Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

XB5332B

XySemi · Battery Management ICs · SOT-23-5

XB5332B from XySemi, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VT passive Test pin, only for vendor use and not used by the application.
2 GND power_in Ground; connect the negative terminal of the battery to this pin.
3 VDD power_in Power supply pin for the device.
4 VM passive Negative terminal of the battery pack; the internal FET switch connects this terminal to GND.
5 VM passive Negative terminal of the battery pack; the internal FET switch connects this terminal to GND (datasheet lists pins 4 and 5 together as VM).

Key specifications

Parameter Value
Manufacturer XySemi
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Overcharge Voltage Detection Tolerance VCU -50 50 mV 2
Overcharge Release Voltage Tolerance VCL -50 50 mV 2
Overdischarge Voltage Detection Tolerance VDL -100 100 mV 2
Overdischarge Release Voltage Tolerance VDR -100 100 mV 2
Overdischarge Current Detection IIOV1 2.5 3.3 4.1 A VDD=3.6V 4
Overcharge Current Detection ICHOC 2.5 3.3 4.1 A VDD=3.6V 4
Load Short-Circuiting Detection ISHORT 10 20 30 A VDD=3.6V 4
Current Consumption in Normal Operation IOPE 2.8 6 µA VDD=3.6V, VM pin floating 4
Current Consumption in Power Down IPD 1.5 3 µA VDD=2.0V, VM pin floating 4
Internal Resistance between VM and VDD RVMD 200 300 400 kΩ VDD=3.6V, VM=1.0V 4
Internal Resistance between VM and GND RVMS 10 20 30 kΩ VDD=3.6V, VM pin floating 4
Equivalent FET on Resistance RSS(ON) 62 74 mΩ VDD=3.6V, IVM=1.0A 4
Overcharge Voltage Detection Delay Time tCU 80 130 180 mS 4
Overdischarge Voltage Detection Delay Time tDL 20 40 60 mS 4
Overdischarge Current1 Detection Delay Time tIOV1 4 7.5 16 mS VDD=3.6V 4
Load Short-Circuiting Detection Delay Time tSHORT 80 180 300 µS VDD=3.6V 4
VDD input pin voltage -0.3 6 V 3
VM input pin voltage -6 10 V 3
Operating Ambient Temperature -40 85 °C 3
Maximum Junction Temperature 125 °C 3
Storage Temperature -55 150 °C 3
Lead Temperature (Soldering) 300 °C Soldering, 10 sec 3
Power Dissipation 0.4 W T=25°C 3
HBM ESD 2000 V HBM 3
Package Thermal Resistance (Junction to Ambient) θJA 250 °C/W Junction to ambient 3
Package Thermal Resistance (Junction to Case) θJC 130 °C/W Junction to case 3
Overcharge Detection Voltage (nominal) VCU 4.3 V 2
Overcharge Release Voltage (nominal) VCL 4.1 V 2
Overdischarge Detection Voltage (nominal) VDL 2.9 V 2
Overdischarge Release Voltage (nominal) VDR 3 V 2

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: XB5332B
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.92 mm, terminals on the pads, 1.1 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: xb5332b-etched.step / xb5332b-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xb5332b.step / xb5332b.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: XySemi datasheet (10 pp, sha256 99897ce16c59eb41, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF