main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers xc6227c251mr-g: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
xc6227c251mr-g-etched.glb Publish 0.1.0 · Ray
xc6227c251mr-g-etched.step xc6227c251mr-g: factory component page (tier=lcsc) · Ray
xc6227c251mr-g-hero.glb xc6227c251mr-g: hero GLB from the etched model (keeps the MPN mark) · Ray
xc6227c251mr-g-hero.overlay.json Publish 0.1.0 · Ray
xc6227c251mr-g.glb Publish 0.1.0 · Ray
xc6227c251mr-g.kicad_mod Publish 0.1.0 · Ray
xc6227c251mr-g.kicad_sym Publish 0.1.0 · Ray
xc6227c251mr-g.lbr Publish 0.1.0 · Ray
xc6227c251mr-g.step Publish 0.1.0 · Ray

XC6227C251MR-G

Torex Semicon · Linear Voltage Regulators (LDO) · SOT-25

XC6227C251MR-G from Torex Semicon, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Power input with operating range 1.7V to 6.0V (absolute max 6.5V); connect a 1.0μF or higher ceramic input capacitor to VSS.
2 VSS power_in Ground pin.
3 CE input Active-high ON/OFF control: high level 1.2V to 6.0V enables the output, low level VSS to 0.3V places the IC in stand-by, and the C type has an internal pull-down resistor so an open pin means stand-by.
4 NC unconnected No connection.
5 VOUT power_out Regulated output (2.5V for this XC6227C251) delivering up to 700mA, requiring an output capacitor of 2.2μF or higher ceramic for phase compensation, with reverse current protection if VOUT exceeds VIN (keep external supply at 6.0V or less).

Key specifications

Parameter Value
Manufacturer Torex Semicon
Package SOT-25
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage VOUT(E) 2.475 2.5 2.525 V VOUT(T)=2.50V, VCE=VIN, IOUT=10mA, Ta=25℃ 6
Output Current IOUTMAX 700 mA VCE=VIN, VIN=VOUT(T)+1.0V, VOUT(T)>1.5V 5
Load Regulation ΔVOUT 35 70 mV VCE=VIN, 0.1mA≦IOUT≦300mA 6
Dropout Voltage 1 Vdif 160 260 mV IOUT=300mA, VCE=VIN 6
Dropout Voltage 2 Vdif2 40 80 mV IOUT=0mA, VCE=VIN 6
Supply Current ISS 100 220 μA VIN=VCE=VOUT(T)+1.0V, IOUT=0mA 5
Stand-by Current ISTBY 0.01 0.1 μA VIN=6.0V, VCE=VSS 5
Line Regulation ΔVOUT/(ΔVIN・VOUT) 0.01 0.1 %/V VOUT(T)+0.5V≦VIN≦6.0V, VCE=VIN, IOUT=30mA 5
Input Voltage VIN 1.7 6 V 5
Output Voltage Temperature Characteristics ΔVOUT/(ΔTa・VOUT) -100 100 ppm/℃ VCE=VIN, IOUT=30mA, -40℃≦Ta≦85℃ 5
Limit Current Ilim 720 950 mA VCE=VIN, VIN=VOUT(T)+1.0V, VOUT(T)>1.5V 5
CE High Level Voltage VCEH 1.2 6 V 5
CE Low Level Voltage VCEL 0.3 V VSS to 0.3V 5
CE High Level Current ICEH 17.7 24 36.9 μA VCE=VIN=6.0V, XC6227C Series 5
CE Low Level Current ICEL -0.1 0.1 μA VCE=VSS 5
Reverse Current IREV 0.01 1.5 μA VIN=0V, VOUT=6.0V 5
VOUT Pin Sink Current IREVS 2.8 5.3 μA VIN=5.0V, VOUT=6.0V 5
Power Supply Rejection Ratio PSRR 65 dB VIN={VOUT(T)+1.0}VDC+0.5Vp-pAC, VCE=VIN, IOUT=30mA, f=1kHz 5
Short Current Ishort 55 mA VCE=VIN, Short VOUT to VSS level 5
Thermal Shutdown Detect Temperature TTSD 150 ℃ Junction Temperature 5
Thermal Shutdown Release Temperature TTSR 125 ℃ Junction Temperature 5
Input Voltage (absolute maximum) VIN 6.5 V VSS - 0.3 ~ 6.5 4
Output Voltage (absolute maximum) VOUT 6.5 V VSS - 0.3 ~ 6.5 4
CE Input Voltage (absolute maximum) VCE 6.5 V VSS - 0.3 ~ 6.5 4
Power Dissipation SOT-25 (IC only) Pd 250 mW Ta=25℃, IC only 4
Power Dissipation SOT-25 (40mm x 40mm Standard Board) Pd 600 mW Ta=25℃, 40mm x 40mm Standard Board 4
Power Dissipation SOT-25 (JESD51-7 Board) Pd 760 mW Ta=25℃, JESD51-7 Board 4
Operating Ambient Temperature Topr -40 85 ℃ 4
Storage Temperature Tstg -55 125 ℃ 4
Output Capacitor CL 2.2 μF VOUT=2.5~5.0V, ceramic 8
Input Capacitor CIN 1 μF ceramic 8

CAD (KiCad official)

  • Symbol: XC6227C251MR-G
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-25 (KiCad packages3D, STEP)
  • 3D model files: xc6227c251mr-g-etched.step / xc6227c251mr-g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xc6227c251mr-g.step / xc6227c251mr-g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Torex Semicon datasheet (23 pp, sha256 03781c58b7e1bc8e, retrieved 2026-10-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF