Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

XL2596HVS-5.0E1

3D generated from the datasheet; KiCad's model does not fit this maker's body.

XLSEMI · DC-DC Converters · TO-263-5L

XL2596HVS-5.0E1 from XLSEMI, in a TO-263-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VIN power_in Power supply input pin. Supports DC 4.5V to 50V wide input operating range. Requires an electrolytic bypass capacitor between VIN and GND to suppress noise.
2 SW passive Power switch output pin. SW is the switching node of the internal power transistor that drives the external inductor. Absolute maximum voltage -0.3V to VIN.
3 GND power_in Ground pin. Also connected to the exposed metal tab of the TO263-5L package for thermal dissipation.
4 FB input Feedback pin. Senses the output voltage via an internal (fixed-output versions) or external (ADJ version) resistor divider network for regulation. Reference voltage is 1.23V on the ADJ version. Absolute maximum -0.3V to 20V.
5 EN input Enable pin, TTL-compatible. Low level enables operation, high level shuts down the converter; floating is treated as low (enabled). VEN_H >= 1.4V (shutdown), VEN_L <= 0.8V (enable). Absolute maximum -0.3V to 7V. Typical EN pin current 5uA at VEN=2.5V.
6 GND power_in Package tab (pad 6). printed: Metal Tab GND.

Key specifications

Parameter Value
Manufacturer XLSEMI
Package TO-263-5L
Category PMIC
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage (XL2596HVS-5.0) VOUT 4.925 5 5.075 V VIN=12V, IOUT=0.5A 4
Operating input voltage VIN 4.5 50 V 5
Oscillator frequency FOSC 135 150 165 KHz 5
Shutdown current IS 46 100 uA VEN=2V 5
Quiescent supply current IQ 1.3 2 mA 注2:ADJ/3.3V/5.0V版本 VFB=10V 5
Switch current limit IL 3.2 A VFB=0V 5
EN pin threshold voltage, high (shutdown) VEN_H 1.4 V 高电平(关断) 5
EN pin threshold voltage, low (on) VEN_L 0.8 V 低电平(开启) 5
EN pin current IEN 5 uA VEN=2.5V 5
Saturation voltage VCE 1.1 1.3 V VFB=0V, IOUT=2A 5
Maximum duty cycle DMAX 100 % VFB=0V 5
Thermal shutdown temperature TSD 180 ℃ 5
Thermal shutdown hysteresis TD 40 ℃ 5
Input voltage (absolute maximum) VIN -0.3 60 V 3
Feedback pin voltage (absolute maximum) VFB -0.3 20 V 3
Enable pin voltage (absolute maximum) VEN -0.3 7 V 3
Switch output pin voltage (absolute maximum) VSW -0.3 V 3
ESD HBM rating ESD (HBM) 8000 V 3
Operating junction temperature TJ -40 150 oC 3
Storage temperature range TSTG -65 150 oC 3
Lead temperature (soldering) TLEAD 260 oC 焊接10秒 3
Thermal resistance, junction to ambient (TO263-5L) RJA 30 oC /W 结到环境,无外部散热片 3
Recommended operating input voltage 4.5 50 V 1
Ambient operating temperature range (grade 1) -40 125 ℃ 1

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: XL2596HVS-5.0E1
  • Footprint: Package_TO_SOT_SMD:TO-263-5_TabPin6
  • 3D model: TO-263-5L, generated on the KiCad land (body 8.7 x 10.16 mm, terminals on the pads, 4.57 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: xl2596hvs-5-0e1-etched.step / xl2596hvs-5-0e1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xl2596hvs-5-0e1.step / xl2596hvs-5-0e1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: XLSEMI datasheet (17 pp, sha256 10bfc4dd705b0c69, retrieved 2026-11-17, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF