main
History Download
Ray Publish 0.4.0 36dde65

XL2576S-12E1

3D generated from the datasheet; KiCad's model does not fit this maker's body.

XLSEMI · DC-DC Converters · TO-263-5

XL2576S-12E1 from XLSEMI, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VIN power_in Supply voltage input pin. Operates from 4.5V to 40V DC. Bypass VIN to GND with a suitably large capacitor (e.g. 470uF/35V CIN + 1uF ceramic) to eliminate noise on the input.
2 SW passive Power switch output pin. Switch node connected to the emitter of the internal NPN power transistor; drives the external inductor and Schottky catch diode. VSW absolute max is -0.3V to VIN.
3 GND power_in Ground pin. Care must be taken in layout: this pin should be placed outside of the Schottky diode-to-output-capacitor ground return path to prevent switching current spikes from inducing voltage noise into the device. The exposed metal tab is also GND.
4 FB input Feedback pin. Senses the output voltage via an external resistor divider and regulates it against the internal 1.23V reference. On the fixed 12V version (XL2576-12) the internal divider is set with R1=2.5k and R2=21.8k. FB absolute max is -0.3V to VIN.
5 EN input Enable pin, TTL-compatible with hysteresis. Drive EN low to turn on the device; drive it high to turn it off (shutdown). Floating defaults to low (device enabled). EN absolute max is -0.3V to VIN.
6 GND power_in Package tab (pad 6). printed: Metal Tab GND.

Key specifications

Parameter Value
Manufacturer XLSEMI
Package TO-263-5
Category PMIC
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage VOUT 11.52 12 12.48 V Vin = 15V to 40V, Iload=0.2A to 2A 6
Input operation voltage Vin 4.5 40 V 7
Shutdown Supply Current IS 80 200 uA VEN=5V 7
Quiescent Supply Current Iq 2 10 mA VEN =0V, VFB =Vin 7
Oscillator Frequency Fosc 40 52 64 Khz 7
Switch Current Limit IL 3.6 4.8 6.9 A VFB =0V 7
EN Pin Input Leakage Current (high, OFF) IH 5 15 uA VEN =2.5V (OFF) 7
EN Pin Input Leakage Current (low, ON) IL 0.2 5 uA VEN =0.5V (ON) 7
Output Saturation Voltage VCE 1.3 1.5 V VFB=0V, Iout=3A 7
Max. Duty Cycle DMAX 100 % VFB=0V 7
Input Voltage Vin -0.3 45 V 5
Feedback Pin Voltage VFB -0.3 V Printed as -0.3 to Vin 5
EN Pin Voltage VEN -0.3 V Printed as -0.3 to Vin 5
Output Switch Pin Voltage VSW -0.3 V Printed as -0.3 to Vin 5
Thermal Resistance (Junction to Ambient) RJA 30 oC /W TO220-5L & TO263-5L, No Heatsink, Free Air 5
Operating Junction Temperature TJ -40 125 oC 5
Storage Temperature TSTG -65 150 oC 5
Lead Temperature TLEAD 260 oC Soldering, 10 sec 5
ESD (HBM) 2000 V HBM; printed as >2000 5

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: XL2576S-12E1
  • Footprint: Package_TO_SOT_SMD:TO-263-5_TabPin6
  • 3D model: TO-263-5, generated on the KiCad land (body 8.7 x 10.16 mm, terminals on the pads, 4.57 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: xl2576s-12e1-etched.step / xl2576s-12e1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xl2576s-12e1.step / xl2576s-12e1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: XLSEMI datasheet (15 pp, sha256 c3857bfcd9cf7c08, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF