XMC8P53S6

{
  "slug": "xmc8p53s6",
  "version": "0.1.0",
  "type": "component",
  "description": "Shenzhen Fuman Microcontrollers (MCU/MPU/SOC), SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "embedded processors & controllers",
    "xmc8p53s6",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "xmc8p53s6.kicad_sym",
    "xmc8p53s6.kicad_mod",
    "xmc8p53s6.glb",
    "xmc8p53s6.step",
    "xmc8p53s6.lbr",
    "docs/hero.png",
    "docs/xmc8p53s6-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "xmc8p53s6-hero.glb",
    "xmc8p53s6-hero.overlay.json",
    "xmc8p53s6-etched.glb"
  ],
  "component": {
    "mpn": "XMC8P53S6",
    "manufacturer": "Shenzhen Fuman",
    "package": "SOT-23-6",
    "pin_count": 6,
    "category": "Embedded Processors & Controllers",
    "subcategory": "Microcontrollers (MCU/MPU/SOC)",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588944120773545984",
    "parts": {
      "symbol": "xmc8p53s6.kicad_sym",
      "footprint": "xmc8p53s6.kicad_mod",
      "model_3d": "xmc8p53s6-hero.glb",
      "model_3d_plain": "xmc8p53s6-etched.glb",
      "model_3d_step": "xmc8p53s6-etched.step",
      "model_3d_step_plain": "xmc8p53s6.step",
      "lbr": "xmc8p53s6.lbr"
    },
    "distributor_links": {
      "lcsc": "C2840141"
    },
    "distributor_check": {
      "checked_at": "2026-10-17T17:16:06Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "P61/SCL",
        "type": "bidirectional",
        "description": "General-purpose bidirectional I/O with programmable pull-up/pull-down (pull-down available on P60-P62) or open-drain output, forced to SCL in test mode, and a pin change can wake the MCU from sleep."
      },
      {
        "number": "2",
        "name": "VSS",
        "type": "power_in",
        "description": "Negative power supply (ground) pin, the 0 V reference for VDD."
      },
      {
        "number": "3",
        "name": "P62/TCC/CLK_OUT/CLK_TEST",
        "type": "bidirectional",
        "description": "General-purpose bidirectional I/O that can be reused as the external TCC input, as the internal RC clock output (divide-by-2), or as a clock test pin, with programmable pull-up/pull-down or open-drain and sleep wake-up on pin change."
      },
      {
        "number": "4",
        "name": "P63/RESET_N/VPP",
        "type": "bidirectional",
        "description": "General-purpose bidirectional I/O that can be reused as an active-low external RESET_N pin (internal pull-up forced on) or as the OTP_VPP input in test mode, and is open-drain when configured as an output."
      },
      {
        "number": "5",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive power supply pin; recommended operating range is 2 V to 5 V, must not exceed the 5.5 V limit, and requires a 0.1 µF decoupling capacitor (a 100 Ω series resistor is required when operating above 4 V)."
      },
      {
        "number": "6",
        "name": "P60/INT/SDA",
        "type": "bidirectional",
        "description": "General-purpose bidirectional I/O that can be reused as the external interrupt INT (rising or falling edge selectable), forced to SDA in test mode, with programmable pull-up/pull-down or open-drain and sleep wake-up on pin change."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet pin table (page 2) gives two pin numbers per function: an SOP-8 number and an SOT23-6 ; P64 and P65 are listed only with SOP-8 numbers (3 and 2) and no SOT23-6 number, so they are not pres; The datasheet does not state a per-pin voltage or current limit for each I/O; the pin descriptions c"
        ],
        "pages_sent": 22,
        "cost_usd": 0.094,
        "at": "2026-10-17T17:14:11"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588944120773545984",
        "pages": 22,
        "sha256": "37c9867a11510c48",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "xmc8p53s6.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "xmc8p53s6-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c7c18e6146316ce3b1b7abd156e6d6b090285f749d2e4c17b6ab13c5d5ebed37",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}