main
Ray
Publish 0.3.0
77ff83b
XL3005E1
3D generated from the datasheet; KiCad's model does not fit this maker's body.
XLSEMI · LED Drivers · TO-263-5
XL3005E1 from XLSEMI, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference pin for the device. Connect directly to system ground with a low-impedance return path. |
| 2 | CS | input | Output current-sense feedback input. Regulates the LED current by servoing the voltage across the external RCS sense resistor to the internal 0.21V reference (IOUT = 0.21V / RCS). |
| 3 | SW | passive | Power-switch output / inductor switch node. Drain of the internal high-side power MOSFET; connect to the buck inductor and catch diode. The metal tab of the TO263-5L package is electrically SW. |
| 4 | VC | input | Internal LDO / bootstrap bypass pin. Connect a 1 µF bypass capacitor between VIN and VC in typical applications to decouple the internal regulator. |
| 5 | VIN | power_in | Main DC power input, 8V to 36V (absolute maximum 40V). Bypass to GND with an electrolytic capacitor (e.g. 220 µF/50V) close to the pin to suppress input noise. |
| 6 | SW | passive | Package tab (pad 6). printed: pin 3 SW, 金属片电气属性是 SW (the metal tab is electrically SW). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XLSEMI |
| Package | TO-263-5 |
| Category | LED-drv |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | Vin | -0.3 | 40 | V | 4 | ||
| Switch pin voltage | VSW | -0.3 | V | max = VIN (printed as 'to VIN') | 4 | ||
| Current sense pin voltage | VCS | -0.3 | V | max = VIN (printed as 'to VIN') | 4 | ||
| Maximum junction temperature | TJ | -40 | 150 | ºC | 4 | ||
| Storage temperature range | TSTG | -65 | 150 | ºC | 4 | ||
| Lead temperature (soldering) | TLEAD | 260 | ºC | soldering 10 s | 4 | ||
| ESD human body model | 2000 | V | human body model; printed as >2000 | 4 | |||
| Thermal resistance junction to ambient (TO263-5L) | RJA | 30 | ºC/W | junction to ambient, no external heatsink | 4 | ||
| Operating junction temperature | TJ | -40 | 125 | ºC | 4 | ||
| PWM dimming high level | 3.3 | V | referenced to GND, less than VIN | 13 | |||
| PWM dimming low level | 0.2 | V | referenced to GND | 13 | |||
| CS voltage | VCS | 203.7 | 210 | 216.3 | mV | Vin=8V to 36V, Vout=6.4V, Iload=0.1A to 4A | 5 |
| Input voltage | Vin | 8 | 36 | V | 5 | ||
| Input undervoltage lockout | Vin_uvlo | 5 | V | 5 | |||
| Quiescent supply current | Iq | 2.1 | 5 | mA | VCS=2V | 5 | |
| Oscillator frequency | Fosc | 176 | 220 | 264 | KHz | 5 | |
| Output short-circuit frequency | Fshort | 48 | 60 | 72 | KHz | 5 | |
| Switch current limit | IL | 7 | A | VCS=0 | 5 | ||
| Power MOS on-resistance | Rdson | 60 | 80 | mohm | Vin=12V, ISW=5A | 5 | |
| Maximum duty cycle | DMAX | 100 | % | VCS=0V | 5 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
XL3005E1 - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5, generated on the KiCad land (body 8.64 x 10.16 mm, terminals on the pads, 4.545 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
xl3005e1-etched.step/xl3005e1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xl3005e1.step/xl3005e1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XLSEMI datasheet (15 pp, sha256
064cf2401d458a5c, retrieved 2026-11-17, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# XL3005E1
> 3D generated from the datasheet; KiCad's model does not fit this maker's body.
**XLSEMI** · LED Drivers · TO-263-5
XL3005E1 from XLSEMI, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference pin for the device. Connect directly to system ground with a low-impedance return path. |
| 2 | CS | input | Output current-sense feedback input. Regulates the LED current by servoing the voltage across the external RCS sense resistor to the internal 0.21V reference (IOUT = 0.21V / RCS). |
| 3 | SW | passive | Power-switch output / inductor switch node. Drain of the internal high-side power MOSFET; connect to the buck inductor and catch diode. The metal tab of the TO263-5L package is electrically SW. |
| 4 | VC | input | Internal LDO / bootstrap bypass pin. Connect a 1 µF bypass capacitor between VIN and VC in typical applications to decouple the internal regulator. |
| 5 | VIN | power_in | Main DC power input, 8V to 36V (absolute maximum 40V). Bypass to GND with an electrolytic capacitor (e.g. 220 µF/50V) close to the pin to suppress input noise. |
| 6 | SW | passive | Package tab (pad 6). printed: pin 3 SW, 金属片电气属性是 SW (the metal tab is electrically SW). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XLSEMI |
| Package | TO-263-5 |
| Category | LED-drv |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | Vin | -0.3 | | 40 | V | | 4 |
| Switch pin voltage | VSW | -0.3 | | | V | max = VIN (printed as 'to VIN') | 4 |
| Current sense pin voltage | VCS | -0.3 | | | V | max = VIN (printed as 'to VIN') | 4 |
| Maximum junction temperature | TJ | -40 | | 150 | ºC | | 4 |
| Storage temperature range | TSTG | -65 | | 150 | ºC | | 4 |
| Lead temperature (soldering) | TLEAD | | | 260 | ºC | soldering 10 s | 4 |
| ESD human body model | | 2000 | | | V | human body model; printed as >2000 | 4 |
| Thermal resistance junction to ambient (TO263-5L) | RJA | | 30 | | ºC/W | junction to ambient, no external heatsink | 4 |
| Operating junction temperature | TJ | -40 | | 125 | ºC | | 4 |
| PWM dimming high level | | 3.3 | | | V | referenced to GND, less than VIN | 13 |
| PWM dimming low level | | | | 0.2 | V | referenced to GND | 13 |
| CS voltage | VCS | 203.7 | 210 | 216.3 | mV | Vin=8V to 36V, Vout=6.4V, Iload=0.1A to 4A | 5 |
| Input voltage | Vin | 8 | | 36 | V | | 5 |
| Input undervoltage lockout | Vin_uvlo | | 5 | | V | | 5 |
| Quiescent supply current | Iq | | 2.1 | 5 | mA | VCS=2V | 5 |
| Oscillator frequency | Fosc | 176 | 220 | 264 | KHz | | 5 |
| Output short-circuit frequency | Fshort | 48 | 60 | 72 | KHz | | 5 |
| Switch current limit | IL | | 7 | | A | VCS=0 | 5 |
| Power MOS on-resistance | Rdson | | 60 | 80 | mohm | Vin=12V, ISW=5A | 5 |
| Maximum duty cycle | DMAX | | | 100 | % | VCS=0V | 5 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `XL3005E1`
- Footprint: `Package_TO_SOT_SMD:TO-263-5_TabPin6`
- 3D model: TO-263-5, generated on the KiCad land (body 8.64 x 10.16 mm, terminals on the pads, 4.545 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `xl3005e1-etched.step` / `xl3005e1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xl3005e1.step` / `xl3005e1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [XLSEMI datasheet](docs/xl3005e1-datasheet.pdf) (15 pp, sha256 `064cf2401d458a5c`, retrieved 2026-11-17, tier: manufacturer)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/xl3005e1-datasheet.pdf)