main
Ray
Publish 0.1.0
cedeada
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288
{
"slug": "xl9555d",
"version": "0.1.0",
"type": "component",
"description": "XINLUDA I/O Expanders, SOP-24-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"interface",
"xl9555d",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"xl9555d.kicad_sym",
"xl9555d.kicad_mod",
"xl9555d.glb",
"xl9555d.step",
"xl9555d.lbr",
"docs/hero.png",
"docs/xl9555d-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"xl9555d-hero.glb",
"xl9555d-hero.overlay.json",
"xl9555d-etched.glb"
],
"component": {
"mpn": "XL9555D",
"manufacturer": "XINLUDA",
"package": "SOP-24-300mil",
"pin_count": 24,
"category": "Interface",
"subcategory": "I/O Expanders",
"datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603010256750997504",
"parts": {
"symbol": "xl9555d.kicad_sym",
"footprint": "xl9555d.kicad_mod",
"model_3d": "xl9555d-hero.glb",
"model_3d_plain": "xl9555d-etched.glb",
"model_3d_step": "xl9555d-etched.step",
"model_3d_step_plain": "xl9555d.step",
"lbr": "xl9555d.lbr"
},
"distributor_links": {
"lcsc": "C5444302"
},
"distributor_check": {
"checked_at": "2026-10-18T21:14:29Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "quota"
},
"mouser": {
"pn": null,
"status": "quota"
}
},
"pins": [
{
"number": "1",
"name": "INT",
"type": "output",
"description": "Open-drain active-LOW interrupt output that must be connected to VCC through a pull-up resistor."
},
{
"number": "2",
"name": "A1",
"type": "input",
"description": "Address input 1 that must be connected directly to VCC or ground and must not change while the device is powered."
},
{
"number": "3",
"name": "A2",
"type": "input",
"description": "Address input 2 that must be connected directly to VCC or ground and must not change while the device is powered."
},
{
"number": "4",
"name": "P00",
"type": "bidirectional",
"description": "Port 0 push-pull (totem-pole) I/O that powers up as an input; each I/O is limited to 25 mA maximum and the input may be raised to 5.5 V."
},
{
"number": "5",
"name": "P01",
"type": "bidirectional",
"description": "Port 0 push-pull (totem-pole) I/O that powers up as an input; each I/O is limited to 25 mA maximum and the input may be raised to 5.5 V."
},
{
"number": "6",
"name": "P02",
"type": "bidirectional",
"description": "Port 0 push-pull (totem-pole) I/O that powers up as an input; each I/O is limited to 25 mA maximum and the input may be raised to 5.5 V."
},
{
"number": "7",
"name": "P03",
"type": "bidirectional",
"description": "Port 0 push-pull (totem-pole) I/O that powers up as an input; each I/O is limited to 25 mA maximum and the input may be raised to 5.5 V."
},
{
"number": "8",
"name": "P04",
"type": "bidirectional",
"description": "Port 0 push-pull (totem-pole) I/O that powers up as an input; each I/O is limited to 25 mA maximum and the input may be raised to 5.5 V."
},
{
"number": "9",
"name": "P05",
"type": "bidirectional",
"description": "Port 0 push-pull (totem-pole) I/O that powers up as an input; each I/O is limited to 25 mA maximum and the input may be raised to 5.5 V."
},
{
"number": "10",
"name": "P06",
"type": "bidirectional",
"description": "Port 0 push-pull (totem-pole) I/O that powers up as an input; each I/O is limited to 25 mA maximum and the input may be raised to 5.5 V."
},
{
"number": "11",
"name": "P07",
"type": "bidirectional",
"description": "Port 0 push-pull (totem-pole) I/O that powers up as an input; each I/O is limited to 25 mA maximum and the input may be raised to 5.5 V."
},
{
"number": "12",
"name": "GND",
"type": "power_in",
"description": "Supply ground that must be connected to system ground for proper device operation."
},
{
"number": "13",
"name": "P10",
"type": "bidirectional",
"description": "Port 1 push-pull (totem-pole) I/O that powers up as an input; each I/O is limited to 25 mA maximum and the input may be raised to 5.5 V."
},
{
"number": "14",
"name": "P11",
"type": "bidirectional",
"description": "Port 1 push-pull (totem-pole) I/O that powers up as an input; each I/O is limited to 25 mA maximum and the input may be raised to 5.5 V."
},
{
"number": "15",
"name": "P12",
"type": "bidirectional",
"description": "Port 1 push-pull (totem-pole) I/O that powers up as an input; each I/O is limited to 25 mA maximum and the input may be raised to 5.5 V."
},
{
"number": "16",
"name": "P13",
"type": "bidirectional",
"description": "Port 1 push-pull (totem-pole) I/O that powers up as an input; each I/O is limited to 25 mA maximum and the input may be raised to 5.5 V."
},
{
"number": "17",
"name": "P14",
"type": "bidirectional",
"description": "Port 1 push-pull (totem-pole) I/O that powers up as an input; each I/O is limited to 25 mA maximum and the input may be raised to 5.5 V."
},
{
"number": "18",
"name": "P15",
"type": "bidirectional",
"description": "Port 1 push-pull (totem-pole) I/O that powers up as an input; each I/O is limited to 25 mA maximum and the input may be raised to 5.5 V."
},
{
"number": "19",
"name": "P16",
"type": "bidirectional",
"description": "Port 1 push-pull (totem-pole) I/O that powers up as an input; each I/O is limited to 25 mA maximum and the input may be raised to 5.5 V."
},
{
"number": "20",
"name": "P17",
"type": "bidirectional",
"description": "Port 1 push-pull (totem-pole) I/O that powers up as an input; each I/O is limited to 25 mA maximum and the input may be raised to 5.5 V."
},
{
"number": "21",
"name": "A0",
"type": "input",
"description": "Address input 0 that must be connected directly to VCC or ground and must not change while the device is powered."
},
{
"number": "22",
"name": "SCL",
"type": "input",
"description": "I2C-bus serial clock line that must be connected to VCC through a pull-up resistor; supports up to 400 kHz fast-mode."
},
{
"number": "23",
"name": "SDA",
"type": "bidirectional",
"description": "I2C-bus serial data line that must be connected to VCC through a pull-up resistor."
},
{
"number": "24",
"name": "VCC",
"type": "power_in",
"description": "Supply voltage with a recommended operating range of 2.3 V to 5.5 V."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Pin numbers were taken from the 'SOP/SSOP/TSSOP' column of Table 2 (Pin Functions) on page 3, since ; The datasheet describes INT as open-drain and SDA as an I2C bidirectional line, but the text does no; The datasheet calls SCL a serial clock line and gives I2C timing but does not state its pin directio"
],
"pages_sent": 25,
"cost_usd": 0.0999,
"at": "2026-10-18T21:07:58"
},
"datasheet": {
"url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603010256750997504",
"pages": 25,
"sha256": "8d6805fbf1e452d6",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 24,
"described": 24,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "xl9555d.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
10.46,
15.4,
2.65
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "57c226f19c21b83b4b99d961611c83b563018294c7d59471d71c176d120cb2d8",
"checked": "2026-10-18",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "xl9555d-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
10.46,
15.4,
2.65
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "4588f2472dbefc646d4cb51bbcbffbd3a200aa842ddae10c3019c4d074cbe2ba",
"checked": "2026-10-18",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}