main
Ray
Publish 0.1.0
f030b63
XAL6060-223MEB
Coilcraft · Power Inductors - SMD · L_Coilcraft_XAL6060-XXX
XAL6060-223MEB from Coilcraft, in a L_Coilcraft_XAL6060-XXX. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Start (short) lead: the terminal beside Coilcraft's top-side dash mark. Connect the high dv/dt node (switch node) here for lowest EMI. |
| 2 | 2 | passive | Finish terminal (the side away from the dash mark). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Coilcraft |
| Package | L_Coilcraft_XAL6060-XXX |
| Category | Power Inductors - SMD |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance | -20 | 20 | % | 1 | |||
| Operating voltage | 60 | V | Printed as operating voltage; footnote 7: capability varies by part number and may be higher | 1 | |||
| Ambient temperature | -40 | 125 | °C | With 40°C rise Irms current | 1 | ||
| Storage temperature (component) | -55 | 165 | °C | Component | 1 | ||
| Maximum part temperature | 165 | °C | Ambient + temperature rise; derating applies | 1 | |||
| Storage temperature (tape and reel packaging) | -55 | 80 | °C | Tape and reel packaging | 1 | ||
| Resistance to soldering heat | 260 | °C | Max three 40 second reflows, parts cooled to room temperature between cycles | 1 | |||
| Inductance | L | 22 | µH | Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc | 1 | ||
| DC resistance (DCR) | DCR | 55.12 | 60.63 | mOhms | DCR measured on a micro-ohmmeter | 1 | |
| Self-resonant frequency (SRF) | SRF | 9 | MHz | SRF measured using Agilent/HP 4395A or equivalent | 1 | ||
| Saturation current (Isat) | Isat | 5.6 | A | DC current at 25°C that causes an inductance drop of 30% (typ) from its value without current | 1 | ||
| Irms (20°C rise) | Irms | 3.6 | A | Current that causes 20°C temperature rise from 25°C ambient; reference only, not an absolute maximum | 1 | ||
| Irms (40°C rise) | Irms | 5 | A | Current that causes 40°C temperature rise from 25°C ambient; reference only, not an absolute maximum | 1 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic | 1 |
CAD (KiCad official)
- Symbol:
XAL6060-223MEB - Footprint:
Inductor_SMD:L_Coilcraft_XAL6060-XXX - 3D model: L_Coilcraft_XAL6060-XXX (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Coilcraft datasheet, copy hosted by Mouser (4 pp, sha256
236888dabe560055, retrieved 2026-11-18) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# XAL6060-223MEB
**Coilcraft** · Power Inductors - SMD · L_Coilcraft_XAL6060-XXX
XAL6060-223MEB from Coilcraft, in a L_Coilcraft_XAL6060-XXX. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Start (short) lead: the terminal beside Coilcraft's top-side dash mark. Connect the high dv/dt node (switch node) here for lowest EMI. |
| 2 | 2 | passive | Finish terminal (the side away from the dash mark). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Coilcraft |
| Package | L_Coilcraft_XAL6060-XXX |
| Category | Power Inductors - SMD |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance | | -20 | | 20 | % | | 1 |
| Operating voltage | | | | 60 | V | Printed as operating voltage; footnote 7: capability varies by part number and may be higher | 1 |
| Ambient temperature | | -40 | | 125 | °C | With 40°C rise Irms current | 1 |
| Storage temperature (component) | | -55 | | 165 | °C | Component | 1 |
| Maximum part temperature | | | | 165 | °C | Ambient + temperature rise; derating applies | 1 |
| Storage temperature (tape and reel packaging) | | -55 | | 80 | °C | Tape and reel packaging | 1 |
| Resistance to soldering heat | | | | 260 | °C | Max three 40 second reflows, parts cooled to room temperature between cycles | 1 |
| Inductance | L | | 22 | | µH | Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc | 1 |
| DC resistance (DCR) | DCR | | 55.12 | 60.63 | mOhms | DCR measured on a micro-ohmmeter | 1 |
| Self-resonant frequency (SRF) | SRF | | 9 | | MHz | SRF measured using Agilent/HP 4395A or equivalent | 1 |
| Saturation current (Isat) | Isat | | 5.6 | | A | DC current at 25°C that causes an inductance drop of 30% (typ) from its value without current | 1 |
| Irms (20°C rise) | Irms | | 3.6 | | A | Current that causes 20°C temperature rise from 25°C ambient; reference only, not an absolute maximum | 1 |
| Irms (40°C rise) | Irms | | 5 | | A | Current that causes 40°C temperature rise from 25°C ambient; reference only, not an absolute maximum | 1 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic | 1 |
## CAD (KiCad official)
- Symbol: `XAL6060-223MEB`
- Footprint: `Inductor_SMD:L_Coilcraft_XAL6060-XXX`
- 3D model: L_Coilcraft_XAL6060-XXX (KiCad packages3D, STEP)
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Coilcraft datasheet, copy hosted by Mouser](https://www.mouser.com/datasheet/3/995/1/xal60xx.pdf) (4 pp, sha256 `236888dabe560055`, retrieved 2026-11-18)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/xal6060-223meb-datasheet.pdf)