main
Ray
Publish 0.1.1
e210238
XD7705B
XINLUDA · Analog To Digital Converters (ADC) · DIP-16
XD7705B from XINLUDA, in a DIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCLK | input | Serial clock input for reading and writing the on-chip registers, with Schmitt-trigger thresholds (VT+ 1.4 to 3 V and VT- 0.8 to 1.4 V at VDD=5 V; VT+ 1 to 2.5 V and VT- 0.4 to 1.1 V at VDD=3 V). |
| 2 | XI | input | Clock input for a crystal or external master clock, with a master clock range of 400 to 2500 kHz; input low/high levels are 0.8 V / 3.5 V at 5 V and 0.4 V / 2.5 V at 3 V. |
| 3 | XO | output | Clock output for the crystal oscillator (connects to the crystal circuit at XI). |
| 4 | CSN | input | Chip select, active low; registers can only be read or written while CSN is pulled low and CSN should be pulled high after the access. |
| 5 | RESET | input | Reset, active low; pulling it low resets all logic, digital filters and modulators and sets registers to default, with a minimum pulse width of 100 ns. |
| 6 | AIN2P | input | Differential analogue positive input for channel 2; absolute/common-mode range is -0.03 V to VDD+0.03 V with the buffer disabled (BUFEN=0) and 0.05 V to VDD-1.5 V with the buffer enabled (BUFEN=1). |
| 7 | AIN1P | input | Differential analogue positive input for channel 1; absolute/common-mode range is -0.03 V to VDD+0.03 V with the buffer disabled (BUFEN=0) and 0.05 V to VDD-1.5 V with the buffer enabled (BUFEN=1). |
| 8 | AIN1N | input | Differential analogue negative input for channel 1; absolute/common-mode range is -0.03 V to VDD+0.03 V with the buffer disabled (BUFEN=0) and 0.05 V to VDD-1.5 V with the buffer enabled (BUFEN=1). |
| 9 | REFINP | input | Positive input of the differential reference voltage; the datasheet requires REFINP to be greater than REFINN, with a reference of 1.225 V at 3 V supply or 2.5 V at 5 V supply, and references below 1 V raise output noise. |
| 10 | REFINN | input | Negative input of the differential reference voltage; the reference voltage range is 0 to VDD and REFINN must be less than REFINP. |
| 11 | AIN2N | input | Differential analogue negative input for channel 2; absolute/common-mode range is -0.03 V to VDD+0.03 V with the buffer disabled (BUFEN=0) and 0.05 V to VDD-1.5 V with the buffer enabled (BUFEN=1). |
| 12 | OKL | output | Conversion-complete flag output: low means the ADC result register has been updated and can be read, high means conversion or update is in progress and data must not be read. |
| 13 | DOUT | output | Serial data output, shifting the result MSB first with data updated on the falling edge of SCLK. |
| 14 | DIN | input | Serial data input, written on the rising edge of SCLK with a setup time of 30 ns and hold time of 20 ns. |
| 15 | VDD | power_in | Power supply, 3 V or 5 V operating voltage with ±5% range; absolute maximum is -0.3 V to 7 V. |
| 16 | GND | power_in | Ground pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XINLUDA |
| Package | DIP-16 |
| Category | Data Acquisition |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic Supply Voltage | VDD | -0.3 | 7 | V | TA=+25℃ unless otherwise stated | 3 | |
| Operating Temperature Range | Topr | -40 | 85 | ℃ | TA=+25℃ unless otherwise stated | 3 | |
| Storage temperature range | Tstg | -45 | 125 | ℃ | TA=+25℃ unless otherwise stated | 3 | |
| Junction temperature | Tj | 125 | ℃ | TA=+25℃ unless otherwise stated | 3 | ||
| Electrostatic discharge (ESD) Human-body model (HBM) | 2000 | V | Human-body model (HBM) | 3 | |||
| Analogue input voltage | Vin | -0.3 | V | TA=+25℃ unless otherwise stated; printed max is VDD+0.3 | 3 | ||
| Digital output voltage | Vout | -0.3 | V | TA=+25℃ unless otherwise stated; printed max is VDD+0.3 | 3 | ||
| Integral nonlinearity | 0 | 0.01 | %of FSR | Unless otherwise stated, VDD=+5V, REF=2.5V; TA=25℃ | 3 | ||
| Bipolar negative full scale error | 0 | 0.01 | %of FSR/℃ | Unless otherwise stated, VDD=+5V, REF=2.5V; TA=25℃ | 3 | ||
| REF IN Absolute/Common Mode Voltage | 0 | V | Unless otherwise stated, VDD=+5V, REF=2.5V; TA=25℃; printed max is VDD | 3 | |||
| AIN Absolute/Common Mode Voltage | -0.03 | V | BUFEN=0; printed max is VDD+0.03 | 3 | |||
| AIN Absolute/Common Mode Voltage | 0.05 | V | BUFEN=1; printed max is VDD-1.5 | 3 | |||
| AIN Differential voltage Unipolar input | 0 | V | Unipolar input; printed max is VREP/GAIN | 3 | |||
| REFINP-REFINN Difference | 1 | 1.75 | V | VDD=3V, Vref=1.225V | 3 | ||
| REFINP-REFINN Difference | 1 | 3.5 | V | VDD=5V, Vref=2.5V | 3 | ||
| VIL input low level | VIL | 0.8 | V | VDD=5V | 4 | ||
| VIL input low level | VIL | 0.4 | V | VDD=3V | 4 | ||
| VIH input high level | VIH | 2 | V | 4 | |||
| Schmitt trigger input (SCLK) positive threshold | VT+ | 1.4 | 3 | V | VDD=5V | 4 | |
| Schmitt trigger input (SCLK) negative threshold | VT_ | 0.8 | 1.4 | V | VDD=5V | 4 | |
| Schmitt trigger input (SCLK) hysteresis VT+-VT_ | VT+, VT_ | 0.4 | 0.8 | V | VDD=5V | 4 | |
| Schmitt trigger input (SCLK) positive threshold | VT+ | 1 | 2.5 | V | VDD=3V | 4 | |
| Schmitt trigger input (SCLK) negative threshold | VT_ | 0.4 | 1.1 | V | VDD=3V | 4 | |
| Schmitt trigger input (SCLK) hysteresis VT+ VT_ | VT+ VT_ | 0.375 | 0.8 | V | 4 | ||
| XI input low level | 0.8 | V | VDD=5V | 4 | |||
| XI input high level | 3.5 | V | VDD=5V | 4 | |||
| XI input low level | 0.4 | V | VDD=3V | 4 | |||
| XI input high level | 2.5 | V | VDD=3V | 4 | |||
| Power-down mode current | 16 | uA | VDD=5V, XI=0V/VDD | 4 | |||
| Power-down mode current | 8 | uA | VDD=3V, XI=0V/VDD | 4 | |||
| Master Clock Frequency | fCLKIN | 400 | 2500 | kHz | 5 | ||
| Slck↓→DIN Effective acquisition interval | tdo | 0 | 80 | ns | VDD=5V | 5 | |
| Slck↓→DIN Effective acquisition interval | tdo | 0 | 100 | ns | VDD=3V | 5 | |
| SCLK↑ Post-bus withdrawal time | tsout | 10 | 60 | ns | VDD=5V | 5 |
CAD (KiCad official)
- Symbol:
XD7705B - Footprint:
Package_DIP:DIP-16_W7.62mm - 3D model: DIP-16 (KiCad packages3D, STEP)
- 3D model files:
xd7705b-etched.step/xd7705b-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xd7705b.step/xd7705b.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XINLUDA datasheet (12 pp, sha256
91725263468fc1bc, retrieved 2026-11-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# XD7705B
**XINLUDA** · Analog To Digital Converters (ADC) · DIP-16
XD7705B from XINLUDA, in a DIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCLK | input | Serial clock input for reading and writing the on-chip registers, with Schmitt-trigger thresholds (VT+ 1.4 to 3 V and VT- 0.8 to 1.4 V at VDD=5 V; VT+ 1 to 2.5 V and VT- 0.4 to 1.1 V at VDD=3 V). |
| 2 | XI | input | Clock input for a crystal or external master clock, with a master clock range of 400 to 2500 kHz; input low/high levels are 0.8 V / 3.5 V at 5 V and 0.4 V / 2.5 V at 3 V. |
| 3 | XO | output | Clock output for the crystal oscillator (connects to the crystal circuit at XI). |
| 4 | CSN | input | Chip select, active low; registers can only be read or written while CSN is pulled low and CSN should be pulled high after the access. |
| 5 | RESET | input | Reset, active low; pulling it low resets all logic, digital filters and modulators and sets registers to default, with a minimum pulse width of 100 ns. |
| 6 | AIN2P | input | Differential analogue positive input for channel 2; absolute/common-mode range is -0.03 V to VDD+0.03 V with the buffer disabled (BUFEN=0) and 0.05 V to VDD-1.5 V with the buffer enabled (BUFEN=1). |
| 7 | AIN1P | input | Differential analogue positive input for channel 1; absolute/common-mode range is -0.03 V to VDD+0.03 V with the buffer disabled (BUFEN=0) and 0.05 V to VDD-1.5 V with the buffer enabled (BUFEN=1). |
| 8 | AIN1N | input | Differential analogue negative input for channel 1; absolute/common-mode range is -0.03 V to VDD+0.03 V with the buffer disabled (BUFEN=0) and 0.05 V to VDD-1.5 V with the buffer enabled (BUFEN=1). |
| 9 | REFINP | input | Positive input of the differential reference voltage; the datasheet requires REFINP to be greater than REFINN, with a reference of 1.225 V at 3 V supply or 2.5 V at 5 V supply, and references below 1 V raise output noise. |
| 10 | REFINN | input | Negative input of the differential reference voltage; the reference voltage range is 0 to VDD and REFINN must be less than REFINP. |
| 11 | AIN2N | input | Differential analogue negative input for channel 2; absolute/common-mode range is -0.03 V to VDD+0.03 V with the buffer disabled (BUFEN=0) and 0.05 V to VDD-1.5 V with the buffer enabled (BUFEN=1). |
| 12 | OKL | output | Conversion-complete flag output: low means the ADC result register has been updated and can be read, high means conversion or update is in progress and data must not be read. |
| 13 | DOUT | output | Serial data output, shifting the result MSB first with data updated on the falling edge of SCLK. |
| 14 | DIN | input | Serial data input, written on the rising edge of SCLK with a setup time of 30 ns and hold time of 20 ns. |
| 15 | VDD | power_in | Power supply, 3 V or 5 V operating voltage with ±5% range; absolute maximum is -0.3 V to 7 V. |
| 16 | GND | power_in | Ground pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XINLUDA |
| Package | DIP-16 |
| Category | Data Acquisition |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic Supply Voltage | VDD | -0.3 | | 7 | V | TA=+25℃ unless otherwise stated | 3 |
| Operating Temperature Range | Topr | -40 | | 85 | ℃ | TA=+25℃ unless otherwise stated | 3 |
| Storage temperature range | Tstg | -45 | | 125 | ℃ | TA=+25℃ unless otherwise stated | 3 |
| Junction temperature | Tj | | | 125 | ℃ | TA=+25℃ unless otherwise stated | 3 |
| Electrostatic discharge (ESD) Human-body model (HBM) | | | | 2000 | V | Human-body model (HBM) | 3 |
| Analogue input voltage | Vin | -0.3 | | | V | TA=+25℃ unless otherwise stated; printed max is VDD+0.3 | 3 |
| Digital output voltage | Vout | -0.3 | | | V | TA=+25℃ unless otherwise stated; printed max is VDD+0.3 | 3 |
| Integral nonlinearity | | 0 | | 0.01 | %of FSR | Unless otherwise stated, VDD=+5V, REF=2.5V; TA=25℃ | 3 |
| Bipolar negative full scale error | | 0 | | 0.01 | %of FSR/℃ | Unless otherwise stated, VDD=+5V, REF=2.5V; TA=25℃ | 3 |
| REF IN Absolute/Common Mode Voltage | | 0 | | | V | Unless otherwise stated, VDD=+5V, REF=2.5V; TA=25℃; printed max is VDD | 3 |
| AIN Absolute/Common Mode Voltage | | -0.03 | | | V | BUFEN=0; printed max is VDD+0.03 | 3 |
| AIN Absolute/Common Mode Voltage | | 0.05 | | | V | BUFEN=1; printed max is VDD-1.5 | 3 |
| AIN Differential voltage Unipolar input | | 0 | | | V | Unipolar input; printed max is VREP/GAIN | 3 |
| REFINP-REFINN Difference | | 1 | | 1.75 | V | VDD=3V, Vref=1.225V | 3 |
| REFINP-REFINN Difference | | 1 | | 3.5 | V | VDD=5V, Vref=2.5V | 3 |
| VIL input low level | VIL | | | 0.8 | V | VDD=5V | 4 |
| VIL input low level | VIL | | | 0.4 | V | VDD=3V | 4 |
| VIH input high level | VIH | 2 | | | V | | 4 |
| Schmitt trigger input (SCLK) positive threshold | VT+ | 1.4 | | 3 | V | VDD=5V | 4 |
| Schmitt trigger input (SCLK) negative threshold | VT_ | 0.8 | | 1.4 | V | VDD=5V | 4 |
| Schmitt trigger input (SCLK) hysteresis VT+-VT_ | VT+, VT_ | 0.4 | | 0.8 | V | VDD=5V | 4 |
| Schmitt trigger input (SCLK) positive threshold | VT+ | 1 | | 2.5 | V | VDD=3V | 4 |
| Schmitt trigger input (SCLK) negative threshold | VT_ | 0.4 | | 1.1 | V | VDD=3V | 4 |
| Schmitt trigger input (SCLK) hysteresis VT+ VT_ | VT+ VT_ | 0.375 | | 0.8 | V | | 4 |
| XI input low level | | | | 0.8 | V | VDD=5V | 4 |
| XI input high level | | 3.5 | | | V | VDD=5V | 4 |
| XI input low level | | | | 0.4 | V | VDD=3V | 4 |
| XI input high level | | 2.5 | | | V | VDD=3V | 4 |
| Power-down mode current | | | | 16 | uA | VDD=5V, XI=0V/VDD | 4 |
| Power-down mode current | | | | 8 | uA | VDD=3V, XI=0V/VDD | 4 |
| Master Clock Frequency | fCLKIN | 400 | | 2500 | kHz | | 5 |
| Slck↓→DIN Effective acquisition interval | tdo | 0 | | 80 | ns | VDD=5V | 5 |
| Slck↓→DIN Effective acquisition interval | tdo | 0 | | 100 | ns | VDD=3V | 5 |
| SCLK↑ Post-bus withdrawal time | tsout | 10 | | 60 | ns | VDD=5V | 5 |
## CAD (KiCad official)
- Symbol: `XD7705B`
- Footprint: `Package_DIP:DIP-16_W7.62mm`
- 3D model: DIP-16 (KiCad packages3D, STEP)
- 3D model files: `xd7705b-etched.step` / `xd7705b-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xd7705b.step` / `xd7705b.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [XINLUDA datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588896416454348800) (12 pp, sha256 `91725263468fc1bc`, retrieved 2026-11-11, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/xd7705b-datasheet.pdf)