main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers xc6209b302mr-g: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
xc6209b302mr-g-etched.glb Publish 0.1.0 · Ray
xc6209b302mr-g-etched.step xc6209b302mr-g: factory component page (tier=lcsc) · Ray
xc6209b302mr-g-hero.glb xc6209b302mr-g: hero GLB from the etched model (keeps the MPN mark) · Ray
xc6209b302mr-g-hero.overlay.json Publish 0.1.0 · Ray
xc6209b302mr-g.glb Publish 0.1.0 · Ray
xc6209b302mr-g.kicad_mod Publish 0.1.0 · Ray
xc6209b302mr-g.kicad_sym Publish 0.1.0 · Ray
xc6209b302mr-g.lbr Publish 0.1.0 · Ray
xc6209b302mr-g.step Publish 0.1.0 · Ray

XC6209B302MR-G

Torex Semicon · Linear Voltage Regulators (LDO) · SOT-25

XC6209B302MR-G from Torex Semicon, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Power input with operating input voltage range of 2V to 10V (absolute maximum 12.0V); connect a 1μF input capacitor between VIN and VSS.
2 VSS power_in Ground pin, reference for all voltages; the output capacitor of at least 1μF should be connected close to VOUT and VSS.
3 CE input ON/OFF control input; for Type B (active high, no pull-down) VCE high of 1.6V to VIN turns the output on and 0.25V max turns it off, and the pin must not be left open.
4 NC unconnected No connection.
5 VOUT power_out Regulated output, 3.0V nominal for the XC6209B302 with ±2% accuracy, 150mA maximum output current, requiring an output capacitor of at least 1μF.

Key specifications

Parameter Value
Manufacturer Torex Semicon
Package SOT-25
Category Power Management
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage (2%) VOUT(E) 2.94 3 3.06 V IOUT=30mA 10
Maximum Output Current IOUTMAX 150 mA 6
Load Regulation ΔVOUT 15 50 mV 1mA≦IOUT≦100mA 6
Dropout Voltage 1 Vdif1 60 90 mV IOUT=30mA 10
Dropout Voltage 2 Vdif2 200 250 mV IOUT=100mA 10
Supply Current (Type B) IDD 25 50 μA VCE=VIN=VOUT(T)+1.0V 6
Stand-by Current ISTB 0.01 0.1 μA VIN=VOUT(T)+1.0V, VCE=VSS 6
Line Regulation ΔVOUT/(ΔVIN·VOUT) 0.01 0.2 %/V VOUT(T)+1.0V≦VIN≦10V, IOUT=30mA 6
Input Voltage VIN 2 10 V 6
CE High Level Voltage VCEH 1.6 V max is VIN 6
CE Low Level Voltage VCEL 0.25 V 6
CE High Level Current (Type B) ICEH -0.1 0.1 μA VIN=VCE=VOUT(T)+1.0V 6
CE Low Level Current ICEL -0.1 0.1 μA VIN=VOUT(T)+1.0V, VCE=VSS 6
Output Voltage Temperature Characteristics ΔVOUT/(ΔTopr·VOUT) 100 ppm/℃ IOUT=30mA, -40℃≦Topr≦85℃ 6
Power Supply Rejection Ratio PSRR 70 dB IOUT=50mA, f=10kHz 6
Current Limit Ilim 300 mA VIN=VOUT(T)+1.0V, VCE=VSS 6
Short Current ISHORT 50 mA VIN=VOUT(T)+1.0V, VCE=VSS 6
Input Voltage VIN 12 V Ta=25℃ 5
Output Current IOUT 500 mA IOUT≦Pd/(VIN-VOUT) 5
Output Voltage VOUT -0.3 0.3 V VSS - 0.3 ~ VIN + 0.3 V (max relative to VIN) 5
CE Input Voltage VCE -0.3 0.3 V VSS - 0.3 ~ VIN + 0.3 V (max relative to VIN) 5
Power Dissipation SOT-25 Pd 250 mW Ta=25℃ 5
Power Dissipation SOT-25 (PCB mounted) Pd 600 mW PCB mounted, reference data 5
Operating Ambient Temperature Topr -40 85 ℃ 5
Storage Temperature Tstg -55 125 ℃ 5
Thermal Resistance SOT-25 166.67 ℃/W Mounted on 40×40mm board 25

CAD (KiCad official)

  • Symbol: XC6209B302MR-G
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-25 (KiCad packages3D, STEP)
  • 3D model files: xc6209b302mr-g-etched.step / xc6209b302mr-g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xc6209b302mr-g.step / xc6209b302mr-g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Torex Semicon datasheet (30 pp, sha256 c8d4c88259ea584e, retrieved 2026-10-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF