main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers xc6233h301mr-g: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 5 pins · Ray
xc6233h301mr-g-etched.glb Publish 0.1.0 · Ray
xc6233h301mr-g-etched.step xc6233h301mr-g: factory component page (tier=lcsc) · Ray
xc6233h301mr-g-hero.glb xc6233h301mr-g: hero GLB from the etched model (keeps the MPN mark) · Ray
xc6233h301mr-g-hero.overlay.json Publish 0.1.0 · Ray
xc6233h301mr-g.glb Publish 0.1.0 · Ray
xc6233h301mr-g.kicad_mod Publish 0.1.0 · Ray
xc6233h301mr-g.kicad_sym Publish 0.1.0 · Ray
xc6233h301mr-g.lbr Publish 0.1.0 · Ray
xc6233h301mr-g.step Publish 0.1.0 · Ray

XC6233H301MR-G

Torex Semicon · Linear Voltage Regulators (LDO) · SOT-25

XC6233H301MR-G from Torex Semicon, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Power supply input; the datasheet specifies an input voltage range of 1.7V to 5.5V, with an absolute maximum of -0.3V to +6.0V.
2 VSS power_in Ground pin to which all voltages are referenced; the output capacitor CL should be placed as close as possible between VOUT and VSS, and the input capacitor CIN between VIN and VSS.
3 CE input ON/OFF control input that is active high: H level enables the regulator, L level (VSS to 0.3V) puts it in stand-by, and an open pin is treated as stand-by because the type H device has an internal pull-down resistor.
4 NC unconnected No connection.
5 VOUT power_out Regulated output pin (1.2V to 3.6V in 0.05V steps, ±1% accuracy) with a maximum output current of 200mA, which requires a 1.0μF ceramic output capacitor for phase compensation.

Key specifications

Parameter Value
Manufacturer Torex Semicon
Package SOT-25
Category Power Management
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage (E-0, VOUT(T)=3.00V) VOUT(E) 2.97 3.03 V VOUT(T)≥2.0V, E-0 (*3); unless otherwise stated VIN=VOUT(T)+1V, VCE=VIN, IOUT=1mA 7
Maximum Output Current IOUTMAX 200 mA 6
Input Voltage VIN 1.7 5.5 V 6
CE "H" Level Voltage VCEH 0.9 5.5 V 6
CE "L" Level Voltage VCEL 0.3 V 6
CE "L" Level Current ICEL -0.1 0.1 μA VCE=VSS 6
CE "H" Level Current (Type H) ICEH 2.5 6 9.5 μA VCE=VIN=5.5V 6
Load Regulation ΔVOUT 25 45 mV 0.1mA IOUT 200mA 6
Supply Current IDD 45 87 μA IOUT=0mA 6
Stand-by Current ISTB 0.01 0.1 μA VCE=VSS 6
Line Regulation ΔVOUT/(ΔVIN VOUT) 0.02 0.1 %/V VOUT(T)≥2.0V, IOUT=30mA, 2.5V≤VIN≤5.5V; second printed row: VOUT(T)+0.5V≤VIN≤5.5V 6
Output Voltage Temperature Characteristics (±80 ppm/℃ printed as ±) ΔVOUT/(ΔTopr VOUT) -80 80 ppm/℃ IOUT=10mA, -40℃≦Topr≦85℃ 6
Current Limit ILIM 200 255 mA 6
Absolute Maximum Input Voltage VIN -0.3 6 V 5
Absolute Maximum Output Current IOUT 275 mA (*1) Please use within the range of IOUT Pd/ VIN-VOUT 5
Absolute Maximum Output Voltage VOUT -0.3 6 V (*2) Lowest of VIN+0.3 or +6.0 applies 5
Absolute Maximum CE Input Voltage VCE -0.3 6 V 5
Power Dissipation (SOT-25) Pd 600 mW PCB mounted (*3) 5
Operating Ambient Temperature Topr -40 85 ℃ 5
Storage Temperature Tstg -55 125 ℃ 5
Thermal Resistance (SOT-25) 166.67 ℃/W Board mount, Tjmax=125℃ (board of SOT-26 used per datasheet) 29

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper and terminal pin No.1. Each layer has approximately 800mm2 copper 26

CAD (KiCad official)

  • Symbol: XC6233H301MR-G
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-25 (KiCad packages3D, STEP)
  • 3D model files: xc6233h301mr-g-etched.step / xc6233h301mr-g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xc6233h301mr-g.step / xc6233h301mr-g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Torex Semicon datasheet (32 pp, sha256 73a88d038d46ed47, retrieved 2026-10-30, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF