main
Ray
Publish 0.1.0
e590634
XC6227C251MR-G
Torex Semicon · Linear Voltage Regulators (LDO) · SOT-25
XC6227C251MR-G from Torex Semicon, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input with operating range 1.7V to 6.0V (absolute max 6.5V); connect a 1.0μF or higher ceramic input capacitor to VSS. |
| 2 | VSS | power_in | Ground pin. |
| 3 | CE | input | Active-high ON/OFF control: high level 1.2V to 6.0V enables the output, low level VSS to 0.3V places the IC in stand-by, and the C type has an internal pull-down resistor so an open pin means stand-by. |
| 4 | NC | unconnected | No connection. |
| 5 | VOUT | power_out | Regulated output (2.5V for this XC6227C251) delivering up to 700mA, requiring an output capacitor of 2.2μF or higher ceramic for phase compensation, with reverse current protection if VOUT exceeds VIN (keep external supply at 6.0V or less). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Torex Semicon |
| Package | SOT-25 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT(E) | 2.475 | 2.5 | 2.525 | V | VOUT(T)=2.50V, VCE=VIN, IOUT=10mA, Ta=25℃ | 6 |
| Output Current | IOUTMAX | 700 | mA | VCE=VIN, VIN=VOUT(T)+1.0V, VOUT(T)>1.5V | 5 | ||
| Load Regulation | ΔVOUT | 35 | 70 | mV | VCE=VIN, 0.1mA≦IOUT≦300mA | 6 | |
| Dropout Voltage 1 | Vdif | 160 | 260 | mV | IOUT=300mA, VCE=VIN | 6 | |
| Dropout Voltage 2 | Vdif2 | 40 | 80 | mV | IOUT=0mA, VCE=VIN | 6 | |
| Supply Current | ISS | 100 | 220 | μA | VIN=VCE=VOUT(T)+1.0V, IOUT=0mA | 5 | |
| Stand-by Current | ISTBY | 0.01 | 0.1 | μA | VIN=6.0V, VCE=VSS | 5 | |
| Line Regulation | ΔVOUT/(ΔVIN・VOUT) | 0.01 | 0.1 | %/V | VOUT(T)+0.5V≦VIN≦6.0V, VCE=VIN, IOUT=30mA | 5 | |
| Input Voltage | VIN | 1.7 | 6 | V | 5 | ||
| Output Voltage Temperature Characteristics | ΔVOUT/(ΔTa・VOUT) | -100 | 100 | ppm/℃ | VCE=VIN, IOUT=30mA, -40℃≦Ta≦85℃ | 5 | |
| Limit Current | Ilim | 720 | 950 | mA | VCE=VIN, VIN=VOUT(T)+1.0V, VOUT(T)>1.5V | 5 | |
| CE High Level Voltage | VCEH | 1.2 | 6 | V | 5 | ||
| CE Low Level Voltage | VCEL | 0.3 | V | VSS to 0.3V | 5 | ||
| CE High Level Current | ICEH | 17.7 | 24 | 36.9 | μA | VCE=VIN=6.0V, XC6227C Series | 5 |
| CE Low Level Current | ICEL | -0.1 | 0.1 | μA | VCE=VSS | 5 | |
| Reverse Current | IREV | 0.01 | 1.5 | μA | VIN=0V, VOUT=6.0V | 5 | |
| VOUT Pin Sink Current | IREVS | 2.8 | 5.3 | μA | VIN=5.0V, VOUT=6.0V | 5 | |
| Power Supply Rejection Ratio | PSRR | 65 | dB | VIN={VOUT(T)+1.0}VDC+0.5Vp-pAC, VCE=VIN, IOUT=30mA, f=1kHz | 5 | ||
| Short Current | Ishort | 55 | mA | VCE=VIN, Short VOUT to VSS level | 5 | ||
| Thermal Shutdown Detect Temperature | TTSD | 150 | ℃ | Junction Temperature | 5 | ||
| Thermal Shutdown Release Temperature | TTSR | 125 | ℃ | Junction Temperature | 5 | ||
| Input Voltage (absolute maximum) | VIN | 6.5 | V | VSS - 0.3 ~ 6.5 | 4 | ||
| Output Voltage (absolute maximum) | VOUT | 6.5 | V | VSS - 0.3 ~ 6.5 | 4 | ||
| CE Input Voltage (absolute maximum) | VCE | 6.5 | V | VSS - 0.3 ~ 6.5 | 4 | ||
| Power Dissipation SOT-25 (IC only) | Pd | 250 | mW | Ta=25℃, IC only | 4 | ||
| Power Dissipation SOT-25 (40mm x 40mm Standard Board) | Pd | 600 | mW | Ta=25℃, 40mm x 40mm Standard Board | 4 | ||
| Power Dissipation SOT-25 (JESD51-7 Board) | Pd | 760 | mW | Ta=25℃, JESD51-7 Board | 4 | ||
| Operating Ambient Temperature | Topr | -40 | 85 | ℃ | 4 | ||
| Storage Temperature | Tstg | -55 | 125 | ℃ | 4 | ||
| Output Capacitor | CL | 2.2 | μF | VOUT=2.5~5.0V, ceramic | 8 | ||
| Input Capacitor | CIN | 1 | μF | ceramic | 8 |
CAD (KiCad official)
- Symbol:
XC6227C251MR-G - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25 (KiCad packages3D, STEP)
- 3D model files:
xc6227c251mr-g-etched.step/xc6227c251mr-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xc6227c251mr-g.step/xc6227c251mr-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Torex Semicon datasheet (23 pp, sha256
03781c58b7e1bc8e, retrieved 2026-10-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# XC6227C251MR-G
**Torex Semicon** · Linear Voltage Regulators (LDO) · SOT-25
XC6227C251MR-G from Torex Semicon, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input with operating range 1.7V to 6.0V (absolute max 6.5V); connect a 1.0μF or higher ceramic input capacitor to VSS. |
| 2 | VSS | power_in | Ground pin. |
| 3 | CE | input | Active-high ON/OFF control: high level 1.2V to 6.0V enables the output, low level VSS to 0.3V places the IC in stand-by, and the C type has an internal pull-down resistor so an open pin means stand-by. |
| 4 | NC | unconnected | No connection. |
| 5 | VOUT | power_out | Regulated output (2.5V for this XC6227C251) delivering up to 700mA, requiring an output capacitor of 2.2μF or higher ceramic for phase compensation, with reverse current protection if VOUT exceeds VIN (keep external supply at 6.0V or less). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Torex Semicon |
| Package | SOT-25 |
| Category | Power Supply Chip |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT(E) | 2.475 | 2.5 | 2.525 | V | VOUT(T)=2.50V, VCE=VIN, IOUT=10mA, Ta=25℃ | 6 |
| Output Current | IOUTMAX | 700 | | | mA | VCE=VIN, VIN=VOUT(T)+1.0V, VOUT(T)>1.5V | 5 |
| Load Regulation | ΔVOUT | | 35 | 70 | mV | VCE=VIN, 0.1mA≦IOUT≦300mA | 6 |
| Dropout Voltage 1 | Vdif | | 160 | 260 | mV | IOUT=300mA, VCE=VIN | 6 |
| Dropout Voltage 2 | Vdif2 | | 40 | 80 | mV | IOUT=0mA, VCE=VIN | 6 |
| Supply Current | ISS | | 100 | 220 | μA | VIN=VCE=VOUT(T)+1.0V, IOUT=0mA | 5 |
| Stand-by Current | ISTBY | | 0.01 | 0.1 | μA | VIN=6.0V, VCE=VSS | 5 |
| Line Regulation | ΔVOUT/(ΔVIN・VOUT) | | 0.01 | 0.1 | %/V | VOUT(T)+0.5V≦VIN≦6.0V, VCE=VIN, IOUT=30mA | 5 |
| Input Voltage | VIN | 1.7 | | 6 | V | | 5 |
| Output Voltage Temperature Characteristics | ΔVOUT/(ΔTa・VOUT) | -100 | | 100 | ppm/℃ | VCE=VIN, IOUT=30mA, -40℃≦Ta≦85℃ | 5 |
| Limit Current | Ilim | 720 | 950 | | mA | VCE=VIN, VIN=VOUT(T)+1.0V, VOUT(T)>1.5V | 5 |
| CE High Level Voltage | VCEH | 1.2 | | 6 | V | | 5 |
| CE Low Level Voltage | VCEL | | | 0.3 | V | VSS to 0.3V | 5 |
| CE High Level Current | ICEH | 17.7 | 24 | 36.9 | μA | VCE=VIN=6.0V, XC6227C Series | 5 |
| CE Low Level Current | ICEL | -0.1 | | 0.1 | μA | VCE=VSS | 5 |
| Reverse Current | IREV | | 0.01 | 1.5 | μA | VIN=0V, VOUT=6.0V | 5 |
| VOUT Pin Sink Current | IREVS | | 2.8 | 5.3 | μA | VIN=5.0V, VOUT=6.0V | 5 |
| Power Supply Rejection Ratio | PSRR | | 65 | | dB | VIN={VOUT(T)+1.0}VDC+0.5Vp-pAC, VCE=VIN, IOUT=30mA, f=1kHz | 5 |
| Short Current | Ishort | | 55 | | mA | VCE=VIN, Short VOUT to VSS level | 5 |
| Thermal Shutdown Detect Temperature | TTSD | | 150 | | ℃ | Junction Temperature | 5 |
| Thermal Shutdown Release Temperature | TTSR | | 125 | | ℃ | Junction Temperature | 5 |
| Input Voltage (absolute maximum) | VIN | | | 6.5 | V | VSS - 0.3 ~ 6.5 | 4 |
| Output Voltage (absolute maximum) | VOUT | | | 6.5 | V | VSS - 0.3 ~ 6.5 | 4 |
| CE Input Voltage (absolute maximum) | VCE | | | 6.5 | V | VSS - 0.3 ~ 6.5 | 4 |
| Power Dissipation SOT-25 (IC only) | Pd | | | 250 | mW | Ta=25℃, IC only | 4 |
| Power Dissipation SOT-25 (40mm x 40mm Standard Board) | Pd | | | 600 | mW | Ta=25℃, 40mm x 40mm Standard Board | 4 |
| Power Dissipation SOT-25 (JESD51-7 Board) | Pd | | | 760 | mW | Ta=25℃, JESD51-7 Board | 4 |
| Operating Ambient Temperature | Topr | -40 | | 85 | ℃ | | 4 |
| Storage Temperature | Tstg | -55 | | 125 | ℃ | | 4 |
| Output Capacitor | CL | 2.2 | | | μF | VOUT=2.5~5.0V, ceramic | 8 |
| Input Capacitor | CIN | 1 | | | μF | ceramic | 8 |
## CAD (KiCad official)
- Symbol: `XC6227C251MR-G`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-25 (KiCad packages3D, STEP)
- 3D model files: `xc6227c251mr-g-etched.step` / `xc6227c251mr-g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xc6227c251mr-g.step` / `xc6227c251mr-g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Torex Semicon datasheet](docs/xc6227c251mr-g-datasheet.pdf) (23 pp, sha256 `03781c58b7e1bc8e`, retrieved 2026-10-26, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/xc6227c251mr-g-datasheet.pdf)