main
Ray
Publish 0.3.0
f5c81e0
XL2596HVS-5.0E1
3D generated from the datasheet; KiCad's model does not fit this maker's body.
XLSEMI · DC-DC Converters · TO-263-5L
XL2596HVS-5.0E1 from XLSEMI, in a TO-263-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power supply input pin. Supports DC 4.5V to 50V wide input operating range. Requires an electrolytic bypass capacitor between VIN and GND to suppress noise. |
| 2 | SW | passive | Power switch output pin. SW is the switching node of the internal power transistor that drives the external inductor. Absolute maximum voltage -0.3V to VIN. |
| 3 | GND | power_in | Ground pin. Also connected to the exposed metal tab of the TO263-5L package for thermal dissipation. |
| 4 | FB | input | Feedback pin. Senses the output voltage via an internal (fixed-output versions) or external (ADJ version) resistor divider network for regulation. Reference voltage is 1.23V on the ADJ version. Absolute maximum -0.3V to 20V. |
| 5 | EN | input | Enable pin, TTL-compatible. Low level enables operation, high level shuts down the converter; floating is treated as low (enabled). VEN_H >= 1.4V (shutdown), VEN_L <= 0.8V (enable). Absolute maximum -0.3V to 7V. Typical EN pin current 5uA at VEN=2.5V. |
| 6 | GND | power_in | Package tab (pad 6). printed: Metal Tab GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XLSEMI |
| Package | TO-263-5L |
| Category | PMIC |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (XL2596HVS-5.0) | VOUT | 4.925 | 5 | 5.075 | V | VIN=12V, IOUT=0.5A | 4 |
| Operating input voltage | VIN | 4.5 | 50 | V | 5 | ||
| Oscillator frequency | FOSC | 135 | 150 | 165 | KHz | 5 | |
| Shutdown current | IS | 46 | 100 | uA | VEN=2V | 5 | |
| Quiescent supply current | IQ | 1.3 | 2 | mA | 注2:ADJ/3.3V/5.0V版本 VFB=10V | 5 | |
| Switch current limit | IL | 3.2 | A | VFB=0V | 5 | ||
| EN pin threshold voltage, high (shutdown) | VEN_H | 1.4 | V | 高电平(关断) | 5 | ||
| EN pin threshold voltage, low (on) | VEN_L | 0.8 | V | 低电平(开启) | 5 | ||
| EN pin current | IEN | 5 | uA | VEN=2.5V | 5 | ||
| Saturation voltage | VCE | 1.1 | 1.3 | V | VFB=0V, IOUT=2A | 5 | |
| Maximum duty cycle | DMAX | 100 | % | VFB=0V | 5 | ||
| Thermal shutdown temperature | TSD | 180 | ℃ | 5 | |||
| Thermal shutdown hysteresis | TD | 40 | ℃ | 5 | |||
| Input voltage (absolute maximum) | VIN | -0.3 | 60 | V | 3 | ||
| Feedback pin voltage (absolute maximum) | VFB | -0.3 | 20 | V | 3 | ||
| Enable pin voltage (absolute maximum) | VEN | -0.3 | 7 | V | 3 | ||
| Switch output pin voltage (absolute maximum) | VSW | -0.3 | V | 3 | |||
| ESD HBM rating | ESD (HBM) | 8000 | V | 3 | |||
| Operating junction temperature | TJ | -40 | 150 | oC | 3 | ||
| Storage temperature range | TSTG | -65 | 150 | oC | 3 | ||
| Lead temperature (soldering) | TLEAD | 260 | oC | 焊接10秒 | 3 | ||
| Thermal resistance, junction to ambient (TO263-5L) | RJA | 30 | oC /W | 结到环境,无外部散热片 | 3 | ||
| Recommended operating input voltage | 4.5 | 50 | V | 1 | |||
| Ambient operating temperature range (grade 1) | -40 | 125 | ℃ | 1 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
XL2596HVS-5.0E1 - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5L, generated on the KiCad land (body 8.7 x 10.16 mm, terminals on the pads, 4.57 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
xl2596hvs-5-0e1-etched.step/xl2596hvs-5-0e1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xl2596hvs-5-0e1.step/xl2596hvs-5-0e1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XLSEMI datasheet (17 pp, sha256
10bfc4dd705b0c69, retrieved 2026-11-17, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# XL2596HVS-5.0E1
> 3D generated from the datasheet; KiCad's model does not fit this maker's body.
**XLSEMI** · DC-DC Converters · TO-263-5L
XL2596HVS-5.0E1 from XLSEMI, in a TO-263-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power supply input pin. Supports DC 4.5V to 50V wide input operating range. Requires an electrolytic bypass capacitor between VIN and GND to suppress noise. |
| 2 | SW | passive | Power switch output pin. SW is the switching node of the internal power transistor that drives the external inductor. Absolute maximum voltage -0.3V to VIN. |
| 3 | GND | power_in | Ground pin. Also connected to the exposed metal tab of the TO263-5L package for thermal dissipation. |
| 4 | FB | input | Feedback pin. Senses the output voltage via an internal (fixed-output versions) or external (ADJ version) resistor divider network for regulation. Reference voltage is 1.23V on the ADJ version. Absolute maximum -0.3V to 20V. |
| 5 | EN | input | Enable pin, TTL-compatible. Low level enables operation, high level shuts down the converter; floating is treated as low (enabled). VEN_H >= 1.4V (shutdown), VEN_L <= 0.8V (enable). Absolute maximum -0.3V to 7V. Typical EN pin current 5uA at VEN=2.5V. |
| 6 | GND | power_in | Package tab (pad 6). printed: Metal Tab GND. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XLSEMI |
| Package | TO-263-5L |
| Category | PMIC |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (XL2596HVS-5.0) | VOUT | 4.925 | 5 | 5.075 | V | VIN=12V, IOUT=0.5A | 4 |
| Operating input voltage | VIN | 4.5 | | 50 | V | | 5 |
| Oscillator frequency | FOSC | 135 | 150 | 165 | KHz | | 5 |
| Shutdown current | IS | | 46 | 100 | uA | VEN=2V | 5 |
| Quiescent supply current | IQ | | 1.3 | 2 | mA | 注2:ADJ/3.3V/5.0V版本 VFB=10V | 5 |
| Switch current limit | IL | | 3.2 | | A | VFB=0V | 5 |
| EN pin threshold voltage, high (shutdown) | VEN_H | | 1.4 | | V | 高电平(关断) | 5 |
| EN pin threshold voltage, low (on) | VEN_L | | 0.8 | | V | 低电平(开启) | 5 |
| EN pin current | IEN | | 5 | | uA | VEN=2.5V | 5 |
| Saturation voltage | VCE | | 1.1 | 1.3 | V | VFB=0V, IOUT=2A | 5 |
| Maximum duty cycle | DMAX | | 100 | | % | VFB=0V | 5 |
| Thermal shutdown temperature | TSD | | 180 | | ℃ | | 5 |
| Thermal shutdown hysteresis | TD | | 40 | | ℃ | | 5 |
| Input voltage (absolute maximum) | VIN | -0.3 | | 60 | V | | 3 |
| Feedback pin voltage (absolute maximum) | VFB | -0.3 | | 20 | V | | 3 |
| Enable pin voltage (absolute maximum) | VEN | -0.3 | | 7 | V | | 3 |
| Switch output pin voltage (absolute maximum) | VSW | -0.3 | | | V | | 3 |
| ESD HBM rating | ESD (HBM) | 8000 | | | V | | 3 |
| Operating junction temperature | TJ | -40 | | 150 | oC | | 3 |
| Storage temperature range | TSTG | -65 | | 150 | oC | | 3 |
| Lead temperature (soldering) | TLEAD | | | 260 | oC | 焊接10秒 | 3 |
| Thermal resistance, junction to ambient (TO263-5L) | RJA | | 30 | | oC /W | 结到环境,无外部散热片 | 3 |
| Recommended operating input voltage | | 4.5 | | 50 | V | | 1 |
| Ambient operating temperature range (grade 1) | | -40 | | 125 | ℃ | | 1 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `XL2596HVS-5.0E1`
- Footprint: `Package_TO_SOT_SMD:TO-263-5_TabPin6`
- 3D model: TO-263-5L, generated on the KiCad land (body 8.7 x 10.16 mm, terminals on the pads, 4.57 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `xl2596hvs-5-0e1-etched.step` / `xl2596hvs-5-0e1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xl2596hvs-5-0e1.step` / `xl2596hvs-5-0e1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [XLSEMI datasheet](docs/xl2596hvs-5-0e1-datasheet.pdf) (17 pp, sha256 `10bfc4dd705b0c69`, retrieved 2026-11-17, tier: manufacturer)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/xl2596hvs-5-0e1-datasheet.pdf)