3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownXL2576S-12E1
3D generated from the datasheet; KiCad's model does not fit this maker's body.
XLSEMI · DC-DC Converters · TO-263-5
XL2576S-12E1 from XLSEMI, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply voltage input pin. Operates from 4.5V to 40V DC. Bypass VIN to GND with a suitably large capacitor (e.g. 470uF/35V CIN + 1uF ceramic) to eliminate noise on the input. |
| 2 | SW | passive | Power switch output pin. Switch node connected to the emitter of the internal NPN power transistor; drives the external inductor and Schottky catch diode. VSW absolute max is -0.3V to VIN. |
| 3 | GND | power_in | Ground pin. Care must be taken in layout: this pin should be placed outside of the Schottky diode-to-output-capacitor ground return path to prevent switching current spikes from inducing voltage noise into the device. The exposed metal tab is also GND. |
| 4 | FB | input | Feedback pin. Senses the output voltage via an external resistor divider and regulates it against the internal 1.23V reference. On the fixed 12V version (XL2576-12) the internal divider is set with R1=2.5k and R2=21.8k. FB absolute max is -0.3V to VIN. |
| 5 | EN | input | Enable pin, TTL-compatible with hysteresis. Drive EN low to turn on the device; drive it high to turn it off (shutdown). Floating defaults to low (device enabled). EN absolute max is -0.3V to VIN. |
| 6 | GND | power_in | Package tab (pad 6). printed: Metal Tab GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XLSEMI |
| Package | TO-263-5 |
| Category | PMIC |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | 11.52 | 12 | 12.48 | V | Vin = 15V to 40V, Iload=0.2A to 2A | 6 |
| Input operation voltage | Vin | 4.5 | 40 | V | 7 | ||
| Shutdown Supply Current | IS | 80 | 200 | uA | VEN=5V | 7 | |
| Quiescent Supply Current | Iq | 2 | 10 | mA | VEN =0V, VFB =Vin | 7 | |
| Oscillator Frequency | Fosc | 40 | 52 | 64 | Khz | 7 | |
| Switch Current Limit | IL | 3.6 | 4.8 | 6.9 | A | VFB =0V | 7 |
| EN Pin Input Leakage Current (high, OFF) | IH | 5 | 15 | uA | VEN =2.5V (OFF) | 7 | |
| EN Pin Input Leakage Current (low, ON) | IL | 0.2 | 5 | uA | VEN =0.5V (ON) | 7 | |
| Output Saturation Voltage | VCE | 1.3 | 1.5 | V | VFB=0V, Iout=3A | 7 | |
| Max. Duty Cycle | DMAX | 100 | % | VFB=0V | 7 | ||
| Input Voltage | Vin | -0.3 | 45 | V | 5 | ||
| Feedback Pin Voltage | VFB | -0.3 | V | Printed as -0.3 to Vin | 5 | ||
| EN Pin Voltage | VEN | -0.3 | V | Printed as -0.3 to Vin | 5 | ||
| Output Switch Pin Voltage | VSW | -0.3 | V | Printed as -0.3 to Vin | 5 | ||
| Thermal Resistance (Junction to Ambient) | RJA | 30 | oC /W | TO220-5L & TO263-5L, No Heatsink, Free Air | 5 | ||
| Operating Junction Temperature | TJ | -40 | 125 | oC | 5 | ||
| Storage Temperature | TSTG | -65 | 150 | oC | 5 | ||
| Lead Temperature | TLEAD | 260 | oC | Soldering, 10 sec | 5 | ||
| ESD (HBM) | 2000 | V | HBM; printed as >2000 | 5 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
XL2576S-12E1 - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5, generated on the KiCad land (body 8.7 x 10.16 mm, terminals on the pads, 4.57 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
xl2576s-12e1-etched.step/xl2576s-12e1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xl2576s-12e1.step/xl2576s-12e1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XLSEMI datasheet (15 pp, sha256
c3857bfcd9cf7c08, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).