main
Ray
Publish 0.1.0
5cab7ed
XC6233H301MR-G
Torex Semicon · Linear Voltage Regulators (LDO) · SOT-25
XC6233H301MR-G from Torex Semicon, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power supply input; the datasheet specifies an input voltage range of 1.7V to 5.5V, with an absolute maximum of -0.3V to +6.0V. |
| 2 | VSS | power_in | Ground pin to which all voltages are referenced; the output capacitor CL should be placed as close as possible between VOUT and VSS, and the input capacitor CIN between VIN and VSS. |
| 3 | CE | input | ON/OFF control input that is active high: H level enables the regulator, L level (VSS to 0.3V) puts it in stand-by, and an open pin is treated as stand-by because the type H device has an internal pull-down resistor. |
| 4 | NC | unconnected | No connection. |
| 5 | VOUT | power_out | Regulated output pin (1.2V to 3.6V in 0.05V steps, ±1% accuracy) with a maximum output current of 200mA, which requires a 1.0μF ceramic output capacitor for phase compensation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Torex Semicon |
| Package | SOT-25 |
| Category | Power Management |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (E-0, VOUT(T)=3.00V) | VOUT(E) | 2.97 | 3.03 | V | VOUT(T)≥2.0V, E-0 (*3); unless otherwise stated VIN=VOUT(T)+1V, VCE=VIN, IOUT=1mA | 7 | |
| Maximum Output Current | IOUTMAX | 200 | mA | 6 | |||
| Input Voltage | VIN | 1.7 | 5.5 | V | 6 | ||
| CE "H" Level Voltage | VCEH | 0.9 | 5.5 | V | 6 | ||
| CE "L" Level Voltage | VCEL | 0.3 | V | 6 | |||
| CE "L" Level Current | ICEL | -0.1 | 0.1 | μA | VCE=VSS | 6 | |
| CE "H" Level Current (Type H) | ICEH | 2.5 | 6 | 9.5 | μA | VCE=VIN=5.5V | 6 |
| Load Regulation | ΔVOUT | 25 | 45 | mV | 0.1mA IOUT 200mA | 6 | |
| Supply Current | IDD | 45 | 87 | μA | IOUT=0mA | 6 | |
| Stand-by Current | ISTB | 0.01 | 0.1 | μA | VCE=VSS | 6 | |
| Line Regulation | ΔVOUT/(ΔVIN VOUT) | 0.02 | 0.1 | %/V | VOUT(T)≥2.0V, IOUT=30mA, 2.5V≤VIN≤5.5V; second printed row: VOUT(T)+0.5V≤VIN≤5.5V | 6 | |
| Output Voltage Temperature Characteristics (±80 ppm/℃ printed as ±) | ΔVOUT/(ΔTopr VOUT) | -80 | 80 | ppm/℃ | IOUT=10mA, -40℃≦Topr≦85℃ | 6 | |
| Current Limit | ILIM | 200 | 255 | mA | 6 | ||
| Absolute Maximum Input Voltage | VIN | -0.3 | 6 | V | 5 | ||
| Absolute Maximum Output Current | IOUT | 275 | mA | (*1) Please use within the range of IOUT Pd/ VIN-VOUT | 5 | ||
| Absolute Maximum Output Voltage | VOUT | -0.3 | 6 | V | (*2) Lowest of VIN+0.3 or +6.0 applies | 5 | |
| Absolute Maximum CE Input Voltage | VCE | -0.3 | 6 | V | 5 | ||
| Power Dissipation (SOT-25) | Pd | 600 | mW | PCB mounted (*3) | 5 | ||
| Operating Ambient Temperature | Topr | -40 | 85 | ℃ | 5 | ||
| Storage Temperature | Tstg | -55 | 125 | ℃ | 5 | ||
| Thermal Resistance (SOT-25) | 166.67 | ℃/W | Board mount, Tjmax=125℃ (board of SOT-26 used per datasheet) | 29 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | and terminal pin No.1. Each layer has approximately 800mm2 copper | 26 |
CAD (KiCad official)
- Symbol:
XC6233H301MR-G - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25 (KiCad packages3D, STEP)
- 3D model files:
xc6233h301mr-g-etched.step/xc6233h301mr-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xc6233h301mr-g.step/xc6233h301mr-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Torex Semicon datasheet (32 pp, sha256
73a88d038d46ed47, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# XC6233H301MR-G
**Torex Semicon** · Linear Voltage Regulators (LDO) · SOT-25
XC6233H301MR-G from Torex Semicon, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power supply input; the datasheet specifies an input voltage range of 1.7V to 5.5V, with an absolute maximum of -0.3V to +6.0V. |
| 2 | VSS | power_in | Ground pin to which all voltages are referenced; the output capacitor CL should be placed as close as possible between VOUT and VSS, and the input capacitor CIN between VIN and VSS. |
| 3 | CE | input | ON/OFF control input that is active high: H level enables the regulator, L level (VSS to 0.3V) puts it in stand-by, and an open pin is treated as stand-by because the type H device has an internal pull-down resistor. |
| 4 | NC | unconnected | No connection. |
| 5 | VOUT | power_out | Regulated output pin (1.2V to 3.6V in 0.05V steps, ±1% accuracy) with a maximum output current of 200mA, which requires a 1.0μF ceramic output capacitor for phase compensation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Torex Semicon |
| Package | SOT-25 |
| Category | Power Management |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (E-0, VOUT(T)=3.00V) | VOUT(E) | 2.97 | | 3.03 | V | VOUT(T)≥2.0V, E-0 (*3); unless otherwise stated VIN=VOUT(T)+1V, VCE=VIN, IOUT=1mA | 7 |
| Maximum Output Current | IOUTMAX | 200 | | | mA | | 6 |
| Input Voltage | VIN | 1.7 | | 5.5 | V | | 6 |
| CE "H" Level Voltage | VCEH | 0.9 | | 5.5 | V | | 6 |
| CE "L" Level Voltage | VCEL | | | 0.3 | V | | 6 |
| CE "L" Level Current | ICEL | -0.1 | | 0.1 | μA | VCE=VSS | 6 |
| CE "H" Level Current (Type H) | ICEH | 2.5 | 6 | 9.5 | μA | VCE=VIN=5.5V | 6 |
| Load Regulation | ΔVOUT | | 25 | 45 | mV | 0.1mA IOUT 200mA | 6 |
| Supply Current | IDD | | 45 | 87 | μA | IOUT=0mA | 6 |
| Stand-by Current | ISTB | | 0.01 | 0.1 | μA | VCE=VSS | 6 |
| Line Regulation | ΔVOUT/(ΔVIN VOUT) | | 0.02 | 0.1 | %/V | VOUT(T)≥2.0V, IOUT=30mA, 2.5V≤VIN≤5.5V; second printed row: VOUT(T)+0.5V≤VIN≤5.5V | 6 |
| Output Voltage Temperature Characteristics (±80 ppm/℃ printed as ±) | ΔVOUT/(ΔTopr VOUT) | -80 | | 80 | ppm/℃ | IOUT=10mA, -40℃≦Topr≦85℃ | 6 |
| Current Limit | ILIM | 200 | 255 | | mA | | 6 |
| Absolute Maximum Input Voltage | VIN | -0.3 | | 6 | V | | 5 |
| Absolute Maximum Output Current | IOUT | | | 275 | mA | (*1) Please use within the range of IOUT Pd/ VIN-VOUT | 5 |
| Absolute Maximum Output Voltage | VOUT | -0.3 | | 6 | V | (*2) Lowest of VIN+0.3 or +6.0 applies | 5 |
| Absolute Maximum CE Input Voltage | VCE | -0.3 | | 6 | V | | 5 |
| Power Dissipation (SOT-25) | Pd | | | 600 | mW | PCB mounted (*3) | 5 |
| Operating Ambient Temperature | Topr | -40 | | 85 | ℃ | | 5 |
| Storage Temperature | Tstg | -55 | | 125 | ℃ | | 5 |
| Thermal Resistance (SOT-25) | | | 166.67 | | ℃/W | Board mount, Tjmax=125℃ (board of SOT-26 used per datasheet) | 29 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | and terminal pin No.1. Each layer has approximately 800mm2 copper | 26 |
## CAD (KiCad official)
- Symbol: `XC6233H301MR-G`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-25 (KiCad packages3D, STEP)
- 3D model files: `xc6233h301mr-g-etched.step` / `xc6233h301mr-g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xc6233h301mr-g.step` / `xc6233h301mr-g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Torex Semicon datasheet](docs/xc6233h301mr-g-datasheet.pdf) (32 pp, sha256 `73a88d038d46ed47`, retrieved 2026-10-30, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/xc6233h301mr-g-datasheet.pdf)