. 1V)."
      },
      {
        "number": "6",
        "name": "FB",
        "type": "input",
        "description": "Feedback pin for the internal resistor divider; regulated feedback voltage is 1.21 to 1.27V (typ. 1.24V), and the FB network should be placed close to the load and far from the switching node."
      },
      {
        "number": "7",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground; should be tied together with PGND and the exposed pad through a broad ground plane."
      },
      {
        "number": "8",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground; should be connected to AGND and the exposed pad with low resistance for low Rds(on), high efficiency and good heat dissipation."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet calls the package 'SOP-PP 8' and 'SOP8-PP' (8 pins plus exposed pad), not 'ESOP-8' lit; The exposed pad is printed as 'EPAD' rather than a numbered pin, so it is listed with number 'EPAD'.; Figure 3 (PIN Configuration) is an image and is not in the extracted text, so pin placement and orie",
          "exposed pad 9 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 11,
        "cost_usd": 0.0463,
        "at": "2026-10-18T01:08:14"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588918666553802752",
        "pages": 11,
        "sha256": "0fceac6eff1d1da0",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "xr2682.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.9,
          4.9,
          1.65
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f1718a42c5ea007e8e2dd672ac39a1bb358ee4849bd53c42e21ce83e0e5df7a9",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "xr2682-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.9,
          4.9,
          1.65
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b9a0df96332acec63d758c0375a916fd7d43cc15a4a077385bef3d67c27c2fbd",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}