main
Ray xd7219: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 147a383
{
  "schema_version": 1,
  "type": "component",
  "slug": "xd7219",
  "title": "XD7219",
  "brief": "XINLUDA Digital Tube Drivers, DIP-24. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "led drivers",
    "xd7219",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "XD7219",
    "manufacturer": "XINLUDA",
    "package": "DIP-24",
    "pin_count": 24,
    "category": "LED Drivers",
    "subcategory": "Digital Tube Drivers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8757990168781836288",
    "parts": {
      "symbol": "xd7219.kicad_sym",
      "footprint": "xd7219.kicad_mod",
      "model_3d": "xd7219-etched.glb",
      "model_3d_plain": "xd7219.glb",
      "model_3d_step": "xd7219-etched.step",
      "model_3d_step_plain": "xd7219.step",
      "lbr": "xd7219.lbr"
    },
    "distributor_links": {
      "lcsc": "C556285"
    },
    "pins": [
      {
        "number": "1",
        "name": "DIN",
        "type": "input",
        "description": "Serial-Data Input; data is loaded into the internal 16-bit shift register on CLK rising edge."
      },
      {
        "number": "2",
        "name": "DIG 0",
        "type": "output",
        "description": "Digit 0 drive line that sinks current from the display common cathode; pulled to V+ when turned off."
      },
      {
        "number": "3",
        "name": "DIG 1",
        "type": "output",
        "description": "Digit 1 drive line that sinks current from the display common cathode; pulled to V+ when turned off."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection; both GND pins must be connected."
      },
      {
        "number": "5",
        "name": "DIG 2",
        "type": "output",
        "description": "Digit 2 drive line that sinks current from the display common cathode; pulled to V+ when turned off."
      },
      {
        "number": "6",
        "name": "DIG 3",
        "type": "output",
        "description": "Digit 3 drive line that sinks current from the display common cathode; pulled to V+ when turned off."
      },
      {
        "number": "7",
        "name": "DIG 4",
        "type": "output",
        "description": "Digit 4 drive line that sinks current from the display common cathode; pulled to V+ when turned off."
      },
      {
        "number": "8",
        "name": "DIG 5",
        "type": "output",
        "description": "Digit 5 drive line that sinks current from the display common cathode; pulled to V+ when turned off."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection; both GND pins must be connected."
      },
      {
        "number": "10",
        "name": "DIG 6",
        "type": "output",
        "description": "Digit 6 drive line that sinks current from the display common cathode; pulled to V+ when turned off."
      },
      {
        "number": "11",
        "name": "DIG 7",
        "type": "output",
        "description": "Digit 7 drive line that sinks current from the display common cathode; pulled to V+ when turned off."
      },
      {
        "number": "12",
        "name": "LOAD",
        "type": "input",
        "description": "Load-Data Input; the last 16 bits of serial data are latched on LOAD rising edge."
      },
      {
        "number": "13",
        "name": "CLK",
        "type": "input",
        "description": "Serial-Clock Input; 10MHz maximum rate; data shifts into shift register on CLK rising edge and outputs on falling edge."
      },
      {
        "number": "14",
        "name": "SEG A",
        "type": "output",
        "description": "Segment A drive line that sources current to the display; pulled to GND when turned off."
      },
      {
        "number": "15",
        "name": "SEG B",
        "type": "output",
        "description": "Segment B drive line that sources current to the display; pulled to GND when turned off."
      },
      {
        "number": "16",
        "name": "SEG C",
        "type": "output",
        "description": "Segment C drive line that sources current to the display; pulled to GND when turned off."
      },
      {
        "number": "17",
        "name": "SEG D",
        "type": "output",
        "description": "Segment D drive line that sources current to the display; pulled to GND when turned off."
      },
      {
        "number": "18",
        "name": "ISET",
        "type": "input",
        "description": "Current setting input; connect to V+ through a resistor (RSET) to set the peak segment current (nominally 100× the ISET pin current)."
      },
      {
        "number": "19",
        "name": "V+",
        "type": "power_in",
        "description": "Positive Supply Voltage; connect to +5V nominal (operating range 4.0V to 5.5V per electrical characteristics on Page 3)."
      },
      {
        "number": "20",
        "name": "SEG E",
        "type": "output",
        "description": "Segment E drive line that sources current to the display; pulled to GND when turned off."
      },
      {
        "number": "21",
        "name": "SEG F",
        "type": "output",
        "description": "Segment F drive line that sources current to the display; pulled to GND when turned off."
      },
      {
        "number": "22",
        "name": "SEG G",
        "type": "output",
        "description": "Segment G drive line that sources current to the display; pulled to GND when turned off."
      },
      {
        "number": "23",
        "name": "DP",
        "type": "output",
        "description": "Decimal Point drive line that sources current to the display; pulled to GND when turned off."
      },
      {
        "number": "24",
        "name": "DOUT",
        "type": "output",
        "description": "Serial-Data Output; propagates input data from DIN 16.5 clock cycles later; used for daisy-chaining multiple devices; never high-impedance."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "3/24 pins cited to the wrong page (name found elsewhere): ['15:SEG B@p6', '21:SEG F@p6', '22:SEG G@p6']"
        ],
        "pages_sent": 17,
        "cost_usd": 0.1942,
        "at": "2026-09-22T03:56:46"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8757990168781836288",
        "pages": 17,
        "sha256": "2c556d81c57578bb",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 24,
        "described": 24,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "xd7219.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          31.75,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "305ecc33779421c4eaa38993d80432e50eb6e02cae0807055a4a07ffcb2f0d2b",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "xd7219-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          31.75,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "6035ba5de3c17464d620ba5d36310d8efc59803d27ebb53e9a00f1d9394ebc84",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "XINLUDA",
      "Package": "DIP-24",
      "Category": "LED Drivers",
      "Pins": "24"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "xd7219"
  ],
  "discovery_pitch": "XD7219 (XINLUDA) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "xd7219.kicad_sym",
    "xd7219.kicad_mod",
    "xd7219.glb",
    "xd7219.step",
    "xd7219.lbr",
    "docs/hero.png",
    "docs/xd7219-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-25T14:25:30.378Z"
}