component
XC2365
Public Made by Adomby adom
Si Change Analog To Digital Converters (ADC), SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 8d ago |
| viewers | 8d ago |
| package.json | 8d ago |
| page.json | 8d ago |
| README.md | 8d ago |
| xc2365-etched.glb | 8d ago |
| xc2365-etched.step | 8d ago |
| xc2365-hero.glb | 8d ago |
| xc2365-hero.overlay.json | 8d ago |
| xc2365.glb | 8d ago |
| xc2365.kicad_mod | 8d ago |
| xc2365.kicad_sym | 8d ago |
| xc2365.lbr | 8d ago |
| xc2365.step | 8d ago |
XC2365
Si Change · Analog To Digital Converters (ADC) · SOT-23-6
XC2365 from Si Change, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply input; the datasheet specifies a single supply of 4 V to 5.25 V and requires a 1 µF and a 10 nF decoupling capacitor between VDD and GND placed as close to the pins as possible. |
| 2 | GND | power_in | Analog input signal ground, to which all analog and digital signals are referenced. |
| 3 | AIN | input | Unipolar single-ended analog signal input with an input range of 0 V to VDD. |
| 4 | SCK | input | Serial clock input that synchronizes serial data transfer. |
| 5 | SDO | tri_state | Serial data output for the conversion result, transmitted MSB first; per the timing section, the pin goes to high impedance after the three leading zeros and 12-bit result are output. |
| 6 | CS | input | Active-low chip select that strobes SCK, starts a conversion, and frames the output data. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Si Change |
| Package | SOT-23-6 |
| Category | Data Acquisition |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (single supply) | 4 | 5.25 | V | 单电源供电 | 2 | ||
| Operating temperature range | -40 | 85 | °C | 工作温度范围 | 1 | ||
| Maximum sampling rate | 800 | KSPS | 2 | ||||
| Differential nonlinearity (DNL) | -1 | 1 | LSB | 2 | |||
| Integral nonlinearity (INL) | -1 | 1 | LSB | 2 | |||
| Power consumption (typical) | 3.4 | mW | 4V，800 KSPS | 2 | |||
| Power consumption (typical) | 5.95 | mW | 5V，800 KSPS | 2 | |||
| Signal-to-noise and distortion (SNR) | 72.5 | dB | @100 KHz | 2 | |||
| Total harmonic distortion (THD) | -85 | dB | @100 KHz | 2 | |||
| Resolution | 12 | bit | 无失码 | 2 |
CAD (KiCad official)
- Symbol:
XC2365 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
xc2365-etched.step/xc2365-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xc2365.step/xc2365.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Si Change datasheet (4 pp, sha256
6deedb82ade31cf5, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).