main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers xl9555d: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
xl9555d-etched.glb Publish 0.1.0 · Ray
xl9555d-etched.step xl9555d: factory component page (tier=lcsc) · Ray
xl9555d-hero.glb xl9555d: hero GLB from the etched model (keeps the MPN mark) · Ray
xl9555d-hero.overlay.json Publish 0.1.0 · Ray
xl9555d.glb Publish 0.1.0 · Ray
xl9555d.kicad_mod Publish 0.1.0 · Ray
xl9555d.kicad_sym Publish 0.1.0 · Ray
xl9555d.lbr Publish 0.1.0 · Ray
xl9555d.step Publish 0.1.0 · Ray

XL9555D

XINLUDA · I/O Expanders · SOP-24-300mil

XL9555D from XINLUDA, in a SOP-24-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 INT output Open-drain active-LOW interrupt output that must be connected to VCC through a pull-up resistor.
2 A1 input Address input 1 that must be connected directly to VCC or ground and must not change while the device is powered.
3 A2 input Address input 2 that must be connected directly to VCC or ground and must not change while the device is powered.
4 P00 bidirectional Port 0 push-pull (totem-pole) I/O that powers up as an input; each I/O is limited to 25 mA maximum and the input may be raised to 5.5 V.
5 P01 bidirectional Port 0 push-pull (totem-pole) I/O that powers up as an input; each I/O is limited to 25 mA maximum and the input may be raised to 5.5 V.
6 P02 bidirectional Port 0 push-pull (totem-pole) I/O that powers up as an input; each I/O is limited to 25 mA maximum and the input may be raised to 5.5 V.
7 P03 bidirectional Port 0 push-pull (totem-pole) I/O that powers up as an input; each I/O is limited to 25 mA maximum and the input may be raised to 5.5 V.
8 P04 bidirectional Port 0 push-pull (totem-pole) I/O that powers up as an input; each I/O is limited to 25 mA maximum and the input may be raised to 5.5 V.
9 P05 bidirectional Port 0 push-pull (totem-pole) I/O that powers up as an input; each I/O is limited to 25 mA maximum and the input may be raised to 5.5 V.
10 P06 bidirectional Port 0 push-pull (totem-pole) I/O that powers up as an input; each I/O is limited to 25 mA maximum and the input may be raised to 5.5 V.
11 P07 bidirectional Port 0 push-pull (totem-pole) I/O that powers up as an input; each I/O is limited to 25 mA maximum and the input may be raised to 5.5 V.
12 GND power_in Supply ground that must be connected to system ground for proper device operation.
13 P10 bidirectional Port 1 push-pull (totem-pole) I/O that powers up as an input; each I/O is limited to 25 mA maximum and the input may be raised to 5.5 V.
14 P11 bidirectional Port 1 push-pull (totem-pole) I/O that powers up as an input; each I/O is limited to 25 mA maximum and the input may be raised to 5.5 V.
15 P12 bidirectional Port 1 push-pull (totem-pole) I/O that powers up as an input; each I/O is limited to 25 mA maximum and the input may be raised to 5.5 V.
16 P13 bidirectional Port 1 push-pull (totem-pole) I/O that powers up as an input; each I/O is limited to 25 mA maximum and the input may be raised to 5.5 V.
17 P14 bidirectional Port 1 push-pull (totem-pole) I/O that powers up as an input; each I/O is limited to 25 mA maximum and the input may be raised to 5.5 V.
18 P15 bidirectional Port 1 push-pull (totem-pole) I/O that powers up as an input; each I/O is limited to 25 mA maximum and the input may be raised to 5.5 V.
19 P16 bidirectional Port 1 push-pull (totem-pole) I/O that powers up as an input; each I/O is limited to 25 mA maximum and the input may be raised to 5.5 V.
20 P17 bidirectional Port 1 push-pull (totem-pole) I/O that powers up as an input; each I/O is limited to 25 mA maximum and the input may be raised to 5.5 V.
21 A0 input Address input 0 that must be connected directly to VCC or ground and must not change while the device is powered.
22 SCL input I2C-bus serial clock line that must be connected to VCC through a pull-up resistor; supports up to 400 kHz fast-mode.
23 SDA bidirectional I2C-bus serial data line that must be connected to VCC through a pull-up resistor.
24 VCC power_in Supply voltage with a recommended operating range of 2.3 V to 5.5 V.

Key specifications

Parameter Value
Manufacturer XINLUDA
Package SOP-24-300mil
Category Interface
Pins 24

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage range VCC -0.5 6 V 4
Input pin voltage range VIN -0.5 6 V 4
Output pin voltage range VO -0.5 6 V 4
Input clamp current IIK -20 mA VIN<0 4
Output clamp current IOK -20 mA VO<0 4
Input/output clamp current IIOK -20 20 mA VO<0 or VO>VCC 4
Continuous output low current IOL 50 mA VO = 0 to VCC 4
Continuous output high current IOH -50 mA VO = 0 to VCC 4
Continuous current through GND ICC -250 mA 4
Continuous current through VCC 160 mA 4
Total power dissipation Ptot 200 mW 4
Storage temperature range Tstg -65 150 ℃ 4
Ambient temperature range Tamb -40 85 ℃ Operating 4
Supply voltage VCC 2.3 5.5 V VCC(MAX) = 5.5V 5
Low-level input voltage, SCL/SDA (min; max 0.3×VCC not numeric) VIL -0.5 V SCL, SDA 5
Low-level input voltage, A2-A0/P07-P00/P17-P10 (min; max 0.3×VCC not numeric) VIL -0.5 V A2-A0, P07-P00, P17-P10 5
High-level output current IOH -10 mA P07-P00, P17-P10 5
Low-level output current IOL 25 mA P07-P00, P17-P10 5
Operating free-air temperature TA -40 85 ℃ 5
Supply current, operating mode (XL9555) ICC 135 200 μA I/O = inputs, fSCL = 100 kHz, IO = 0, No load; VCC 5.5 V 5
Standby current, standby mode, VIN=GND (XL9555) ISTB 1.1 1.5 mA VIN = GND, I/O = inputs, fSCL = 0 kHz, IO = 0, No load; VCC 5.5 V 6
Standby current, standby mode, VIN=VCC (XL9555) ISTB 0.25 1 μA VIN = VCC, I/O = inputs, fSCL = 0 kHz, IO = 0, No load; VCC 5.5 V 6
Additional current in standby mode (XL9555) ΔICC 1.5 mA One input at VCC - 0.6 V, Other inputs at VCC or GND; VCC 2.3 V to 5.5 V 6
Power-on reset voltage, VCC rising VPORR 1.7 2.2 V VIN = VCC or GND, IO = 0, no load 6
Power-on reset voltage, VCC falling VPORF 0.7 1 V VIN = VCC or GND, IO = 0, no load 6
LOW-level input voltage, SCL/SDA (min; max 0.3×VCC not numeric) VIL -0.5 V 2.3 V to 5.5 V 6
HIGH-level input voltage, SCL/SDA (max) VIH 5.5 V 2.3 V to 5.5 V 6
LOW-level output current, SCL/SDA IOL 3 mA VOL = 0.4 V; 2.3 V to 5.5 V 6
Leakage current, SCL/SDA IL -1 1 μA VIN = VCC or GND; 2.3 V to 5.5 V 6
Input capacitance, SCL/SDA CI 6 10 pF VIN = GND; 2.3 V to 5.5 V 6
LOW-level input voltage, I/Os (min; max 0.3×VCC not numeric) VIL -0.5 V 2.3 V to 5.5 V 6
HIGH-level input voltage, I/Os (max) VIH 5.5 V 2.3 V to 5.5 V 6
LOW-level output current, I/Os (XL9555) IOL 8 mA VOL = 0.5 V; 2.3 V to 5.5 V 6
LOW-level output current, I/Os (XL9555) IOL 10 mA VOL = 0.7 V; 2.3 V to 5.5 V 6
HIGH-level output voltage VOH 1.8 V IOH = -8 mA, VCC = 2.3 V 6
HIGH-level output voltage VOH 2.6 V IOH = -8 mA, VCC = 3 V 6
HIGH-level output voltage VOH 4.1 V IOH = -8 mA, VCC = 4.75 V 6
HIGH-level output voltage VOH 1.7 V IOH = -10 mA, VCC = 2.3 V 6
HIGH-level output voltage VOH 2.5 V IOH = -10 mA, VCC = 3 V 6
HIGH-level output voltage VOH 4 V IOH = -10 mA, VCC = 4.75 V 6
HIGH-level input leakage current ILIH 1 μA VIN = VCC; 5.5 V 6
LOW-level input leakage current (XL9555) ILIL -100 μA VIN = GND; 5.5 V 6
Input capacitance, I/Os CI 3.7 5 pF VCC 2.3 V to 5.5 V 6
Output capacitance, I/Os CO 3.7 5 pF VCC 2.3 V to 5.5 V 6
Interrupt LOW-level output current IOL 3 mA VOL = 0.4 V; 2.3 V to 5.5 V 6
Output capacitance, INT CO 3.7 5 pF VCC 2.3 V to 5.5 V 6
LOW-level input voltage, A2-A0 (min; max 0.3×VCC not numeric) VIL -0.5 V 2.3 V to 5.5 V 7
HIGH-level input voltage, A2-A0 (max) VIH 5.5 V 2.3 V to 5.5 V 7
Leakage current, A2-A0 IL -1 1 μA VIN = VCC or GND; 2.3 V to 5.5 V 7
Input capacitance, A2-A0 CI 2.5 5 pF 2.3 V to 5.5 V 7
SCL clock frequency, standard mode fSCL 0 100 kHz Standard-mode 7
SCL clock frequency, fast mode fSCL 0 400 kHz Fast-mode 7
Data set-up time, standard mode tSU:DAT 250 ns Standard-mode 7
Data set-up time, fast mode tSU:DAT 100 ns Fast-mode 7
Data valid time, standard mode tVD:DAT 300 ns Standard-mode; minimum time for SDA data out valid following SCL LOW 7
Data valid time, fast mode tVD:DAT 50 ns Fast-mode; minimum time for SDA data out valid following SCL LOW 7
Interrupt valid time, standard mode tiv(INT_N) 4 μs Standard-mode 7
Interrupt valid time, fast mode tiv(INT_N) 4 μs Fast-mode 7
Thermal resistance, junction-to-ambient, SOP24 RθJA 108.8 ℃/W Measured with minimum pad spacing on FR4 PCB, 10 mm by 1 inch, 2 oz copper trace, no air flow 5

CAD (KiCad official)

  • Symbol: XL9555D
  • Footprint: Package_SO:SOP-24_7.5x15.4mm_P1.27mm
  • 3D model: SOP-24-300mil, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 2.65 mm nominal SOIC height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: xl9555d-etched.step / xl9555d-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xl9555d.step / xl9555d.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: XINLUDA datasheet (25 pp, sha256 8d6805fbf1e452d6, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF