main
Ray
Publish 0.1.0
2fc7e9f
XL232K
XINLUDA · RS232 ICs · SOP-16-300mil
XL232K from XINLUDA, in a SOP-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive lead of the C1 charge-pump capacitor (1µF/16V in the typical circuit). |
| 2 | V+ | power_out | Positive charge pump output (about +10V unloaded) for the storage capacitor only, unregulated and with output dropping as load current rises. |
| 3 | C1- | passive | Negative lead of the C1 charge-pump capacitor. |
| 4 | C2+ | passive | Positive lead of the C2 charge-pump capacitor. |
| 5 | C2- | passive | Negative lead of the C2 charge-pump capacitor. |
| 6 | V- | power_out | Negative charge pump output (about -10V unloaded) for the storage capacitor only, unregulated and with output dropping as load current rises. |
| 7 | T2OUT | output | RS-232 line data output of driver 2 to the remote RS-232 system, swing at least ±5V into 3kΩ and withstands ±15V. |
| 8 | R2IN | input | RS-232 line data input of receiver 2 from the remote RS-232 system, with 5kΩ nominal input resistance and ±30V operating range. |
| 9 | R2OUT | output | Logic data output of receiver 2 to the UART, TTL/CMOS compatible. |
| 10 | T2IN | input | Logic data input of driver 2 from the UART, TTL/CMOS compatible with a built-in 400k pull-up to VCC. |
| 11 | T1IN | input | Logic data input of driver 1 from the UART, TTL/CMOS compatible with a built-in 400k pull-up to VCC. |
| 12 | R1OUT | output | Logic data output of receiver 1 to the UART, TTL/CMOS compatible. |
| 13 | R1IN | input | RS-232 line data input of receiver 1 from the remote RS-232 system, with 5kΩ nominal input resistance and ±30V operating range. |
| 14 | T1OUT | output | RS-232 line data output of driver 1 to the remote RS-232 system, swing at least ±5V into 3kΩ and withstands ±15V. |
| 15 | GND | power_in | Ground. |
| 16 | VCC | power_in | Supply voltage, connect to an external +5V supply (absolute maximum -0.3V to +6V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XINLUDA |
| Package | SOP-16-300mil |
| Category | Interface ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC Supply voltage range | VCC | -0.3 | 6 | V | 4 | ||
| V+ charge pump output (Note 1) | V+ | 14 | V | Note 1; min printed as VCC - 0.3 | 4 | ||
| V- charge pump output (Note 1) | V- | -14 | 0.3 | V | Note 1 | 4 | |
| Input voltage, RIN | VIN | -30 | 30 | V | RIN input | 4 | |
| Input voltage, TIN | VIN | -0.3 | V | TIN input; max printed as VCC + 0.3 | 4 | ||
| Continuous power dissipation, SOP16(W) | P | 720 | mW | TA = +70°C, SOP16(W); derate 9.52mW/°C above +70°C | 4 | ||
| Operating temperature range | Totr | -40 | 85 | ℃ | 4 | ||
| Storage temperature range | Tstg | -45 | 125 | ℃ | 4 | ||
| Lead temperature, soldering | TLT | 300 | ℃ | Soldering, 10s | 4 | ||
| Soldering temperature, reflow | TST | 225 | ℃ | Reflow | 4 | ||
| Soldering temperature, all other lead(Pb)-free packages | Tf | 260 | ℃ | All other lead(Pb)-free packages | 4 | ||
| Soldering temperature, all other packages containing lead(Pb) | Tc | 240 | ℃ | All other packages containing lead(Pb) | 4 | ||
| Supply voltage tolerance | VCC | -5 | 5 | % | VCC nominal +5V | 5 | |
| Output voltage swing | -5 | 7.3 | V | All transmitter outputs loaded with 3kΩ to ground; printed ±5.0 (MIN) and ±7.3 (TYP) | 5 | ||
| VCC supply current | 8 | 16 | mA | No load, TA = +25°C | 5 | ||
| Logic pullup current | 1.5 | 200 | µA | VTIN = 0V | 5 | ||
| Receiver input voltage operating range | -30 | 30 | V | 5 | |||
| RS-232 input hysteresis | 0.2 | 0.5 | 1 | V | VCC = +5V, no hysteresis in shutdown | 5 | |
| RS-232 input resistance | 3 | 5 | 7 | kΩ | TA = +25°C, VCC = +5V | 5 | |
| TTL/CMOS output voltage low | 0.4 | V | IOUT = 1.6mA (IOUT = 3.2mA) | 5 | |||
| TTL/CMOS output voltage high | 3.5 | V | IOUT = -1mA; max printed as VCC - 0.4 | 5 | |||
| Propagation delay, RS-232 IN to TTL/CMOS OUT, high-to-low (tPHLS) | tPHLS | 4 | 40 | µs | RS-232 IN to TTL/CMOS OUT, CL = 150pF | 5 | |
| Propagation delay, RS-232 IN to TTL/CMOS OUT, low-to-high (tPLHS) | tPLHS | 6 | 40 | µs | RS-232 IN to TTL/CMOS OUT, CL = 150pF | 5 | |
| Transition region slew rate | 4 | 30 | V/µs | TA = +25°C, VCC = +5V, RL = 3kΩ to 7kΩ, CL = 50pF to 2500pF, measured from +3V to -3V or -3V to +3V | 5 | ||
| Transmitter output resistance | 300 | Ω | VCC = V+ = V- = 0V, VOUT = ±2V | 5 | |||
| Transmitter output short-circuit current | -10 | 10 | mA | Printed ±10 mA | 5 |
CAD (KiCad official)
- Symbol:
XL232K - Footprint:
Package_SO:SOIC-16W_7.5x12.8mm_P1.27mm - 3D model: SOP-16-300mil (KiCad packages3D, STEP)
- 3D model files:
xl232k-etched.step/xl232k-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xl232k.step/xl232k.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XINLUDA datasheet (11 pp, sha256
3bd61626045185e9, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# XL232K
**XINLUDA** · RS232 ICs · SOP-16-300mil
XL232K from XINLUDA, in a SOP-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive lead of the C1 charge-pump capacitor (1µF/16V in the typical circuit). |
| 2 | V+ | power_out | Positive charge pump output (about +10V unloaded) for the storage capacitor only, unregulated and with output dropping as load current rises. |
| 3 | C1- | passive | Negative lead of the C1 charge-pump capacitor. |
| 4 | C2+ | passive | Positive lead of the C2 charge-pump capacitor. |
| 5 | C2- | passive | Negative lead of the C2 charge-pump capacitor. |
| 6 | V- | power_out | Negative charge pump output (about -10V unloaded) for the storage capacitor only, unregulated and with output dropping as load current rises. |
| 7 | T2OUT | output | RS-232 line data output of driver 2 to the remote RS-232 system, swing at least ±5V into 3kΩ and withstands ±15V. |
| 8 | R2IN | input | RS-232 line data input of receiver 2 from the remote RS-232 system, with 5kΩ nominal input resistance and ±30V operating range. |
| 9 | R2OUT | output | Logic data output of receiver 2 to the UART, TTL/CMOS compatible. |
| 10 | T2IN | input | Logic data input of driver 2 from the UART, TTL/CMOS compatible with a built-in 400k pull-up to VCC. |
| 11 | T1IN | input | Logic data input of driver 1 from the UART, TTL/CMOS compatible with a built-in 400k pull-up to VCC. |
| 12 | R1OUT | output | Logic data output of receiver 1 to the UART, TTL/CMOS compatible. |
| 13 | R1IN | input | RS-232 line data input of receiver 1 from the remote RS-232 system, with 5kΩ nominal input resistance and ±30V operating range. |
| 14 | T1OUT | output | RS-232 line data output of driver 1 to the remote RS-232 system, swing at least ±5V into 3kΩ and withstands ±15V. |
| 15 | GND | power_in | Ground. |
| 16 | VCC | power_in | Supply voltage, connect to an external +5V supply (absolute maximum -0.3V to +6V). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XINLUDA |
| Package | SOP-16-300mil |
| Category | Interface ICs |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC Supply voltage range | VCC | -0.3 | | 6 | V | | 4 |
| V+ charge pump output (Note 1) | V+ | | | 14 | V | Note 1; min printed as VCC - 0.3 | 4 |
| V- charge pump output (Note 1) | V- | -14 | | 0.3 | V | Note 1 | 4 |
| Input voltage, RIN | VIN | -30 | | 30 | V | RIN input | 4 |
| Input voltage, TIN | VIN | -0.3 | | | V | TIN input; max printed as VCC + 0.3 | 4 |
| Continuous power dissipation, SOP16(W) | P | | | 720 | mW | TA = +70°C, SOP16(W); derate 9.52mW/°C above +70°C | 4 |
| Operating temperature range | Totr | -40 | | 85 | ℃ | | 4 |
| Storage temperature range | Tstg | -45 | | 125 | ℃ | | 4 |
| Lead temperature, soldering | TLT | | | 300 | ℃ | Soldering, 10s | 4 |
| Soldering temperature, reflow | TST | | | 225 | ℃ | Reflow | 4 |
| Soldering temperature, all other lead(Pb)-free packages | Tf | | | 260 | ℃ | All other lead(Pb)-free packages | 4 |
| Soldering temperature, all other packages containing lead(Pb) | Tc | | | 240 | ℃ | All other packages containing lead(Pb) | 4 |
| Supply voltage tolerance | VCC | -5 | | 5 | % | VCC nominal +5V | 5 |
| Output voltage swing | | -5 | 7.3 | | V | All transmitter outputs loaded with 3kΩ to ground; printed ±5.0 (MIN) and ±7.3 (TYP) | 5 |
| VCC supply current | | | 8 | 16 | mA | No load, TA = +25°C | 5 |
| Logic pullup current | | 1.5 | | 200 | µA | VTIN = 0V | 5 |
| Receiver input voltage operating range | | -30 | | 30 | V | | 5 |
| RS-232 input hysteresis | | 0.2 | 0.5 | 1 | V | VCC = +5V, no hysteresis in shutdown | 5 |
| RS-232 input resistance | | 3 | 5 | 7 | kΩ | TA = +25°C, VCC = +5V | 5 |
| TTL/CMOS output voltage low | | | | 0.4 | V | IOUT = 1.6mA (IOUT = 3.2mA) | 5 |
| TTL/CMOS output voltage high | | 3.5 | | | V | IOUT = -1mA; max printed as VCC - 0.4 | 5 |
| Propagation delay, RS-232 IN to TTL/CMOS OUT, high-to-low (tPHLS) | tPHLS | 4 | | 40 | µs | RS-232 IN to TTL/CMOS OUT, CL = 150pF | 5 |
| Propagation delay, RS-232 IN to TTL/CMOS OUT, low-to-high (tPLHS) | tPLHS | 6 | | 40 | µs | RS-232 IN to TTL/CMOS OUT, CL = 150pF | 5 |
| Transition region slew rate | | 4 | | 30 | V/µs | TA = +25°C, VCC = +5V, RL = 3kΩ to 7kΩ, CL = 50pF to 2500pF, measured from +3V to -3V or -3V to +3V | 5 |
| Transmitter output resistance | | 300 | | | Ω | VCC = V+ = V- = 0V, VOUT = ±2V | 5 |
| Transmitter output short-circuit current | | -10 | | 10 | mA | Printed ±10 mA | 5 |
## CAD (KiCad official)
- Symbol: `XL232K`
- Footprint: `Package_SO:SOIC-16W_7.5x12.8mm_P1.27mm`
- 3D model: SOP-16-300mil (KiCad packages3D, STEP)
- 3D model files: `xl232k-etched.step` / `xl232k-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xl232k.step` / `xl232k.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [XINLUDA datasheet](docs/xl232k-datasheet.pdf) (11 pp, sha256 `3bd61626045185e9`, retrieved 2026-11-13, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/xl232k-datasheet.pdf)