Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

XL232K

XINLUDA · RS232 ICs · SOP-16-300mil

XL232K from XINLUDA, in a SOP-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C1+ passive Positive lead of the C1 charge-pump capacitor (1µF/16V in the typical circuit).
2 V+ power_out Positive charge pump output (about +10V unloaded) for the storage capacitor only, unregulated and with output dropping as load current rises.
3 C1- passive Negative lead of the C1 charge-pump capacitor.
4 C2+ passive Positive lead of the C2 charge-pump capacitor.
5 C2- passive Negative lead of the C2 charge-pump capacitor.
6 V- power_out Negative charge pump output (about -10V unloaded) for the storage capacitor only, unregulated and with output dropping as load current rises.
7 T2OUT output RS-232 line data output of driver 2 to the remote RS-232 system, swing at least ±5V into 3kΩ and withstands ±15V.
8 R2IN input RS-232 line data input of receiver 2 from the remote RS-232 system, with 5kΩ nominal input resistance and ±30V operating range.
9 R2OUT output Logic data output of receiver 2 to the UART, TTL/CMOS compatible.
10 T2IN input Logic data input of driver 2 from the UART, TTL/CMOS compatible with a built-in 400k pull-up to VCC.
11 T1IN input Logic data input of driver 1 from the UART, TTL/CMOS compatible with a built-in 400k pull-up to VCC.
12 R1OUT output Logic data output of receiver 1 to the UART, TTL/CMOS compatible.
13 R1IN input RS-232 line data input of receiver 1 from the remote RS-232 system, with 5kΩ nominal input resistance and ±30V operating range.
14 T1OUT output RS-232 line data output of driver 1 to the remote RS-232 system, swing at least ±5V into 3kΩ and withstands ±15V.
15 GND power_in Ground.
16 VCC power_in Supply voltage, connect to an external +5V supply (absolute maximum -0.3V to +6V).

Key specifications

Parameter Value
Manufacturer XINLUDA
Package SOP-16-300mil
Category Interface ICs
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC Supply voltage range VCC -0.3 6 V 4
V+ charge pump output (Note 1) V+ 14 V Note 1; min printed as VCC - 0.3 4
V- charge pump output (Note 1) V- -14 0.3 V Note 1 4
Input voltage, RIN VIN -30 30 V RIN input 4
Input voltage, TIN VIN -0.3 V TIN input; max printed as VCC + 0.3 4
Continuous power dissipation, SOP16(W) P 720 mW TA = +70°C, SOP16(W); derate 9.52mW/°C above +70°C 4
Operating temperature range Totr -40 85 ℃ 4
Storage temperature range Tstg -45 125 ℃ 4
Lead temperature, soldering TLT 300 ℃ Soldering, 10s 4
Soldering temperature, reflow TST 225 ℃ Reflow 4
Soldering temperature, all other lead(Pb)-free packages Tf 260 ℃ All other lead(Pb)-free packages 4
Soldering temperature, all other packages containing lead(Pb) Tc 240 ℃ All other packages containing lead(Pb) 4
Supply voltage tolerance VCC -5 5 % VCC nominal +5V 5
Output voltage swing -5 7.3 V All transmitter outputs loaded with 3kΩ to ground; printed ±5.0 (MIN) and ±7.3 (TYP) 5
VCC supply current 8 16 mA No load, TA = +25°C 5
Logic pullup current 1.5 200 µA VTIN = 0V 5
Receiver input voltage operating range -30 30 V 5
RS-232 input hysteresis 0.2 0.5 1 V VCC = +5V, no hysteresis in shutdown 5
RS-232 input resistance 3 5 7 kΩ TA = +25°C, VCC = +5V 5
TTL/CMOS output voltage low 0.4 V IOUT = 1.6mA (IOUT = 3.2mA) 5
TTL/CMOS output voltage high 3.5 V IOUT = -1mA; max printed as VCC - 0.4 5
Propagation delay, RS-232 IN to TTL/CMOS OUT, high-to-low (tPHLS) tPHLS 4 40 µs RS-232 IN to TTL/CMOS OUT, CL = 150pF 5
Propagation delay, RS-232 IN to TTL/CMOS OUT, low-to-high (tPLHS) tPLHS 6 40 µs RS-232 IN to TTL/CMOS OUT, CL = 150pF 5
Transition region slew rate 4 30 V/µs TA = +25°C, VCC = +5V, RL = 3kΩ to 7kΩ, CL = 50pF to 2500pF, measured from +3V to -3V or -3V to +3V 5
Transmitter output resistance 300 Ω VCC = V+ = V- = 0V, VOUT = ±2V 5
Transmitter output short-circuit current -10 10 mA Printed ±10 mA 5

CAD (KiCad official)

  • Symbol: XL232K
  • Footprint: Package_SO:SOIC-16W_7.5x12.8mm_P1.27mm
  • 3D model: SOP-16-300mil (KiCad packages3D, STEP)
  • 3D model files: xl232k-etched.step / xl232k-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xl232k.step / xl232k.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: XINLUDA datasheet (11 pp, sha256 3bd61626045185e9, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF