main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers xc9141a50cmr-g: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 5 pins · Ray
xc9141a50cmr-g-etched.glb Publish 0.1.0 · Ray
xc9141a50cmr-g-etched.step xc9141a50cmr-g: factory component page (tier=lcsc) · Ray
xc9141a50cmr-g-hero.glb xc9141a50cmr-g: hero GLB from the etched model (keeps the MPN mark) · Ray
xc9141a50cmr-g-hero.overlay.json Publish 0.1.0 · Ray
xc9141a50cmr-g.glb Publish 0.1.0 · Ray
xc9141a50cmr-g.kicad_mod Publish 0.1.0 · Ray
xc9141a50cmr-g.kicad_sym Publish 0.1.0 · Ray
xc9141a50cmr-g.lbr Publish 0.1.0 · Ray
xc9141a50cmr-g.step Publish 0.1.0 · Ray

XC9141A50CMR-G

Torex Semicon · DC-DC Converters · SOT-25-5

XC9141A50CMR-G from Torex Semicon, in a SOT-25-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CE input Chip enable: driving CE low puts the device in stand-by and high makes it active; CE is a CMOS input with absolute maximum voltage of -0.3 to +7.0 V and must not be left open.
2 GND power_in Ground reference for all voltages in the device; the GND pin should be reinforced with a thick, short trace because switching ground current can destabilize the IC.
3 BAT power_in Power input with an absolute maximum pin voltage of -0.3 to +7.0 V and an input voltage range of 0.65 V to 6.0 V; a bypass capacitor CIN should be placed as close as possible to BAT and GND.
4 VOUT power_out Boosted output voltage pin with an absolute maximum voltage of -0.3 to +7.0 V, fixed at 1.8 V to 5.5 V in 0.1 V steps.
5 Lx output Switching node connected to the inductor with an absolute maximum pin voltage of -0.3 to +7.0 V.

Key specifications

Parameter Value
Manufacturer Torex Semicon
Package SOT-25-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage VOUT 4.9 5 5.1 V Voltage to start oscillation while VOUT=VOUT(T)×1.03→VOUT(T)×0.97 (Table 2, VOUT(T)=5.0V) 9
Input Voltage VBAT 6 V 7
Operation Start Voltage VST1 0.9 V RL=1kΩ 7
Oscillation Frequency (fOSC=1.2MHz) fOSC 1.02 1.2 1.38 MHz VBAT= VOUT(T)×0.5, IOUT=100mA, fOSC=1.2MHz 7
Maximum Duty Cycle (fOSC=1.2MHz) DMAX 85 93 98 % VBAT=1.2V, VOUT= VOUT(T)-0.2V, fOSC=1.2MHz 7
Minimum Duty Cycle DMIN 0 % VOUT=VBAT= VOUT(T)+0.5V 7
PFM Switching Current IPFM 165 230 mA VBAT=1.5V, RL is selected with VOUT(T), Refer to Table 1. 7
Stand-by Current (A type) ISTB 0 1 μA VBAT=VLx=6.0V, VCE=0.0V 7
Lx SW H Leakage Current (A type) ILXLH 0 1 μA VBAT=6.0V, VCE=0.0V, VLx=6.0V 7
Soft-Start Time (fOSC=1.2MHz) tSS 0.6 1 2.5 ms VBAT= VOUT(T)×0.6, VOUT=VOUT(T)×0.9, After H is fed to CE, fOSC=1.2MHz 8
CL Discharge Resistance (A type) RDCHG 100 180 400 Ω VBAT= 3.3V, VOUT=3.3V, VCE=0.0V 8
CE H Voltage VCEH 0.8 6 V VOUT= VOUT(T)-0.15V, Applied voltage to VCE, Voltage changes Lx to be generated. 8
CE L Voltage VCEL 0.2 V VOUT= VOUT(T)-0.15V, Applied voltage to VCE, Voltage changes Lx to H level. 8
CE H Current ICEH -0.1 0.1 μA VBAT=6.0V, VOUT=6.0V, VLx=6.0V, VCE=6.0V 8
CE L Current ICEL -0.1 0.1 μA VBAT=6.0V, VOUT=6.0V, VLx=6.0V, VCE=0.0V 8
BAT Pin Voltage VBAT -0.3 7 V Ta=25℃ 6
Lx Pin Voltage VLx -0.3 7 V Ta=25℃ 6
VOUT Pin Voltage VOUT -0.3 7 V Ta=25℃ 6
CE Pin Voltage VCE -0.3 7 V Ta=25℃ 6
Power Dissipation (SOT-25) Pd 600 mW PCB mounted 6
Operating Ambient Temperature Topr -40 85 ℃ 6
Storage Temperature Tstg -55 125 ℃ 6

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin 6-2. Sn-AG-Cu is used for the package terminals. If eutectic solder is used, mounting reliability is decreased. Please do not use eutectic solder paste. 16

CAD (KiCad official)

  • Symbol: XC9141A50CMR-G
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-25-5 (KiCad packages3D, STEP)
  • 3D model files: xc9141a50cmr-g-etched.step / xc9141a50cmr-g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xc9141a50cmr-g.step / xc9141a50cmr-g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Torex Semicon datasheet (34 pp, sha256 cac21233c885a026, retrieved 2026-11-04, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF