main
History Download
Ray Publish 0.1.0 67f811a

XL75176AP

XINLUDA · RS-485 / RS-422 ICs · DIP-8

XL75176AP from XINLUDA, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 R output Logic data output from the RS-485 receiver; it is high for VID ≥ 0.2 V, low for VID ≤ -0.2 V, and high impedance when the receiver is disabled (RE high).
2 RE input Receive enable, active low; driving RE high puts receiver output R into the high-impedance state.
3 DE input Driver enable, active high; when DE is low the driver differential outputs A and B are high impedance, and VIH/VIL limits for DE are 2 V / 0.8 V.
4 D input Logic data input to the RS-485 driver; with DE high, a high level on D drives A high and B low, and a low level drives A low and B high.
5 GND power_in Device ground pin; all voltages except the differential bus voltage are referenced to the network ground terminal.
6 A bidirectional Non-inverting RS-422/RS-485 differential bus terminal; recommended voltage range at any bus terminal is -7 V to 12 V and absolute maximum is -10 V to 15 V.
7 B bidirectional Inverting RS-422/RS-485 differential bus terminal; recommended voltage range at any bus terminal is -7 V to 12 V and absolute maximum is -10 V to 15 V.
8 VCC power_in Power input to be connected to a 5-V supply; recommended supply range is 4.75 V to 5.25 V with absolute maximum of 7 V.

Key specifications

Parameter Value
Manufacturer XINLUDA
Package DIP-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC Supply Voltage VCC 7 V 4
Voltage range at any bus terminal -10 15 V 4
Enable input voltage VI 5.5 V 4
Operating free-air temperature range TA -40 85 °C 4
Storage temperature range Tstg 65 150 °C 4
VCC Supply Voltage VCC 4.75 5 5.25 V 4
Voltage at any bus terminal (separately or common mode) VI or VIC -7 12 V separately or common mode 4
High-level input voltage VIH 2 V D, DE, and RE 4
Low-level input voltage VIL 0.8 V D, DE, and RE 4
Differential input voltage VID -12 12 V Differential bus voltage measured at A with respect to B 4
High-level output current IOH -60 mA Driver 4
High-level output current IOH -400 µA Receiver 4
Low-level output current IOL 60 mA Driver 4
Low-level output current IOL 8 mA Receiver 4
Operating free-air temperature TA 0 70 °C 4
High-level output voltage VOH 3.7 V VIH = 2 V, VIL = 0.8 V, IOH = -33 mA 5
Low-level output voltage VOL 1.1 V VIH = 2 V, VIL = 0.8 V, IOH = 33 mA 5
Input clamp voltage VIK -1.5 V II = -18 mA 5
Differential output voltage /VOD2/ 2 2.7 V RL = 100 Ω, see Figure 8 5
Differential output voltage /VOD2/ 1.5 2.4 V RL = 54 Ω, see Figure 8 5
Change in magnitude of differential output voltage Δ/VOD/ -0.2 0.2 V Input changed from high level to low level 5
Common-mode output voltage VOC 3 V RL = 54 Ω or 100 Ω, see Figure 8 5
Change in magnitude of common-mode output voltage Δ/VOC/ -0.2 0.2 V Input changed from high level to low level 5
Output current, output disabled IO 1 mA Output disabled, VO = 12 V 5
Output current, output disabled IO -0.8 mA Output disabled, VO = -7 V 5
High-level input current IIH 20 µA VI = 2.4 V 5
Low-level input current IIL -400 µA VI = 0.4 V 5
Short-circuit output current IOS -250 mA VO = -7 V 5
Short-circuit output current IOS 250 mA VO = VCC 5
Short-circuit output current IOS 500 mA VO = 12 V 5
Supply current (total package) ICC 35 50 mA No load, outputs enabled 5
Supply current (total package) ICC 26 40 mA No load, outputs disabled 5
Positive-going input threshold voltage VIT+ 0.2 V VO = 2.7 V, IO = -0.4 mA 5
Negative-going input threshold voltage VIT- -0.2 V VO = 0.5 V, IO = 8 mA 5
Input hysteresis voltage (VIT+, VIT-) Vhys 50 mV 5
Enable clamp voltage VIK -1.5 V II = -18 mA 5
High-level output voltage VOH 2.7 V VID = 200 mV, IOH = -400 µA, See Figure 9 5
Low-level output voltage VOL 0.45 V VID = 200 mV, IOH = 8 mA, See Figure 9 5
High-impedance-state output current IOZ -20 20 µA VO = 0.4 V to 2.4 V 5
Line input current II 1 mA Other input = 0 V, VI = 12 V 5
Line input current II -0.8 mA Other input = 0 V, VI = -7 V 5
High-level enable input current IIH 20 µA VIH = 2.7 V 5
Low-level enable input current IIL -100 µA VIL = 0.4 V 5
Input resistance ri 12 kΩ 5
Short-circuit output current IOS -15 -85 mA 5
Differential-output delay time td(OD) 40 60 ns VCC = 5 V, TA = 25°C; RL = 60 Ω, See Figure 10 6
Differential-output transition time tt(OD) 65 95 ns VCC = 5 V, TA = 25°C; RL = 60 Ω, See Figure 10 6
Output enable time to high level tPZH 55 90 ns VCC = 5 V, TA = 25°C; RL = 110 Ω, See Figure 11 6
Output enable time to low level tPZL 30 50 ns VCC = 5 V, TA = 25°C; RL = 110 Ω, See Figure 12 6
Output disable time from high level tPHZ 85 130 ns VCC = 5 V, TA = 25°C; RL = 110 Ω, See Figure 11 6
Output disable time from low level tPLZ 20 40 ns VCC = 5 V, TA = 25°C; RL = 110 Ω, See Figure 12 6
Propagation delay time, low-to-high-level output tPLH 21 35 ns VCC = 5 V, CL = 15 pF, TA = 25°C; VID = -1.5 V to 1.5 V, See Figure 13 6
Propagation delay time, high-to-low-level output tPHL 23 35 ns VCC = 5 V, CL = 15 pF, TA = 25°C; VID = -1.5 V to 1.5 V, See Figure 13 6
Output enable time to high level tPZH 10 30 ns VCC = 5 V, CL = 15 pF, TA = 25°C; See Figure 14 6
Output enable time to low level tPZL 12 30 ns VCC = 5 V, CL = 15 pF, TA = 25°C; See Figure 14 6
Output disable time from high level tPHZ 20 35 ns VCC = 5 V, CL = 15 pF, TA = 25°C; See Figure 14 6
Output disable time from low level tPLZ 17 25 ns VCC = 5 V, CL = 15 pF, TA = 25°C; See Figure 14 6
Junction-to-ambient thermal resistance (P package, DIP-8) RθJA 113 °C/W P package (8 pins) 4

CAD (KiCad official)

  • Symbol: XL75176AP
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: xl75176ap-etched.step / xl75176ap-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xl75176ap.step / xl75176ap.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: XINLUDA datasheet (16 pp, sha256 db47aae6c7daf71b, retrieved 2026-10-16, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF