main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs xl3005e1: rebuilt as a full factory component page (was a placeholder) · Ray
viewers xl3005e1: viewers · Ray
package.json Publish 0.3.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.3.0 · Ray
xl3005e1-etched.fit.json xl3005e1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
xl3005e1-etched.glb xl3005e1: rebuilt as a full factory component page (was a placeholder) · Ray
xl3005e1-etched.step xl3005e1: rebuilt as a full factory component page (was a placeholder) · Ray
xl3005e1-hero.glb Publish 0.3.0 · Ray
xl3005e1-hero.overlay.json Publish 0.3.0 · Ray
xl3005e1.glb Publish 0.3.0 · Ray
xl3005e1.kicad_mod Publish 0.1.0 · Ray
xl3005e1.kicad_sym Publish 0.2.0 · Ray
xl3005e1.lbr Publish 0.3.0 · Ray
xl3005e1.step Publish 0.3.0 · Ray

XL3005E1

3D generated from the datasheet; KiCad's model does not fit this maker's body.

XLSEMI · LED Drivers · TO-263-5

XL3005E1 from XLSEMI, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 GND power_in Ground reference pin for the device. Connect directly to system ground with a low-impedance return path.
2 CS input Output current-sense feedback input. Regulates the LED current by servoing the voltage across the external RCS sense resistor to the internal 0.21V reference (IOUT = 0.21V / RCS).
3 SW passive Power-switch output / inductor switch node. Drain of the internal high-side power MOSFET; connect to the buck inductor and catch diode. The metal tab of the TO263-5L package is electrically SW.
4 VC input Internal LDO / bootstrap bypass pin. Connect a 1 µF bypass capacitor between VIN and VC in typical applications to decouple the internal regulator.
5 VIN power_in Main DC power input, 8V to 36V (absolute maximum 40V). Bypass to GND with an electrolytic capacitor (e.g. 220 µF/50V) close to the pin to suppress input noise.
6 SW passive Package tab (pad 6). printed: pin 3 SW, 金属片电气属性是 SW (the metal tab is electrically SW).

Key specifications

Parameter Value
Manufacturer XLSEMI
Package TO-263-5
Category LED-drv
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage Vin -0.3 40 V 4
Switch pin voltage VSW -0.3 V max = VIN (printed as 'to VIN') 4
Current sense pin voltage VCS -0.3 V max = VIN (printed as 'to VIN') 4
Maximum junction temperature TJ -40 150 ºC 4
Storage temperature range TSTG -65 150 ºC 4
Lead temperature (soldering) TLEAD 260 ºC soldering 10 s 4
ESD human body model 2000 V human body model; printed as >2000 4
Thermal resistance junction to ambient (TO263-5L) RJA 30 ºC/W junction to ambient, no external heatsink 4
Operating junction temperature TJ -40 125 ºC 4
PWM dimming high level 3.3 V referenced to GND, less than VIN 13
PWM dimming low level 0.2 V referenced to GND 13
CS voltage VCS 203.7 210 216.3 mV Vin=8V to 36V, Vout=6.4V, Iload=0.1A to 4A 5
Input voltage Vin 8 36 V 5
Input undervoltage lockout Vin_uvlo 5 V 5
Quiescent supply current Iq 2.1 5 mA VCS=2V 5
Oscillator frequency Fosc 176 220 264 KHz 5
Output short-circuit frequency Fshort 48 60 72 KHz 5
Switch current limit IL 7 A VCS=0 5
Power MOS on-resistance Rdson 60 80 mohm Vin=12V, ISW=5A 5
Maximum duty cycle DMAX 100 % VCS=0V 5

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: XL3005E1
  • Footprint: Package_TO_SOT_SMD:TO-263-5_TabPin6
  • 3D model: TO-263-5, generated on the KiCad land (body 8.64 x 10.16 mm, terminals on the pads, 4.545 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: xl3005e1-etched.step / xl3005e1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xl3005e1.step / xl3005e1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: XLSEMI datasheet (15 pp, sha256 064cf2401d458a5c, retrieved 2026-11-17, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF