main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs xd7219: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers xd7219: viewers · Ray
package.json xd7219: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json xd7219: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/xd7219 · Ray
xd7219-etched.fit.json xd7219: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
xd7219-etched.glb xd7219: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
xd7219-etched.step xd7219: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
xd7219.glb Publish 0.1.0 · Ray
xd7219.kicad_mod Publish 0.1.0 · Ray
xd7219.kicad_sym Publish 0.1.0 · Ray
xd7219.lbr Publish 0.1.0 · Ray
xd7219.step Publish 0.1.0 · Ray

XD7219

XINLUDA · Digital Tube Drivers · DIP-24

XD7219 from XINLUDA, in a DIP-24. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DIN input Serial-Data Input; data is loaded into the internal 16-bit shift register on CLK rising edge.
2 DIG 0 output Digit 0 drive line that sinks current from the display common cathode; pulled to V+ when turned off.
3 DIG 1 output Digit 1 drive line that sinks current from the display common cathode; pulled to V+ when turned off.
4 GND power_in Ground connection; both GND pins must be connected.
5 DIG 2 output Digit 2 drive line that sinks current from the display common cathode; pulled to V+ when turned off.
6 DIG 3 output Digit 3 drive line that sinks current from the display common cathode; pulled to V+ when turned off.
7 DIG 4 output Digit 4 drive line that sinks current from the display common cathode; pulled to V+ when turned off.
8 DIG 5 output Digit 5 drive line that sinks current from the display common cathode; pulled to V+ when turned off.
9 GND power_in Ground connection; both GND pins must be connected.
10 DIG 6 output Digit 6 drive line that sinks current from the display common cathode; pulled to V+ when turned off.
11 DIG 7 output Digit 7 drive line that sinks current from the display common cathode; pulled to V+ when turned off.
12 LOAD input Load-Data Input; the last 16 bits of serial data are latched on LOAD rising edge.
13 CLK input Serial-Clock Input; 10MHz maximum rate; data shifts into shift register on CLK rising edge and outputs on falling edge.
14 SEG A output Segment A drive line that sources current to the display; pulled to GND when turned off.
15 SEG B output Segment B drive line that sources current to the display; pulled to GND when turned off.
16 SEG C output Segment C drive line that sources current to the display; pulled to GND when turned off.
17 SEG D output Segment D drive line that sources current to the display; pulled to GND when turned off.
18 ISET input Current setting input; connect to V+ through a resistor (RSET) to set the peak segment current (nominally 100× the ISET pin current).
19 V+ power_in Positive Supply Voltage; connect to +5V nominal (operating range 4.0V to 5.5V per electrical characteristics on Page 3).
20 SEG E output Segment E drive line that sources current to the display; pulled to GND when turned off.
21 SEG F output Segment F drive line that sources current to the display; pulled to GND when turned off.
22 SEG G output Segment G drive line that sources current to the display; pulled to GND when turned off.
23 DP output Decimal Point drive line that sources current to the display; pulled to GND when turned off.
24 DOUT output Serial-Data Output; propagates input data from DIN 16.5 clock cycles later; used for daisy-chaining multiple devices; never high-impedance.

Key specifications

Parameter Value
Manufacturer XINLUDA
Package DIP-24
Category LED Drivers
Pins 24

CAD (KiCad official)

  • Symbol: XD7219
  • Footprint: Package_DIP:DIP-24_W7.62mm
  • 3D model: DIP-24 (KiCad packages3D, STEP)
  • 3D model files: xd7219-etched.step / xd7219-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xd7219.step / xd7219.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: XINLUDA datasheet (17 pp, sha256 2c556d81c57578bb, retrieved 2026-09-22, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF