3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXC6209B302MR-G
Torex Semicon · Linear Voltage Regulators (LDO) · SOT-25
XC6209B302MR-G from Torex Semicon, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input with operating input voltage range of 2V to 10V (absolute maximum 12.0V); connect a 1μF input capacitor between VIN and VSS. |
| 2 | VSS | power_in | Ground pin, reference for all voltages; the output capacitor of at least 1μF should be connected close to VOUT and VSS. |
| 3 | CE | input | ON/OFF control input; for Type B (active high, no pull-down) VCE high of 1.6V to VIN turns the output on and 0.25V max turns it off, and the pin must not be left open. |
| 4 | NC | unconnected | No connection. |
| 5 | VOUT | power_out | Regulated output, 3.0V nominal for the XC6209B302 with ±2% accuracy, 150mA maximum output current, requiring an output capacitor of at least 1μF. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Torex Semicon |
| Package | SOT-25 |
| Category | Power Management |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (2%) | VOUT(E) | 2.94 | 3 | 3.06 | V | IOUT=30mA | 10 |
| Maximum Output Current | IOUTMAX | 150 | mA | 6 | |||
| Load Regulation | ΔVOUT | 15 | 50 | mV | 1mA≦IOUT≦100mA | 6 | |
| Dropout Voltage 1 | Vdif1 | 60 | 90 | mV | IOUT=30mA | 10 | |
| Dropout Voltage 2 | Vdif2 | 200 | 250 | mV | IOUT=100mA | 10 | |
| Supply Current (Type B) | IDD | 25 | 50 | μA | VCE=VIN=VOUT(T)+1.0V | 6 | |
| Stand-by Current | ISTB | 0.01 | 0.1 | μA | VIN=VOUT(T)+1.0V, VCE=VSS | 6 | |
| Line Regulation | ΔVOUT/(ΔVIN·VOUT) | 0.01 | 0.2 | %/V | VOUT(T)+1.0V≦VIN≦10V, IOUT=30mA | 6 | |
| Input Voltage | VIN | 2 | 10 | V | 6 | ||
| CE High Level Voltage | VCEH | 1.6 | V | max is VIN | 6 | ||
| CE Low Level Voltage | VCEL | 0.25 | V | 6 | |||
| CE High Level Current (Type B) | ICEH | -0.1 | 0.1 | μA | VIN=VCE=VOUT(T)+1.0V | 6 | |
| CE Low Level Current | ICEL | -0.1 | 0.1 | μA | VIN=VOUT(T)+1.0V, VCE=VSS | 6 | |
| Output Voltage Temperature Characteristics | ΔVOUT/(ΔTopr·VOUT) | 100 | ppm/℃ | IOUT=30mA, -40℃≦Topr≦85℃ | 6 | ||
| Power Supply Rejection Ratio | PSRR | 70 | dB | IOUT=50mA, f=10kHz | 6 | ||
| Current Limit | Ilim | 300 | mA | VIN=VOUT(T)+1.0V, VCE=VSS | 6 | ||
| Short Current | ISHORT | 50 | mA | VIN=VOUT(T)+1.0V, VCE=VSS | 6 | ||
| Input Voltage | VIN | 12 | V | Ta=25℃ | 5 | ||
| Output Current | IOUT | 500 | mA | IOUT≦Pd/(VIN-VOUT) | 5 | ||
| Output Voltage | VOUT | -0.3 | 0.3 | V | VSS - 0.3 ~ VIN + 0.3 V (max relative to VIN) | 5 | |
| CE Input Voltage | VCE | -0.3 | 0.3 | V | VSS - 0.3 ~ VIN + 0.3 V (max relative to VIN) | 5 | |
| Power Dissipation SOT-25 | Pd | 250 | mW | Ta=25℃ | 5 | ||
| Power Dissipation SOT-25 (PCB mounted) | Pd | 600 | mW | PCB mounted, reference data | 5 | ||
| Operating Ambient Temperature | Topr | -40 | 85 | ℃ | 5 | ||
| Storage Temperature | Tstg | -55 | 125 | ℃ | 5 | ||
| Thermal Resistance SOT-25 | 166.67 | ℃/W | Mounted on 40×40mm board | 25 |
CAD (KiCad official)
- Symbol:
XC6209B302MR-G - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25 (KiCad packages3D, STEP)
- 3D model files:
xc6209b302mr-g-etched.step/xc6209b302mr-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xc6209b302mr-g.step/xc6209b302mr-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Torex Semicon datasheet (30 pp, sha256
c8d4c88259ea584e, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).