main
Ray Publish 0.1.0 2fc7e9f
{
  "slug": "xl232k",
  "version": "0.1.0",
  "type": "component",
  "description": "XINLUDA RS232 ICs, SOP-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface ics",
    "xl232k",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "xl232k.kicad_sym",
    "xl232k.kicad_mod",
    "xl232k.glb",
    "xl232k.step",
    "xl232k.lbr",
    "docs/hero.png",
    "docs/xl232k-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "xl232k-hero.glb",
    "xl232k-hero.overlay.json"
  ],
  "component": {
    "mpn": "XL232K",
    "manufacturer": "XINLUDA",
    "package": "SOP-16-300mil",
    "pin_count": 16,
    "category": "Interface ICs",
    "subcategory": "RS232 ICs",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/9362673d304bad5139ca822f00aa2d3c.pdf",
    "parts": {
      "symbol": "xl232k.kicad_sym",
      "footprint": "xl232k.kicad_mod",
      "model_3d": "xl232k-hero.glb",
      "model_3d_plain": "xl232k.glb",
      "model_3d_step": "xl232k-etched.step",
      "model_3d_step_plain": "xl232k.step",
      "lbr": "xl232k.lbr"
    },
    "distributor_links": {
      "lcsc": "C561297"
    },
    "distributor_check": {
      "checked_at": "2026-11-13T04:43:58Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "C1+",
        "type": "passive",
        "description": "Positive lead of the C1 charge-pump capacitor (1µF/16V in the typical circuit)."
      },
      {
        "number": "2",
        "name": "V+",
        "type": "power_out",
        "description": "Positive charge pump output (about +10V unloaded) for the storage capacitor only, unregulated and with output dropping as load current rises."
      },
      {
        "number": "3",
        "name": "C1-",
        "type": "passive",
        "description": "Negative lead of the C1 charge-pump capacitor."
      },
      {
        "number": "4",
        "name": "C2+",
        "type": "passive",
        "description": "Positive lead of the C2 charge-pump capacitor."
      },
      {
        "number": "5",
        "name": "C2-",
        "type": "passive",
        "description": "Negative lead of the C2 charge-pump capacitor."
      },
      {
        "number": "6",
        "name": "V-",
        "type": "power_out",
        "description": "Negative charge pump output (about -10V unloaded) for the storage capacitor only, unregulated and with output dropping as load current rises."
      },
      {
        "number": "7",
        "name": "T2OUT",
        "type": "output",
        "description": "RS-232 line data output of driver 2 to the remote RS-232 system, swing at least ±5V into 3kΩ and withstands ±15V."
      },
      {
        "number": "8",
        "name": "R2IN",
        "type": "input",
        "description": "RS-232 line data input of receiver 2 from the remote RS-232 system, with 5kΩ nominal input resistance and ±30V operating range."
      },
      {
        "number": "9",
        "name": "R2OUT",
        "type": "output",
        "description": "Logic data output of receiver 2 to the UART, TTL/CMOS compatible."
      },
      {
        "number": "10",
        "name": "T2IN",
        "type": "input",
        "description": "Logic data input of driver 2 from the UART, TTL/CMOS compatible with a built-in 400k pull-up to VCC."
      },
      {
        "number": "11",
        "name": "T1IN",
        "type": "input",
        "description": "Logic data input of driver 1 from the UART, TTL/CMOS compatible with a built-in 400k pull-up to VCC."
      },
      {
        "number": "12",
        "name": "R1OUT",
        "type": "output",
        "description": "Logic data output of receiver 1 to the UART, TTL/CMOS compatible."
      },
      {
        "number": "13",
        "name": "R1IN",
        "type": "input",
        "description": "RS-232 line data input of receiver 1 from the remote RS-232 system, with 5kΩ nominal input resistance and ±30V operating range."
      },
      {
        "number": "14",
        "name": "T1OUT",
        "type": "output",
        "description": "RS-232 line data output of driver 1 to the remote RS-232 system, swing at least ±5V into 3kΩ and withstands ±15V."
      },
      {
        "number": "15",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "16",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage, connect to an external +5V supply (absolute maximum -0.3V to +6V)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The XL232K is listed as SOP16(W) with a 10.45 x 7.5 mm body (page 8), which is the wide 300 mil pack; The pin table names pins 2 and 6 VS+ and VS-, but the pin configuration figure labels them V+ and V-; The pin table groups the duplicate-function pins in pairs (T2OUT/T1OUT 7,14; R2IN/R1IN 8,13; R2OUT/R"
        ],
        "pages_sent": 11,
        "cost_usd": 0.068,
        "at": "2026-11-13T04:43:46"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/9362673d304bad5139ca822f00aa2d3c.pdf",
        "pages": 11,
        "sha256": "3bd61626045185e9",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "xl232k.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.31,
          12.8,
          2.54
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "da632621486d655929fd0dc27c17af22838f52a08d3e7e93d3848a01d9b04637",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "xl232k-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.31,
          12.8,
          2.54
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e584b2dd215a4601602ab21adb3c69b01949e0ba8e9e7d0e367ea28ff544eb43",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}