main
Ray Publish 0.1.1 26138a2
{
  "schema_version": 1,
  "type": "component",
  "slug": "xc9141a50cmr-g",
  "title": "XC9141A50CMR-G",
  "brief": "Torex Semicon DC-DC Converters, SOT-25-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.1",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power supply chip",
    "xc9141a50cmr-g",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "XC9141A50CMR-G",
    "manufacturer": "Torex Semicon",
    "package": "SOT-25-5",
    "pin_count": 5,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/e9c2c3e995260bddea0b019e1874549c.pdf",
    "parts": {
      "symbol": "xc9141a50cmr-g.kicad_sym",
      "footprint": "xc9141a50cmr-g.kicad_mod",
      "model_3d": "xc9141a50cmr-g-hero.glb",
      "model_3d_plain": "xc9141a50cmr-g.glb",
      "model_3d_step": "xc9141a50cmr-g-etched.step",
      "model_3d_step_plain": "xc9141a50cmr-g.step",
      "lbr": "xc9141a50cmr-g.lbr"
    },
    "distributor_links": {
      "lcsc": "C2469138",
      "digikey": "XC9141A50CMR-G-ND"
    },
    "distributor_check": {
      "checked_at": "2026-11-04T18:53:09Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "XC9141A50CMR-G-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CE",
        "type": "input",
        "description": "Chip enable: driving CE low puts the device in stand-by and high makes it active; CE is a CMOS input with absolute maximum voltage of -0.3 to +7.0 V and must not be left open."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for all voltages in the device; the GND pin should be reinforced with a thick, short trace because switching ground current can destabilize the IC."
      },
      {
        "number": "3",
        "name": "BAT",
        "type": "power_in",
        "description": "Power input with an absolute maximum pin voltage of -0.3 to +7.0 V and an input voltage range of 0.65 V to 6.0 V; a bypass capacitor CIN should be placed as close as possible to BAT and GND."
      },
      {
        "number": "4",
        "name": "VOUT",
        "type": "power_out",
        "description": "Boosted output voltage pin with an absolute maximum voltage of -0.3 to +7.0 V, fixed at 1.8 V to 5.5 V in 0.1 V steps."
      },
      {
        "number": "5",
        "name": "Lx",
        "type": "output",
        "description": "Switching node connected to the inductor with an absolute maximum pin voltage of -0.3 to +7.0 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Page 6 pin table lists SOT-25 as a 5-pin column (CE=1, GND=2, BAT=3, VOUT=4, Lx=5, with no SOT-25 en"
        ],
        "pages_sent": 11,
        "cost_usd": 0.0557,
        "at": "2026-11-04T18:53:01"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/e9c2c3e995260bddea0b019e1874549c.pdf",
        "pages": 34,
        "sha256": "cac21233c885a026",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 5,
        "described": 5,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "xc9141a50cmr-g.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",
        "checked": "2026-11-04",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "xc9141a50cmr-g-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "2b195838a444d09aaa1c124c18d437e3abf4facce6c6f23ab58c8ace1a8780e9",
        "checked": "2026-11-04",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Torex Semicon",
      "Package": "SOT-25-5",
      "Category": "Power Supply Chip",
      "Pins": "5"
    },
    "appearance": {
      "contacts": {
        "quote": "6-2. Sn-AG-Cu is used for the package terminals. If eutectic solder is used, mounting reliability is decreased. Please do not use eutectic solder paste.",
        "page": 16,
        "doc": "ds.pdf",
        "plating": "tin"
      },
      "version": 1,
      "datasheet_sha256": "cac21233c885a02642645a650140d1d9ed7e1fb7f79109df5020e131859e6a6c"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "cac21233c885a02642645a650140d1d9ed7e1fb7f79109df5020e131859e6a6c",
      "rows": [
        {
          "name": "Output Voltage",
          "symbol": "VOUT",
          "kind": "electrical",
          "unit": "V",
          "min": 4.9,
          "typ": 5,
          "max": 5.1,
          "conditions": "Voltage to start oscillation while VOUT=VOUT(T)×1.03→VOUT(T)×0.97 (Table 2, VOUT(T)=5.0V)",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Input Voltage",
          "symbol": "VBAT",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 6,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Operation Start Voltage",
          "symbol": "VST1",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.9,
          "conditions": "RL=1kΩ",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Oscillation Frequency (fOSC=1.2MHz)",
          "symbol": "fOSC",
          "kind": "electrical",
          "unit": "MHz",
          "min": 1.02,
          "typ": 1.2,
          "max": 1.38,
          "conditions": "VBAT= VOUT(T)×0.5, IOUT=100mA, fOSC=1.2MHz",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Maximum Duty Cycle (fOSC=1.2MHz)",
          "symbol": "DMAX",
          "kind": "electrical",
          "unit": "%",
          "min": 85,
          "typ": 93,
          "max": 98,
          "conditions": "VBAT=1.2V, VOUT= VOUT(T)-0.2V, fOSC=1.2MHz",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Minimum Duty Cycle",
          "symbol": "DMIN",
          "kind": "electrical",
          "unit": "%",
          "min": null,
          "typ": null,
          "max": 0,
          "conditions": "VOUT=VBAT= VOUT(T)+0.5V",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "PFM Switching Current",
          "symbol": "IPFM",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 165,
          "max": 230,
          "conditions": "VBAT=1.5V, RL is selected with VOUT(T), Refer to Table 1.",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Stand-by Current (A type)",
          "symbol": "ISTB",
          "kind": "electrical",
          "unit": "μA",
          "min": null,
          "typ": 0,
          "max": 1,
          "conditions": "VBAT=VLx=6.0V, VCE=0.0V",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Lx SW H Leakage Current (A type)",
          "symbol": "ILXLH",
          "kind": "electrical",
          "unit": "μA",
          "min": null,
          "typ": 0,
          "max": 1,
          "conditions": "VBAT=6.0V, VCE=0.0V, VLx=6.0V",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Soft-Start Time (fOSC=1.2MHz)",
          "symbol": "tSS",
          "kind": "electrical",
          "unit": "ms",
          "min": 0.6,
          "typ": 1,
          "max": 2.5,
          "conditions": "VBAT= VOUT(T)×0.6, VOUT=VOUT(T)×0.9, After H is fed to CE, fOSC=1.2MHz",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "CL Discharge Resistance (A type)",
          "symbol": "RDCHG",
          "kind": "electrical",
          "unit": "Ω",
          "min": 100,
          "typ": 180,
          "max": 400,
          "conditions": "VBAT= 3.3V, VOUT=3.3V, VCE=0.0V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "CE H Voltage",
          "symbol": "VCEH",
          "kind": "electrical",
          "unit": "V",
          "min": 0.8,
          "typ": null,
          "max": 6,
          "conditions": "VOUT= VOUT(T)-0.15V, Applied voltage to VCE, Voltage changes Lx to be generated.",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "CE L Voltage",
          "symbol": "VCEL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.2,
          "conditions": "VOUT= VOUT(T)-0.15V, Applied voltage to VCE, Voltage changes Lx to H level.",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "CE H Current",
          "symbol": "ICEH",
          "kind": "electrical",
          "unit": "μA",
          "min": -0.1,
          "typ": null,
          "max": 0.1,
          "conditions": "VBAT=6.0V, VOUT=6.0V, VLx=6.0V, VCE=6.0V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "CE L Current",
          "symbol": "ICEL",
          "kind": "electrical",
          "unit": "μA",
          "min": -0.1,
          "typ": null,
          "max": 0.1,
          "conditions": "VBAT=6.0V, VOUT=6.0V, VLx=6.0V, VCE=0.0V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "BAT Pin Voltage",
          "symbol": "VBAT",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 7,
          "conditions": "Ta=25℃",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Lx Pin Voltage",
          "symbol": "VLx",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 7,
          "conditions": "Ta=25℃",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "VOUT Pin Voltage",
          "symbol": "VOUT",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 7,
          "conditions": "Ta=25℃",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "CE Pin Voltage",
          "symbol": "VCE",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 7,
          "conditions": "Ta=25℃",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Power Dissipation (SOT-25)",
          "symbol": "Pd",
          "kind": "absolute_maximum",
          "unit": "mW",
          "min": null,
          "typ": null,
          "max": 600,
          "conditions": "PCB mounted",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Operating Ambient Temperature",
          "symbol": "Topr",
          "kind": "absolute_maximum",
          "unit": "℃",
          "min": -40,
          "typ": null,
          "max": 85,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Storage Temperature",
          "symbol": "Tstg",
          "kind": "absolute_maximum",
          "unit": "℃",
          "min": -55,
          "typ": null,
          "max": 125,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "xc9141a50cmr-g"
  ],
  "discovery_pitch": "XC9141A50CMR-G (Torex Semicon) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "xc9141a50cmr-g.kicad_sym",
    "xc9141a50cmr-g.kicad_mod",
    "xc9141a50cmr-g.glb",
    "xc9141a50cmr-g.step",
    "xc9141a50cmr-g.lbr",
    "docs/hero.png",
    "docs/xc9141a50cmr-g-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "xc9141a50cmr-g-hero.glb",
    "xc9141a50cmr-g-hero.overlay.json",
    "xc9141a50cmr-g-etched.glb",
    "xc9141a50cmr-g-etched.step"
  ],
  "visibility": "public",
  "description": "Torex Semicon DC-DC Converters, SOT-25-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "org": "adom"
}