XC2365

{
  "slug": "xc2365",
  "version": "0.1.0",
  "type": "component",
  "description": "Si Change Analog To Digital Converters (ADC), SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "data acquisition",
    "xc2365",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "xc2365.kicad_sym",
    "xc2365.kicad_mod",
    "xc2365.glb",
    "xc2365.step",
    "xc2365.lbr",
    "docs/hero.png",
    "docs/xc2365-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "xc2365-hero.glb",
    "xc2365-hero.overlay.json",
    "xc2365-etched.glb"
  ],
  "component": {
    "mpn": "XC2365",
    "manufacturer": "Si Change",
    "package": "SOT-23-6",
    "pin_count": 6,
    "category": "Data Acquisition",
    "subcategory": "Analog To Digital Converters (ADC)",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603387069410521088",
    "parts": {
      "symbol": "xc2365.kicad_sym",
      "footprint": "xc2365.kicad_mod",
      "model_3d": "xc2365-hero.glb",
      "model_3d_plain": "xc2365-etched.glb",
      "model_3d_step": "xc2365-etched.step",
      "model_3d_step_plain": "xc2365.step",
      "lbr": "xc2365.lbr"
    },
    "distributor_links": {
      "lcsc": "C23377960"
    },
    "distributor_check": {
      "checked_at": "2026-10-17T19:51:56Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VDD",
        "type": "power_in",
        "description": "Power supply input; the datasheet specifies a single supply of 4 V to 5.25 V and requires a 1 µF and a 10 nF decoupling capacitor between VDD and GND placed as close to the pins as possible."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Analog input signal ground, to which all analog and digital signals are referenced."
      },
      {
        "number": "3",
        "name": "AIN",
        "type": "input",
        "description": "Unipolar single-ended analog signal input with an input range of 0 V to VDD."
      },
      {
        "number": "4",
        "name": "SCK",
        "type": "input",
        "description": "Serial clock input that synchronizes serial data transfer."
      },
      {
        "number": "5",
        "name": "SDO",
        "type": "tri_state",
        "description": "Serial data output for the conversion result, transmitted MSB first; per the timing section, the pin goes to high impedance after the three leading zeros and 12-bit result are output."
      },
      {
        "number": "6",
        "name": "CS",
        "type": "input",
        "description": "Active-low chip select that strobes SCK, starts a conversion, and frames the output data."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin table on page 2 is text-extracted; the pin-assignment diagram (pin 1 position and orientatio; SDO is typed tri_state because the timing section says it enters high impedance after the output seq; GND is typed power_in per the instruction for ground pins; the datasheet calls it the analog input s"
        ],
        "pages_sent": 4,
        "cost_usd": 0.0258,
        "at": "2026-10-17T19:49:42"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603387069410521088",
        "pages": 4,
        "sha256": "6deedb82ade31cf5",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "xc2365.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "xc2365-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "75572d474564d01e4b7f87514ca2bbb994fe0e4ca3cbf1466f8d24cddab67c8f",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}