component
XC081S101
Public Made by Adomby adom
Si Change Analog To Digital Converters (ADC), SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXC081S101
Si Change · Analog To Digital Converters (ADC) · SOT-23-6
XC081S101 from Si Change, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VA | power_in | Power supply input, operated from a single 4 V to 5.25 V supply and decoupled to GND with a 1 µF and 10 nF capacitor placed as close to the pins as possible. |
| 2 | GND | power_in | Ground for the power supply; all analog and digital signals are referred to this pin. |
| 3 | VIN | power_in | Analog input that can range from 0 V to VA, and VA should be kept greater than or equal to the maximum input signal to avoid code saturation. |
| 4 | SCLK | input | Digital clock input that directly controls the conversion and readout processes. |
| 5 | SDATA | output | Digital data output; output samples are clocked out on the falling edges of SCLK and the pin returns to tri-state once the data transfer is complete. |
| 6 | CS | input | Chip select; a conversion process begins on the falling edge of CS, and the device powers down if CS goes high before the 10th SCLK falling edge. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Si Change |
| Package | SOT-23-6 |
| Category | Data Acquisition |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Integral linearity | -0.5 | 0.5 | LSB | 2 | |||
| Differential linearity | -0.5 | 0.5 | LSB | 2 | |||
| Throughput rate | fSAMPLE | 500 | 800 | KSPS | fSCLK = 16 MHz, 4 V ≤ VDD ≤ 5.25 V | 2 | |
| Supply current, normal operation (fSAMPLE = 800 KSPS, VDD = 4 V) | IDD | 0.74 | 0.88 | mA | Digital inputs = 0 V or VDD; fSAMPLE = 800 KSPS, fSCLK = 16 MHz, VDD = 4 V | 2 | |
| Supply current, normal operation (fSAMPLE = 800 KSPS, VDD = 5 V) | IDD | 1.02 | 1.25 | mA | Digital inputs = 0 V or VDD; fSAMPLE = 800 KSPS, fSCLK = 16 MHz, VDD = 5 V | 2 | |
| Supply current, normal operation (fSAMPLE = 500 KSPS, VDD = 4 V) | IDD | 0.45 | 0.45 | mA | Digital inputs = 0 V or VDD; fSAMPLE = 500 KSPS, fSCLK = 10 MHz, VDD = 4 V | 2 | |
| Supply current, normal operation (fSAMPLE = 500 KSPS, VDD = 5 V) | IDD | 0.75 | 0.9 | mA | Digital inputs = 0 V or VDD; fSAMPLE = 500 KSPS, fSCLK = 10 MHz, VDD = 5 V | 2 | |
| Resolution | 8 | Bits | 2 | ||||
| No missing codes | 8 | Bits | 2 | ||||
| Signal-to-noise ratio (SNR) | SNR | 49 | dB | fIN = 100 kHz | 2 | ||
| Total harmonic distortion (THD) | THD | -68 | dB | fIN = 100 kHz | 2 | ||
| Supply voltage (single supply, fully specified range) | VDD | 4 | 5.25 | V | Stated in description and spec header text, not a table row | 1 | |
| Operating temperature range | -40 | 85 | °C | Stated in description text, not a table row | 1 |
CAD (KiCad official)
- Symbol:
XC081S101 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
xc081s101-etched.step/xc081s101-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xc081s101.step/xc081s101.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Si Change datasheet (5 pp, sha256
a88714fc55c67cb3, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).