main
Ray
Publish 0.1.0
c2381ed
XB5332B
XySemi · Battery Management ICs · SOT-23-5
XB5332B from XySemi, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VT | passive | Test pin, only for vendor use and not used by the application. |
| 2 | GND | power_in | Ground; connect the negative terminal of the battery to this pin. |
| 3 | VDD | power_in | Power supply pin for the device. |
| 4 | VM | passive | Negative terminal of the battery pack; the internal FET switch connects this terminal to GND. |
| 5 | VM | passive | Negative terminal of the battery pack; the internal FET switch connects this terminal to GND (datasheet lists pins 4 and 5 together as VM). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XySemi |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Overcharge Voltage Detection Tolerance | VCU | -50 | 50 | mV | 2 | ||
| Overcharge Release Voltage Tolerance | VCL | -50 | 50 | mV | 2 | ||
| Overdischarge Voltage Detection Tolerance | VDL | -100 | 100 | mV | 2 | ||
| Overdischarge Release Voltage Tolerance | VDR | -100 | 100 | mV | 2 | ||
| Overdischarge Current Detection | IIOV1 | 2.5 | 3.3 | 4.1 | A | VDD=3.6V | 4 |
| Overcharge Current Detection | ICHOC | 2.5 | 3.3 | 4.1 | A | VDD=3.6V | 4 |
| Load Short-Circuiting Detection | ISHORT | 10 | 20 | 30 | A | VDD=3.6V | 4 |
| Current Consumption in Normal Operation | IOPE | 2.8 | 6 | µA | VDD=3.6V, VM pin floating | 4 | |
| Current Consumption in Power Down | IPD | 1.5 | 3 | µA | VDD=2.0V, VM pin floating | 4 | |
| Internal Resistance between VM and VDD | RVMD | 200 | 300 | 400 | kΩ | VDD=3.6V, VM=1.0V | 4 |
| Internal Resistance between VM and GND | RVMS | 10 | 20 | 30 | kΩ | VDD=3.6V, VM pin floating | 4 |
| Equivalent FET on Resistance | RSS(ON) | 62 | 74 | mΩ | VDD=3.6V, IVM=1.0A | 4 | |
| Overcharge Voltage Detection Delay Time | tCU | 80 | 130 | 180 | mS | 4 | |
| Overdischarge Voltage Detection Delay Time | tDL | 20 | 40 | 60 | mS | 4 | |
| Overdischarge Current1 Detection Delay Time | tIOV1 | 4 | 7.5 | 16 | mS | VDD=3.6V | 4 |
| Load Short-Circuiting Detection Delay Time | tSHORT | 80 | 180 | 300 | µS | VDD=3.6V | 4 |
| VDD input pin voltage | -0.3 | 6 | V | 3 | |||
| VM input pin voltage | -6 | 10 | V | 3 | |||
| Operating Ambient Temperature | -40 | 85 | °C | 3 | |||
| Maximum Junction Temperature | 125 | °C | 3 | ||||
| Storage Temperature | -55 | 150 | °C | 3 | |||
| Lead Temperature (Soldering) | 300 | °C | Soldering, 10 sec | 3 | |||
| Power Dissipation | 0.4 | W | T=25°C | 3 | |||
| HBM ESD | 2000 | V | HBM | 3 | |||
| Package Thermal Resistance (Junction to Ambient) | θJA | 250 | °C/W | Junction to ambient | 3 | ||
| Package Thermal Resistance (Junction to Case) | θJC | 130 | °C/W | Junction to case | 3 | ||
| Overcharge Detection Voltage (nominal) | VCU | 4.3 | V | 2 | |||
| Overcharge Release Voltage (nominal) | VCL | 4.1 | V | 2 | |||
| Overdischarge Detection Voltage (nominal) | VDL | 2.9 | V | 2 | |||
| Overdischarge Release Voltage (nominal) | VDR | 3 | V | 2 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
XB5332B - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.92 mm, terminals on the pads, 1.1 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
xb5332b-etched.step/xb5332b-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xb5332b.step/xb5332b.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XySemi datasheet (10 pp, sha256
99897ce16c59eb41, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# XB5332B
**XySemi** · Battery Management ICs · SOT-23-5
XB5332B from XySemi, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VT | passive | Test pin, only for vendor use and not used by the application. |
| 2 | GND | power_in | Ground; connect the negative terminal of the battery to this pin. |
| 3 | VDD | power_in | Power supply pin for the device. |
| 4 | VM | passive | Negative terminal of the battery pack; the internal FET switch connects this terminal to GND. |
| 5 | VM | passive | Negative terminal of the battery pack; the internal FET switch connects this terminal to GND (datasheet lists pins 4 and 5 together as VM). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XySemi |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Overcharge Voltage Detection Tolerance | VCU | -50 | | 50 | mV | | 2 |
| Overcharge Release Voltage Tolerance | VCL | -50 | | 50 | mV | | 2 |
| Overdischarge Voltage Detection Tolerance | VDL | -100 | | 100 | mV | | 2 |
| Overdischarge Release Voltage Tolerance | VDR | -100 | | 100 | mV | | 2 |
| Overdischarge Current Detection | IIOV1 | 2.5 | 3.3 | 4.1 | A | VDD=3.6V | 4 |
| Overcharge Current Detection | ICHOC | 2.5 | 3.3 | 4.1 | A | VDD=3.6V | 4 |
| Load Short-Circuiting Detection | ISHORT | 10 | 20 | 30 | A | VDD=3.6V | 4 |
| Current Consumption in Normal Operation | IOPE | | 2.8 | 6 | µA | VDD=3.6V, VM pin floating | 4 |
| Current Consumption in Power Down | IPD | | 1.5 | 3 | µA | VDD=2.0V, VM pin floating | 4 |
| Internal Resistance between VM and VDD | RVMD | 200 | 300 | 400 | kΩ | VDD=3.6V, VM=1.0V | 4 |
| Internal Resistance between VM and GND | RVMS | 10 | 20 | 30 | kΩ | VDD=3.6V, VM pin floating | 4 |
| Equivalent FET on Resistance | RSS(ON) | | 62 | 74 | mΩ | VDD=3.6V, IVM=1.0A | 4 |
| Overcharge Voltage Detection Delay Time | tCU | 80 | 130 | 180 | mS | | 4 |
| Overdischarge Voltage Detection Delay Time | tDL | 20 | 40 | 60 | mS | | 4 |
| Overdischarge Current1 Detection Delay Time | tIOV1 | 4 | 7.5 | 16 | mS | VDD=3.6V | 4 |
| Load Short-Circuiting Detection Delay Time | tSHORT | 80 | 180 | 300 | µS | VDD=3.6V | 4 |
| VDD input pin voltage | | -0.3 | | 6 | V | | 3 |
| VM input pin voltage | | -6 | | 10 | V | | 3 |
| Operating Ambient Temperature | | -40 | | 85 | °C | | 3 |
| Maximum Junction Temperature | | | | 125 | °C | | 3 |
| Storage Temperature | | -55 | | 150 | °C | | 3 |
| Lead Temperature (Soldering) | | | | 300 | °C | Soldering, 10 sec | 3 |
| Power Dissipation | | | | 0.4 | W | T=25°C | 3 |
| HBM ESD | | | | 2000 | V | HBM | 3 |
| Package Thermal Resistance (Junction to Ambient) | θJA | | 250 | | °C/W | Junction to ambient | 3 |
| Package Thermal Resistance (Junction to Case) | θJC | | 130 | | °C/W | Junction to case | 3 |
| Overcharge Detection Voltage (nominal) | VCU | | 4.3 | | V | | 2 |
| Overcharge Release Voltage (nominal) | VCL | | 4.1 | | V | | 2 |
| Overdischarge Detection Voltage (nominal) | VDL | | 2.9 | | V | | 2 |
| Overdischarge Release Voltage (nominal) | VDR | | 3 | | V | | 2 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `XB5332B`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.92 mm, terminals on the pads, 1.1 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `xb5332b-etched.step` / `xb5332b-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xb5332b.step` / `xb5332b.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [XySemi datasheet](docs/xb5332b-datasheet.pdf) (10 pp, sha256 `99897ce16c59eb41`, retrieved 2026-11-13, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/xb5332b-datasheet.pdf)