component
XL2596HVP-3.3E1
Public Made by Adomby adom
XLSEMI DC-DC Converters, SOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXL2596HVP-3.3E1
XLSEMI · DC-DC Converters · SOP-8-EP
XL2596HVP-3.3E1 from XLSEMI, in a SOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input pin supporting a wide DC 4.5V~50V operating range; an electrolytic capacitor must be connected between VIN and GND to remove noise. |
| 2 | SW | output | Power switch output pin, which is the switching node of the output power stage. |
| 3 | FB | input | Feedback pin that senses the output voltage for regulation (via an external resistor divider on the ADJ version, whose reference voltage is 1.23V); the 3.3V fixed version has the divider built in. |
| 4 | EN | input | Enable pin, active low: low level operates, high level shuts down (high threshold 1.4V, low threshold 0.8V), and it reads as low when left floating. |
| 5 | GND | power_in | Ground pin (pins 5~8 are GND). |
| 6 | GND | power_in | Ground pin (pins 5~8 are GND). |
| 7 | GND | power_in | Ground pin (pins 5~8 are GND). |
| 8 | GND | power_in | Ground pin (pins 5~8 are GND). |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XLSEMI |
| Package | SOP-8-EP |
| Category | Power Management (PMIC) |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (3.3V version) | VOUT | 3.25 | 3.3 | 3.35 | V | TA=25°C, VIN=12V, IOUT=0.5A | 4 |
| Efficiency (3.3V version) | η | 77.3 | % | VIN=12V, VOUT=3.3V, IOUT=1.5A | 4 | ||
| Operating voltage | VIN | 4.5 | 50 | V | TA=25°C, VEN=0V | 5 | |
| Shutdown current | IS | 46 | 100 | uA | VEN=2V | 5 | |
| Quiescent current | IQ | 1.3 | 2 | mA | Note 2: VFB=10V for 3.3V version | 5 | |
| Oscillation frequency | FOSC | 135 | 150 | 165 | KHz | 5 | |
| Switch current limit | IL | 3 | A | VFB=0V | 5 | ||
| EN threshold high (shutdown) | VEN_H | 1.4 | V | 5 | |||
| EN threshold low (on) | VEN_L | 0.8 | V | 5 | |||
| EN pin current | IEN | 5 | uA | VEN=2.0V | 5 | ||
| Saturation voltage drop | VCE | 1.1 | 1.3 | V | VFB=0V, IOUT=2A | 5 | |
| Maximum duty cycle | DMAX | 100 | % | VFB=0V | 5 | ||
| Thermal shutdown temperature | TSD | 180 | °C | 5 | |||
| Thermal shutdown hysteresis | TD | 50 | °C | 5 | |||
| Input voltage | VIN | -0.3 | 60 | V | 3 | ||
| Feedback pin voltage | VFB | -0.3 | 20 | V | 3 | ||
| Enable pin voltage | VEN | -0.3 | 7 | V | 3 | ||
| Output switch pin voltage | VSW | -0.3 | V | max printed as VIN | 3 | ||
| Operating junction temperature | TJ | -40 | 150 | °C | 3 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 3 | ||
| Lead temperature | TLEAD | 260 | °C | soldering 10 seconds | 3 | ||
| ESD (HBM) | ESD | 8000 | V | printed as >8000 | 3 | ||
| Thermal resistance junction to ambient (SOP8-EP) | RJA | 60 | °C/W | no external heat sink | 3 |
CAD (KiCad official)
- Symbol:
XL2596HVP-3.3E1 - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: SOP-8-EP (KiCad packages3D, STEP)
- 3D model files:
xl2596hvp-3-3e1-etched.step/xl2596hvp-3-3e1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xl2596hvp-3-3e1.step/xl2596hvp-3-3e1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XLSEMI datasheet (17 pp, sha256
5a6d81fc8b895f6d, retrieved 2026-10-23, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).