← Commit history
README.mdadded+65
@@ -0,0 +1,65 @@+# XAL6060-223MEB++**Coilcraft** · Power Inductors - SMD · L_Coilcraft_XAL6060-XXX++XAL6060-223MEB from Coilcraft, in a L_Coilcraft_XAL6060-XXX. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | 1 | passive | Start (short) lead: the terminal beside Coilcraft's top-side dash mark. Connect the high dv/dt node (switch node) here for lowest EMI. |+| 2 | 2 | passive | Finish terminal (the side away from the dash mark). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Coilcraft |+| Package | L_Coilcraft_XAL6060-XXX |+| Category | Power Inductors - SMD |+| Pins | 2 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Inductance tolerance |  | -20 |  | 20 | % |  | 1 |+| Operating voltage |  |  |  | 60 | V | Printed as operating voltage; footnote 7: capability varies by part number and may be higher | 1 |+| Ambient temperature |  | -40 |  | 125 | °C | With 40°C rise Irms current | 1 |+| Storage temperature (component) |  | -55 |  | 165 | °C | Component | 1 |+| Maximum part temperature |  |  |  | 165 | °C | Ambient + temperature rise; derating applies | 1 |+| Storage temperature (tape and reel packaging) |  | -55 |  | 80 | °C | Tape and reel packaging | 1 |+| Resistance to soldering heat |  |  |  | 260 | °C | Max three 40 second reflows, parts cooled to room temperature between cycles | 1 |+| Inductance | L |  | 22 |  | µH | Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc | 1 |+| DC resistance (DCR) | DCR |  | 55.12 | 60.63 | mOhms | DCR measured on a micro-ohmmeter | 1 |+| Self-resonant frequency (SRF) | SRF |  | 9 |  | MHz | SRF measured using Agilent/HP 4395A or equivalent | 1 |+| Saturation current (Isat) | Isat |  | 5.6 |  | A | DC current at 25°C that causes an inductance drop of 30% (typ) from its value without current | 1 |+| Irms (20°C rise) | Irms |  | 3.6 |  | A | Current that causes 20°C temperature rise from 25°C ambient; reference only, not an absolute maximum | 1 |+| Irms (40°C rise) | Irms |  | 5 |  | A | Current that causes 40°C temperature rise from 25°C ambient; reference only, not an absolute maximum | 1 |++## Materials and finish++As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).++| Part | Material | Colour / plating | Datasheet says | Page |+|---|---|---|---|---|+| contacts |  | tin | (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic | 1 |++## CAD (KiCad official)++- Symbol: `XAL6060-223MEB`+- Footprint: `Inductor_SMD:L_Coilcraft_XAL6060-XXX`+- 3D model: L_Coilcraft_XAL6060-XXX (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Coilcraft datasheet, copy hosted by Mouser](https://www.mouser.com/datasheet/3/995/1/xal60xx.pdf) (4 pp, sha256 `236888dabe560055`, retrieved 2026-11-18)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/xal6060-223meb-datasheet.pdf)
docs/hero.pngadded
⋯ 1 unchanged line ⋯
docs/xal6060-223meb-datasheet.pdfadded
⋯ 1 unchanged line ⋯
package.jsonadded+123
@@ -0,0 +1,123 @@+{+  "slug": "xal6060-223meb",+  "version": "0.1.0",+  "type": "component",+  "description": "Coilcraft Power Inductors - SMD. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power inductors - smd",+    "xal6060-223meb",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "xal6060-223meb.kicad_sym",+    "xal6060-223meb.kicad_mod",+    "xal6060-223meb.glb",+    "xal6060-223meb.step",+    "xal6060-223meb.lbr",+    "docs/hero.png",+    "docs/xal6060-223meb-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html",+    "xal6060-223meb-hero.glb",+    "xal6060-223meb-hero.overlay.json"+  ],+  "component": {+    "mpn": "XAL6060-223MEB",+    "land_source": "datasheet",+    "land_note": "Coilcraft Document 887-4 (Revised 02/25/26) p.4 'Recommended Land Pattern' (one land for every XAL6060 value): two pads 0.056 [1.43] x 0.216 [5.50], 0.159 [4.04] centre to centre (dashed centre lines), so pads at +/-2.02. KiCad L_Coilcraft_XAL6060-XXX = 1.43 x 5.5 at +/-2.02, exactly the drawing.",+    "manufacturer": "Coilcraft",+    "package": "L_Coilcraft_XAL6060-XXX",+    "pin_count": 2,+    "category": "Power Inductors - SMD",+    "subcategory": "Power Inductors - SMD",+    "datasheet": "https://www.mouser.com/datasheet/3/995/1/xal60xx.pdf",+    "parts": {+      "symbol": "xal6060-223meb.kicad_sym",+      "footprint": "xal6060-223meb.kicad_mod",+      "model_3d": "xal6060-223meb-hero.glb",+      "model_3d_step": "xal6060-223meb.step",+      "lbr": "xal6060-223meb.lbr",+      "model_3d_plain": "xal6060-223meb.glb"+    },+    "distributor_links": {+      "mouser": "994-XAL6060-223MEB"+    },+    "distributor_check": {+      "checked_at": "2026-11-18T00:53:02Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": null,+        "status": "no match"+      },+      "mouser": {+        "pn": "994-XAL6060-223MEB",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "1",+        "type": "passive",+        "description": "Start (short) lead: the terminal beside Coilcraft's top-side dash mark. Connect the high dv/dt node (switch node) here for lowest EMI."+      },+      {+        "number": "2",+        "name": "2",+        "type": "passive",+        "description": "Finish terminal (the side away from the dash mark)."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.mouser.com/datasheet/3/995/1/xal60xx.pdf",+        "pages": 4,+        "sha256": "236888dabe560055",+        "source_tier": "lcsc",+        "citation": "Coilcraft datasheet, copy hosted by Mouser"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 2,+        "described": 2,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "xal6060-223meb.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.56,+          6.76,+          6.1+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "a86f97288f3031497314d182f8d372d82c36129e82a0ad4d76371117e17f3801",+        "checked": "2026-11-18",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  }+}
page.jsonadded+128
@@ -0,0 +1,128 @@+{+  "slug": "xal6060-223meb",+  "version": "0.1.0",+  "type": "component",+  "description": "Coilcraft Power Inductors - SMD. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power inductors - smd",+    "xal6060-223meb",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "xal6060-223meb.kicad_sym",+    "xal6060-223meb.kicad_mod",+    "xal6060-223meb.glb",+    "xal6060-223meb.step",+    "xal6060-223meb.lbr",+    "docs/hero.png",+    "docs/xal6060-223meb-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html",+    "xal6060-223meb-hero.glb",+    "xal6060-223meb-hero.overlay.json"+  ],+  "component": {+    "mpn": "XAL6060-223MEB",+    "land_source": "datasheet",+    "land_note": "Coilcraft Document 887-4 (Revised 02/25/26) p.4 'Recommended Land Pattern' (one land for every XAL6060 value): two pads 0.056 [1.43] x 0.216 [5.50], 0.159 [4.04] centre to centre (dashed centre lines), so pads at +/-2.02. KiCad L_Coilcraft_XAL6060-XXX = 1.43 x 5.5 at +/-2.02, exactly the drawing.",+    "manufacturer": "Coilcraft",+    "package": "L_Coilcraft_XAL6060-XXX",+    "pin_count": 2,+    "category": "Power Inductors - SMD",+    "subcategory": "Power Inductors - SMD",+    "datasheet": "https://www.mouser.com/datasheet/3/995/1/xal60xx.pdf",+    "parts": {+      "symbol": "xal6060-223meb.kicad_sym",+      "footprint": "xal6060-223meb.kicad_mod",+      "model_3d": "xal6060-223meb-hero.glb",+      "model_3d_step": "xal6060-223meb.step",+      "lbr": "xal6060-223meb.lbr",+      "model_3d_plain": "xal6060-223meb.glb"+    },+    "distributor_links": {+      "mouser": "994-XAL6060-223MEB"+    },+    "distributor_check": {+      "checked_at": "2026-11-18T00:53:02Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": null,+        "status": "no match"+      },+      "mouser": {+        "pn": "994-XAL6060-223MEB",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "1",+        "type": "passive",+        "description": "Start (short) lead: the terminal beside Coilcraft's top-side dash mark. Connect the high dv/dt node (switch node) here for lowest EMI."+      },+      {+        "number": "2",+        "name": "2",+        "type": "passive",+        "description": "Finish terminal (the side away from the dash mark)."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.mouser.com/datasheet/3/995/1/xal60xx.pdf",+        "pages": 4,+        "sha256": "236888dabe560055",+        "source_tier": "lcsc",+        "citation": "Coilcraft datasheet, copy hosted by Mouser"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 2,+        "described": 2,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "xal6060-223meb.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.56,+          6.76,+          6.1+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "a86f97288f3031497314d182f8d372d82c36129e82a0ad4d76371117e17f3801",+        "checked": "2026-11-18",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  },+  "visibility": "private",+  "org": "adom",+  "author": {+    "name": "Ray"+  }+}\ No newline at end of file
viewers/footprint.htmladded+1
@@ -0,0 +1 @@+<!doctype html><title>xal6060-223meb</title>\ No newline at end of file
viewers/symbol.htmladded+1
@@ -0,0 +1 @@+<!doctype html><title>xal6060-223meb</title>\ No newline at end of file
xal6060-223meb-hero.glbadded
⋯ 1 unchanged line ⋯
xal6060-223meb-hero.overlay.jsonadded+125
@@ -0,0 +1,125 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "XAL6060-223MEB",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 2,+      "span_mm": 5.5,+      "dash_mm": 0.1375,+      "gap_mm": 0.0825,+      "pad_stroke_mm": 0.033+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 4,+      "pin1": null+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 2,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 2+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.44,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -3.28,+      3.28,+      -3.38,+      3.38+    ],+    "pads_bbox_mm": [+      -2.735,+      2.735,+      -2.75,+      2.75+    ],+    "seating_z_mm": 0.0+  },+  "sources": {+    "glb": "xal6060-223meb.glb",+    "glb_sha256": "99497a74cbe594a4444ad31134ca660629d850cd2597c2cb932f69e0ffbc4237",+    "footprint": "xal6060-223meb.kicad_mod",+    "footprint_sha256": "5d27dc6b6b402bcbbe858a0606c8fcb585007cf04b3635392f9e3d253306936a",+    "pins": "page.json component.pins",+    "pins_sha256": "f89b6cef1dd40bf094bc57ef23dc246a408922a81bfac75b8bc341584ea4e214"+  },+  "generator": "adom-wiki 1.8.28 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "1",+      "x": -2.885,+      "y": 0.0,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "2",+      "text": "2",+      "x": 2.885,+      "y": 0.0,+      "align": "left",+      "vertical": false,+      "h": 0.6+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -2.02,+        0.0+      ],+      "size_mm": [+        1.43,+        5.5+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        2.02,+        0.0+      ],+      "size_mm": [+        1.43,+        5.5+      ],+      "rot": 0.0+    }+  ]+}
xal6060-223meb.glbadded
⋯ 1 unchanged line ⋯
xal6060-223meb.kicad_modadded+130
@@ -0,0 +1,130 @@+(footprint "L_Coilcraft_XAL6060-XXX"+	(version 20260206)+	(generator "kicad-footprint-generator")+	(layer "F.Cu")+	(descr "Inductor, Coilcraft, XAL6060-XXX, 6.56x6.76x6.1mm, (https://www.coilcraft.com/getmedia/ea51f14b-7f32-4dc6-8dfe-d4b70549040f/xal60xx.pdf)")+	(tags "xal")+	(property "Reference" "REF**"+		(at 0 -4.33 0)+		(layer "F.SilkS")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(property "Value" "L_Coilcraft_XAL6060-XXX"+		(at 0 4.33 0)+		(layer "F.Fab")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(property "KiLib_Generator" "inductor/SMD"+		(at 0 0 0)+		(layer "F.SilkS")+		(hide yes)+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(attr smd)+	(duplicate_pad_numbers_are_jumpers no)+	(fp_line+		(start -3.39 -3.49)+		(end 3.39 -3.49)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start -3.39 3.49)+		(end -3.39 -3.49)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 3.39 -3.49)+		(end 3.39 3.49)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 3.39 3.49)+		(end -3.39 3.49)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_rect+		(start -3.53 -3.63)+		(end 3.53 3.63)+		(stroke+			(width 0.05)+			(type solid)+		)+		(fill no)+		(layer "F.CrtYd")+	)+	(fp_rect+		(start -3.28 -3.38)+		(end 3.28 3.38)+		(stroke+			(width 0.1)+			(type solid)+		)+		(fill no)+		(layer "F.Fab")+	)+	(fp_text user "${REFERENCE}"+		(at 0 0 0)+		(layer "F.Fab")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(pad "1" smd roundrect+		(at -2.02 0)+		(size 1.43 5.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.174825)+	)+	(pad "2" smd roundrect+		(at 2.02 0)+		(size 1.43 5.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.174825)+	)+	(embedded_fonts no)+	(model "${KICAD10_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_Coilcraft_XAL6060-XXX.step"+		(offset+			(xyz 0 0 0)+		)+		(scale+			(xyz 1 1 1)+		)+		(rotate+			(xyz 0 0 0)+		)+	)+)
xal6060-223meb.kicad_symadded+185
@@ -0,0 +1,185 @@+(kicad_symbol_lib+	(version 20251024)+	(generator "kicad_symbol_editor")+	(generator_version "10.0")+(symbol "XAL6060-223MEB"+		(pin_numbers+			(hide yes)+		)+		(pin_names+			(offset 1.016)+			(hide yes)+		)+		(exclude_from_sim no)+		(in_bom yes)+		(on_board yes)+		(in_pos_files yes)+		(duplicate_pin_numbers_are_jumpers no)+		(property "Reference" "L"+			(at -1.27 0 90)+			(show_name no)+			(do_not_autoplace no)+			(effects+				(font+					(size 1.27 1.27)+				)+			)+		)+		(property "Value" "XAL6060-223MEB"+			(at 1.905 0 90)+			(show_name no)+			(do_not_autoplace no)+			(effects+				(font+					(size 1.27 1.27)+				)+			)+		)+		(property "Footprint" ""+			(at 0 0 0)+			(show_name no)+			(do_not_autoplace no)+			(hide yes)+			(effects+				(font+					(size 1.27 1.27)+				)+			)+		)+		(property "Datasheet" "https://www.mouser.com/datasheet/3/995/1/xal60xx.pdf"+			(at 0 0 0)+			(show_name no)+			(do_not_autoplace no)+			(hide yes)+			(effects+				(font+					(size 1.27 1.27)+				)+			)+		)+		(property "Description" "Inductor"+			(at 0 0 0)+			(show_name no)+			(do_not_autoplace no)+			(hide yes)+			(effects+				(font+					(size 1.27 1.27)+				)+			)+		)+		(property "ki_keywords" "inductor choke coil reactor magnetic"+			(at 0 0 0)+			(show_name no)+			(do_not_autoplace no)+			(hide yes)+			(effects+				(font+					(size 1.27 1.27)+				)+			)+		)+		(property "ki_fp_filters" "Choke_* *Coil* Inductor_* L_*"+			(at 0 0 0)+			(show_name no)+			(do_not_autoplace no)+			(hide yes)+			(effects+				(font+					(size 1.27 1.27)+				)+			)+		)+		(property "MPN" "XAL6060-223MEB" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+		(property "Mouser" "994-XAL6060-223MEB" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+		(symbol "XAL6060-223MEB_0_1"+			(arc+				(start 0 2.54)+				(mid 0.6323 1.905)+				(end 0 1.27)+				(stroke+					(width 0)+					(type default)+				)+				(fill+					(type none)+				)+			)+			(arc+				(start 0 1.27)+				(mid 0.6323 0.635)+				(end 0 0)+				(stroke+					(width 0)+					(type default)+				)+				(fill+					(type none)+				)+			)+			(arc+				(start 0 0)+				(mid 0.6323 -0.635)+				(end 0 -1.27)+				(stroke+					(width 0)+					(type default)+				)+				(fill+					(type none)+				)+			)+			(arc+				(start 0 -1.27)+				(mid 0.6323 -1.905)+				(end 0 -2.54)+				(stroke+					(width 0)+					(type default)+				)+				(fill+					(type none)+				)+			)+		)+		(symbol "XAL6060-223MEB_1_1"+			(pin passive line+				(at 0 3.81 270)+				(length 1.27)+				(name "1"+					(effects+						(font+							(size 1.27 1.27)+						)+					)+				)+				(number "1"+					(effects+						(font+							(size 1.27 1.27)+						)+					)+				)+			)+			(pin passive line+				(at 0 -3.81 90)+				(length 1.27)+				(name "2"+					(effects+						(font+							(size 1.27 1.27)+						)+					)+				)+				(number "2"+					(effects+						(font+							(size 1.27 1.27)+						)+					)+				)+			)+		)+		(embedded_fonts no)+	)+)
xal6060-223meb.lbradded+157
@@ -0,0 +1,157 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description>Coilcraft Power Inductors - SMD. Pinout settled in review by an AI reviewer against the manufacturer&apos;s datasheet</description>+<packages>+<package name="L_Coilcraft_XAL6060-XXX">+  <description>2 pads, 5.5 x 5.5 mm. Inductor, Coilcraft, XAL6060-XXX, 6.56x6.76x6.1mm</description>+  <smd name="1" x="-2.0200" y="-0.0000" dx="1.4300" dy="5.5000" layer="1" roundness="35"/>+  <smd name="2" x="2.0200" y="-0.0000" dx="1.4300" dy="5.5000" layer="1" roundness="35"/>+  <wire x1="-3.2800" y1="3.3800" x2="3.2800" y2="3.3800" width="0.1000" layer="51"/>+  <wire x1="3.2800" y1="3.3800" x2="3.2800" y2="-3.3800" width="0.1000" layer="51"/>+  <wire x1="3.2800" y1="-3.3800" x2="-3.2800" y2="-3.3800" width="0.1000" layer="51"/>+  <wire x1="-3.2800" y1="-3.3800" x2="-3.2800" y2="3.3800" width="0.1000" layer="51"/>+  <wire x1="-3.3900" y1="3.4900" x2="3.3900" y2="3.4900" width="0.1200" layer="21"/>+  <wire x1="-3.3900" y1="-3.4900" x2="-3.3900" y2="3.4900" width="0.1200" layer="21"/>+  <wire x1="3.3900" y1="3.4900" x2="3.3900" y2="-3.4900" width="0.1200" layer="21"/>+  <wire x1="3.3900" y1="-3.4900" x2="-3.3900" y2="-3.4900" width="0.1200" layer="21"/>+  <text x="0" y="4.090" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>+  <text x="0" y="-4.090" size="1.27" layer="27" align="top-center">&gt;VALUE</text>+</package>+</packages>+<symbols>+<symbol name="XAL6060-223MEB">+  <description>Coilcraft Power Inductors - SMD. Pinout settled in review by an AI reviewer against the manufacturer&apos;s datasheet</description>+  <wire x1="0.0000" y1="2.5400" x2="0.1638" y2="2.5178" width="0.1524" layer="94"/>+  <wire x1="0.1638" y1="2.5178" x2="0.3164" y2="2.4540" width="0.1524" layer="94"/>+  <wire x1="0.3164" y1="2.4540" x2="0.4473" y2="2.3531" width="0.1524" layer="94"/>+  <wire x1="0.4473" y1="2.3531" x2="0.5477" y2="2.2217" width="0.1524" layer="94"/>+  <wire x1="0.5477" y1="2.2217" x2="0.6108" y2="2.0689" width="0.1524" layer="94"/>+  <wire x1="0.6108" y1="2.0689" x2="0.6323" y2="1.9050" width="0.1524" layer="94"/>+  <wire x1="0.6323" y1="1.9050" x2="0.6108" y2="1.7411" width="0.1524" layer="94"/>+  <wire x1="0.6108" y1="1.7411" x2="0.5477" y2="1.5883" width="0.1524" layer="94"/>+  <wire x1="0.5477" y1="1.5883" x2="0.4473" y2="1.4569" width="0.1524" layer="94"/>+  <wire x1="0.4473" y1="1.4569" x2="0.3164" y2="1.3560" width="0.1524" layer="94"/>+  <wire x1="0.3164" y1="1.3560" x2="0.1638" y2="1.2922" width="0.1524" layer="94"/>+  <wire x1="0.1638" y1="1.2922" x2="0.0000" y2="1.2700" width="0.1524" layer="94"/>+  <wire x1="0.0000" y1="1.2700" x2="0.1638" y2="1.2478" width="0.1524" layer="94"/>+  <wire x1="0.1638" y1="1.2478" x2="0.3164" y2="1.1840" width="0.1524" layer="94"/>+  <wire x1="0.3164" y1="1.1840" x2="0.4473" y2="1.0831" width="0.1524" layer="94"/>+  <wire x1="0.4473" y1="1.0831" x2="0.5477" y2="0.9517" width="0.1524" layer="94"/>+  <wire x1="0.5477" y1="0.9517" x2="0.6108" y2="0.7989" width="0.1524" layer="94"/>+  <wire x1="0.6108" y1="0.7989" x2="0.6323" y2="0.6350" width="0.1524" layer="94"/>+  <wire x1="0.6323" y1="0.6350" x2="0.6108" y2="0.4711" width="0.1524" layer="94"/>+  <wire x1="0.6108" y1="0.4711" x2="0.5477" y2="0.3183" width="0.1524" layer="94"/>+  <wire x1="0.5477" y1="0.3183" x2="0.4473" y2="0.1869" width="0.1524" layer="94"/>+  <wire x1="0.4473" y1="0.1869" x2="0.3164" y2="0.0860" width="0.1524" layer="94"/>+  <wire x1="0.3164" y1="0.0860" x2="0.1638" y2="0.0222" width="0.1524" layer="94"/>+  <wire x1="0.1638" y1="0.0222" x2="0.0000" y2="-0.0000" width="0.1524" layer="94"/>+  <wire x1="0.0000" y1="0.0000" x2="0.1638" y2="-0.0222" width="0.1524" layer="94"/>+  <wire x1="0.1638" y1="-0.0222" x2="0.3164" y2="-0.0860" width="0.1524" layer="94"/>+  <wire x1="0.3164" y1="-0.0860" x2="0.4473" y2="-0.1869" width="0.1524" layer="94"/>+  <wire x1="0.4473" y1="-0.1869" x2="0.5477" y2="-0.3183" width="0.1524" layer="94"/>+  <wire x1="0.5477" y1="-0.3183" x2="0.6108" y2="-0.4711" width="0.1524" layer="94"/>+  <wire x1="0.6108" y1="-0.4711" x2="0.6323" y2="-0.6350" width="0.1524" layer="94"/>+  <wire x1="0.6323" y1="-0.6350" x2="0.6108" y2="-0.7989" width="0.1524" layer="94"/>+  <wire x1="0.6108" y1="-0.7989" x2="0.5477" y2="-0.9517" width="0.1524" layer="94"/>+  <wire x1="0.5477" y1="-0.9517" x2="0.4473" y2="-1.0831" width="0.1524" layer="94"/>+  <wire x1="0.4473" y1="-1.0831" x2="0.3164" y2="-1.1840" width="0.1524" layer="94"/>+  <wire x1="0.3164" y1="-1.1840" x2="0.1638" y2="-1.2478" width="0.1524" layer="94"/>+  <wire x1="0.1638" y1="-1.2478" x2="0.0000" y2="-1.2700" width="0.1524" layer="94"/>+  <wire x1="0.0000" y1="-1.2700" x2="0.1638" y2="-1.2922" width="0.1524" layer="94"/>+  <wire x1="0.1638" y1="-1.2922" x2="0.3164" y2="-1.3560" width="0.1524" layer="94"/>+  <wire x1="0.3164" y1="-1.3560" x2="0.4473" y2="-1.4569" width="0.1524" layer="94"/>+  <wire x1="0.4473" y1="-1.4569" x2="0.5477" y2="-1.5883" width="0.1524" layer="94"/>+  <wire x1="0.5477" y1="-1.5883" x2="0.6108" y2="-1.7411" width="0.1524" layer="94"/>+  <wire x1="0.6108" y1="-1.7411" x2="0.6323" y2="-1.9050" width="0.1524" layer="94"/>+  <wire x1="0.6323" y1="-1.9050" x2="0.6108" y2="-2.0689" width="0.1524" layer="94"/>+  <wire x1="0.6108" y1="-2.0689" x2="0.5477" y2="-2.2217" width="0.1524" layer="94"/>+  <wire x1="0.5477" y1="-2.2217" x2="0.4473" y2="-2.3531" width="0.1524" layer="94"/>+  <wire x1="0.4473" y1="-2.3531" x2="0.3164" y2="-2.4540" width="0.1524" layer="94"/>+  <wire x1="0.3164" y1="-2.4540" x2="0.1638" y2="-2.5178" width="0.1524" layer="94"/>+  <wire x1="0.1638" y1="-2.5178" x2="0.0000" y2="-2.5400" width="0.1524" layer="94"/>+  <text x="-1.2700" y="0.0000" size="1.27" layer="95" align="center">&gt;NAME</text>+  <text x="1.9050" y="0.0000" size="1.27" layer="96" align="center">&gt;VALUE</text>+  <wire x1="0.0000" y1="3.8100" x2="0.0000" y2="2.5400" width="0.254" layer="94"/>+  <pin name="1" x="0" y="3.81" length="point" direction="pas" rot="R270" visible="pad"/>+  <wire x1="0.0000" y1="-3.8100" x2="0.0000" y2="-2.5400" width="0.254" layer="94"/>+  <pin name="2" x="0" y="-3.81" length="point" direction="pas" rot="R90" visible="pad"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="XAL6060-223MEB" prefix="L">+  <description>Coilcraft Power Inductors - SMD. Pinout settled in review by an AI reviewer against the manufacturer&apos;s datasheet</description>+  <gates>+    <gate name="G$1" symbol="XAL6060-223MEB" x="0" y="0"/>+  </gates>+  <devices>+    <device name="" package="L_Coilcraft_XAL6060-XXX">+      <connects>+        <connect gate="G$1" pin="1" pad="1"/>+        <connect gate="G$1" pin="2" pad="2"/>+      </connects>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="XAL6060-223MEB" constant="no"/>+          <attribute name="MANUFACTURER" value="Coilcraft" constant="no"/>+          <attribute name="DATASHEET" value="https://www.mouser.com/datasheet/3/995/1/xal60xx.pdf" constant="no"/>+          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/xal6060-223meb" constant="no"/>+          <attribute name="MOUSER_PN" value="994-XAL6060-223MEB" constant="no"/>+        </technology>+      </technologies>+    </device>+  </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>\ No newline at end of file
xal6060-223meb.stepadded+805
@@ -0,0 +1,805 @@+ISO-10303-21;+HEADER;+/* L_Coilcraft_XAL6060-XXX.step 3D STEP model for use in ECAD systems+ * Copyright (C) 2024, KiCAD+ * + * This work is licensed under the+ * [Creative Commons CC-BY-SA 4.0 License](https://creativecommons.org/licenses/by-sa/4.0/legalcode),+ * with the following exception:+ * + * To the extent that the creation of electronic designs that use 'Licensed Material' can be+ * considered to be 'Adapted Material', then the copyright holder waives article 3 of the license+ * with respect to these designs and any generated files which use data provided as part of the+ * 'Licensed Material'.+ * + * You are free to use the library data in your own projects without the obligation to share your+ * project files under this or any other license agreement. However, if you wish to distribute+ * these libraries, or parts thereof (including in modified form) as a collection then the exception+ * above does not apply. Please refer to+ * https://gitlab.com/kicad/libraries/kicad-packages3D/-/blob/master/LICENSE.md for further clarification+ * of the exception.+ * + * Disclaimer of Warranties and Limitation of Liability.+ * These libraries are provided in the hope that they will be useful, but are provided without warranty of any kind, express or implied.+ * USE 3D CAD DATA AT YOUR OWN RISK+ * DO NOT RELY UPON ANY INFORMATION FOUND HERE WITHOUT INDEPENDENT VERIFICATION.+ */++FILE_DESCRIPTION(+/* description */ ('model of L_Coilcraft_XAL6060-XXX'),+/* implementation_level */ '2;1');++FILE_NAME(+/* name */ 'L_Coilcraft_XAL6060-XXX.step',+/* time_stamp */ '2024-11-07T18:14:43',+/* author */ ('KiCAD','kicad'),+/* organization */ ('OCCT'),+/* preprocessor_version */ '',+/* originating_system */ 'KiCAD',+/* authorisation */ '');++FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;++DATA;+#1 = APPLICATION_PROTOCOL_DEFINITION('international standard',+'automotive_design',2000,#2);+#2 = APPLICATION_CONTEXT(+'core data for automotive mechanical design processes');+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);+#5 = PRODUCT_DEFINITION('design','',#6,#9);+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);+#7 = PRODUCT('L_Coilcraft_XAL6060-XXX','L_Coilcraft_XAL6060-XXX','',(#8)+);+#8 = PRODUCT_CONTEXT('',#2,'mechanical');+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#561);+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12 = CARTESIAN_POINT('',(0.,0.,0.));+#13 = DIRECTION('',(0.,0.,1.));+#14 = DIRECTION('',(1.,0.,-0.));+#15 = MANIFOLD_SOLID_BREP('',#16);+#16 = CLOSED_SHELL('',(#17,#57,#90,#123,#250,#275,#292,#316,#347,#364,+#388,#413,#438,#455,#467,#479,#497,#515,#539,#550));+#17 = ADVANCED_FACE('',(#18),#52,.F.);+#18 = FACE_BOUND('',#19,.F.);+#19 = EDGE_LOOP('',(#20,#30,#38,#46));+#20 = ORIENTED_EDGE('',*,*,#21,.F.);+#21 = EDGE_CURVE('',#22,#24,#26,.T.);+#22 = VERTEX_POINT('',#23);+#23 = CARTESIAN_POINT('',(-3.28,-3.052,0.));+#24 = VERTEX_POINT('',#25);+#25 = CARTESIAN_POINT('',(-3.28,-3.052,5.772));+#26 = LINE('',#27,#28);+#27 = CARTESIAN_POINT('',(-3.28,-3.052,0.));+#28 = VECTOR('',#29,1.);+#29 = DIRECTION('',(0.,0.,1.));+#30 = ORIENTED_EDGE('',*,*,#31,.T.);+#31 = EDGE_CURVE('',#22,#32,#34,.T.);+#32 = VERTEX_POINT('',#33);+#33 = CARTESIAN_POINT('',(-3.28,3.052,0.));+#34 = LINE('',#35,#36);+#35 = CARTESIAN_POINT('',(-3.28,-3.38,0.));+#36 = VECTOR('',#37,1.);+#37 = DIRECTION('',(0.,1.,0.));+#38 = ORIENTED_EDGE('',*,*,#39,.T.);+#39 = EDGE_CURVE('',#32,#40,#42,.T.);+#40 = VERTEX_POINT('',#41);+#41 = CARTESIAN_POINT('',(-3.28,3.052,5.772));+#42 = LINE('',#43,#44);+#43 = CARTESIAN_POINT('',(-3.28,3.052,0.));+#44 = VECTOR('',#45,1.);+#45 = DIRECTION('',(0.,0.,1.));+#46 = ORIENTED_EDGE('',*,*,#47,.F.);+#47 = EDGE_CURVE('',#24,#40,#48,.T.);+#48 = LINE('',#49,#50);+#49 = CARTESIAN_POINT('',(-3.28,-3.052,5.772));+#50 = VECTOR('',#51,1.);+#51 = DIRECTION('',(0.,1.,0.));+#52 = PLANE('',#53);+#53 = AXIS2_PLACEMENT_3D('',#54,#55,#56);+#54 = CARTESIAN_POINT('',(-3.28,-3.38,0.));+#55 = DIRECTION('',(1.,0.,0.));+#56 = DIRECTION('',(0.,0.,1.));+#57 = ADVANCED_FACE('',(#58),#85,.T.);+#58 = FACE_BOUND('',#59,.T.);+#59 = EDGE_LOOP('',(#60,#61,#70,#78));+#60 = ORIENTED_EDGE('',*,*,#21,.F.);+#61 = ORIENTED_EDGE('',*,*,#62,.T.);+#62 = EDGE_CURVE('',#22,#63,#65,.T.);+#63 = VERTEX_POINT('',#64);+#64 = CARTESIAN_POINT('',(-2.952,-3.38,0.));+#65 = CIRCLE('',#66,0.328);+#66 = AXIS2_PLACEMENT_3D('',#67,#68,#69);+#67 = CARTESIAN_POINT('',(-2.952,-3.052,0.));+#68 = DIRECTION('',(-0.,0.,1.));+#69 = DIRECTION('',(0.,-1.,0.));+#70 = ORIENTED_EDGE('',*,*,#71,.T.);+#71 = EDGE_CURVE('',#63,#72,#74,.T.);+#72 = VERTEX_POINT('',#73);+#73 = CARTESIAN_POINT('',(-2.952,-3.38,5.772));+#74 = LINE('',#75,#76);+#75 = CARTESIAN_POINT('',(-2.952,-3.38,0.));+#76 = VECTOR('',#77,1.);+#77 = DIRECTION('',(0.,0.,1.));+#78 = ORIENTED_EDGE('',*,*,#79,.T.);+#79 = EDGE_CURVE('',#72,#24,#80,.T.);+#80 = CIRCLE('',#81,0.328);+#81 = AXIS2_PLACEMENT_3D('',#82,#83,#84);+#82 = CARTESIAN_POINT('',(-2.952,-3.052,5.772));+#83 = DIRECTION('',(-0.,-0.,-1.));+#84 = DIRECTION('',(0.,-1.,0.));+#85 = CYLINDRICAL_SURFACE('',#86,0.328);+#86 = AXIS2_PLACEMENT_3D('',#87,#88,#89);+#87 = CARTESIAN_POINT('',(-2.952,-3.052,0.));+#88 = DIRECTION('',(0.,0.,1.));+#89 = DIRECTION('',(-1.,0.,0.));+#90 = ADVANCED_FACE('',(#91),#118,.T.);+#91 = FACE_BOUND('',#92,.T.);+#92 = EDGE_LOOP('',(#93,#102,#110,#117));+#93 = ORIENTED_EDGE('',*,*,#94,.T.);+#94 = EDGE_CURVE('',#24,#95,#97,.T.);+#95 = VERTEX_POINT('',#96);+#96 = CARTESIAN_POINT('',(-2.952,-3.052,6.1));+#97 = CIRCLE('',#98,0.328);+#98 = AXIS2_PLACEMENT_3D('',#99,#100,#101);+#99 = CARTESIAN_POINT('',(-2.952,-3.052,5.772));+#100 = DIRECTION('',(0.,1.,-0.));+#101 = DIRECTION('',(-1.,0.,0.));+#102 = ORIENTED_EDGE('',*,*,#103,.T.);+#103 = EDGE_CURVE('',#95,#104,#106,.T.);+#104 = VERTEX_POINT('',#105);+#105 = CARTESIAN_POINT('',(-2.952,3.052,6.1));+#106 = LINE('',#107,#108);+#107 = CARTESIAN_POINT('',(-2.952,-3.052,6.1));+#108 = VECTOR('',#109,1.);+#109 = DIRECTION('',(0.,1.,0.));+#110 = ORIENTED_EDGE('',*,*,#111,.F.);+#111 = EDGE_CURVE('',#40,#104,#112,.T.);+#112 = CIRCLE('',#113,0.328);+#113 = AXIS2_PLACEMENT_3D('',#114,#115,#116);+#114 = CARTESIAN_POINT('',(-2.952,3.052,5.772));+#115 = DIRECTION('',(0.,1.,-0.));+#116 = DIRECTION('',(-1.,0.,0.));+#117 = ORIENTED_EDGE('',*,*,#47,.F.);+#118 = CYLINDRICAL_SURFACE('',#119,0.328);+#119 = AXIS2_PLACEMENT_3D('',#120,#121,#122);+#120 = CARTESIAN_POINT('',(-2.952,-3.052,5.772));+#121 = DIRECTION('',(0.,1.,0.));+#122 = DIRECTION('',(-1.,0.,0.));+#123 = ADVANCED_FACE('',(#124,#177,#211),#245,.F.);+#124 = FACE_BOUND('',#125,.F.);+#125 = EDGE_LOOP('',(#126,#127,#128,#136,#145,#153,#162,#170));+#126 = ORIENTED_EDGE('',*,*,#31,.F.);+#127 = ORIENTED_EDGE('',*,*,#62,.T.);+#128 = ORIENTED_EDGE('',*,*,#129,.T.);+#129 = EDGE_CURVE('',#63,#130,#132,.T.);+#130 = VERTEX_POINT('',#131);+#131 = CARTESIAN_POINT('',(2.952,-3.38,0.));+#132 = LINE('',#133,#134);+#133 = CARTESIAN_POINT('',(-3.28,-3.38,0.));+#134 = VECTOR('',#135,1.);+#135 = DIRECTION('',(1.,0.,0.));+#136 = ORIENTED_EDGE('',*,*,#137,.F.);+#137 = EDGE_CURVE('',#138,#130,#140,.T.);+#138 = VERTEX_POINT('',#139);+#139 = CARTESIAN_POINT('',(3.28,-3.052,0.));+#140 = CIRCLE('',#141,0.328);+#141 = AXIS2_PLACEMENT_3D('',#142,#143,#144);+#142 = CARTESIAN_POINT('',(2.952,-3.052,0.));+#143 = DIRECTION('',(-0.,-0.,-1.));+#144 = DIRECTION('',(0.,-1.,0.));+#145 = ORIENTED_EDGE('',*,*,#146,.T.);+#146 = EDGE_CURVE('',#138,#147,#149,.T.);+#147 = VERTEX_POINT('',#148);+#148 = CARTESIAN_POINT('',(3.28,3.052,0.));+#149 = LINE('',#150,#151);+#150 = CARTESIAN_POINT('',(3.28,-3.38,0.));+#151 = VECTOR('',#152,1.);+#152 = DIRECTION('',(0.,1.,0.));+#153 = ORIENTED_EDGE('',*,*,#154,.T.);+#154 = EDGE_CURVE('',#147,#155,#157,.T.);+#155 = VERTEX_POINT('',#156);+#156 = CARTESIAN_POINT('',(2.952,3.38,0.));+#157 = CIRCLE('',#158,0.328);+#158 = AXIS2_PLACEMENT_3D('',#159,#160,#161);+#159 = CARTESIAN_POINT('',(2.952,3.052,0.));+#160 = DIRECTION('',(-0.,0.,1.));+#161 = DIRECTION('',(0.,-1.,0.));+#162 = ORIENTED_EDGE('',*,*,#163,.F.);+#163 = EDGE_CURVE('',#164,#155,#166,.T.);+#164 = VERTEX_POINT('',#165);+#165 = CARTESIAN_POINT('',(-2.952,3.38,0.));+#166 = LINE('',#167,#168);+#167 = CARTESIAN_POINT('',(-3.28,3.38,0.));+#168 = VECTOR('',#169,1.);+#169 = DIRECTION('',(1.,0.,0.));+#170 = ORIENTED_EDGE('',*,*,#171,.F.);+#171 = EDGE_CURVE('',#32,#164,#172,.T.);+#172 = CIRCLE('',#173,0.328);+#173 = AXIS2_PLACEMENT_3D('',#174,#175,#176);+#174 = CARTESIAN_POINT('',(-2.952,3.052,0.));+#175 = DIRECTION('',(-0.,-0.,-1.));+#176 = DIRECTION('',(0.,-1.,0.));+#177 = FACE_BOUND('',#178,.F.);+#178 = EDGE_LOOP('',(#179,#189,#197,#205));+#179 = ORIENTED_EDGE('',*,*,#180,.T.);+#180 = EDGE_CURVE('',#181,#183,#185,.T.);+#181 = VERTEX_POINT('',#182);+#182 = CARTESIAN_POINT('',(-2.645,-2.5,0.));+#183 = VERTEX_POINT('',#184);+#184 = CARTESIAN_POINT('',(-2.645,2.5,0.));+#185 = LINE('',#186,#187);+#186 = CARTESIAN_POINT('',(-2.645,-2.5,0.));+#187 = VECTOR('',#188,1.);+#188 = DIRECTION('',(0.,1.,0.));+#189 = ORIENTED_EDGE('',*,*,#190,.T.);+#190 = EDGE_CURVE('',#183,#191,#193,.T.);+#191 = VERTEX_POINT('',#192);+#192 = CARTESIAN_POINT('',(-1.395,2.5,0.));+#193 = LINE('',#194,#195);+#194 = CARTESIAN_POINT('',(-2.645,2.5,0.));+#195 = VECTOR('',#196,1.);+#196 = DIRECTION('',(1.,0.,0.));+#197 = ORIENTED_EDGE('',*,*,#198,.F.);+#198 = EDGE_CURVE('',#199,#191,#201,.T.);+#199 = VERTEX_POINT('',#200);+#200 = CARTESIAN_POINT('',(-1.395,-2.5,0.));+#201 = LINE('',#202,#203);+#202 = CARTESIAN_POINT('',(-1.395,-2.5,0.));+#203 = VECTOR('',#204,1.);+#204 = DIRECTION('',(0.,1.,0.));+#205 = ORIENTED_EDGE('',*,*,#206,.F.);+#206 = EDGE_CURVE('',#181,#199,#207,.T.);+#207 = LINE('',#208,#209);+#208 = CARTESIAN_POINT('',(-2.645,-2.5,0.));+#209 = VECTOR('',#210,1.);+#210 = DIRECTION('',(1.,0.,0.));+#211 = FACE_BOUND('',#212,.F.);+#212 = EDGE_LOOP('',(#213,#223,#231,#239));+#213 = ORIENTED_EDGE('',*,*,#214,.T.);+#214 = EDGE_CURVE('',#215,#217,#219,.T.);+#215 = VERTEX_POINT('',#216);+#216 = CARTESIAN_POINT('',(1.395,-2.5,0.));+#217 = VERTEX_POINT('',#218);+#218 = CARTESIAN_POINT('',(1.395,2.5,0.));+#219 = LINE('',#220,#221);+#220 = CARTESIAN_POINT('',(1.395,-2.5,0.));+#221 = VECTOR('',#222,1.);+#222 = DIRECTION('',(0.,1.,0.));+#223 = ORIENTED_EDGE('',*,*,#224,.T.);+#224 = EDGE_CURVE('',#217,#225,#227,.T.);+#225 = VERTEX_POINT('',#226);+#226 = CARTESIAN_POINT('',(2.645,2.5,0.));+#227 = LINE('',#228,#229);+#228 = CARTESIAN_POINT('',(1.395,2.5,0.));+#229 = VECTOR('',#230,1.);+#230 = DIRECTION('',(1.,0.,0.));+#231 = ORIENTED_EDGE('',*,*,#232,.F.);+#232 = EDGE_CURVE('',#233,#225,#235,.T.);+#233 = VERTEX_POINT('',#234);+#234 = CARTESIAN_POINT('',(2.645,-2.5,0.));+#235 = LINE('',#236,#237);+#236 = CARTESIAN_POINT('',(2.645,-2.5,0.));+#237 = VECTOR('',#238,1.);+#238 = DIRECTION('',(0.,1.,0.));+#239 = ORIENTED_EDGE('',*,*,#240,.F.);+#240 = EDGE_CURVE('',#215,#233,#241,.T.);+#241 = LINE('',#242,#243);+#242 = CARTESIAN_POINT('',(1.395,-2.5,0.));+#243 = VECTOR('',#244,1.);+#244 = DIRECTION('',(1.,0.,0.));+#245 = PLANE('',#246);+#246 = AXIS2_PLACEMENT_3D('',#247,#248,#249);+#247 = CARTESIAN_POINT('',(-3.28,-3.38,0.));+#248 = DIRECTION('',(0.,0.,1.));+#249 = DIRECTION('',(1.,0.,0.));+#250 = ADVANCED_FACE('',(#251),#270,.T.);+#251 = FACE_BOUND('',#252,.F.);+#252 = EDGE_LOOP('',(#253,#254,#255,#263));+#253 = ORIENTED_EDGE('',*,*,#39,.F.);+#254 = ORIENTED_EDGE('',*,*,#171,.T.);+#255 = ORIENTED_EDGE('',*,*,#256,.T.);+#256 = EDGE_CURVE('',#164,#257,#259,.T.);+#257 = VERTEX_POINT('',#258);+#258 = CARTESIAN_POINT('',(-2.952,3.38,5.772));+#259 = LINE('',#260,#261);+#260 = CARTESIAN_POINT('',(-2.952,3.38,0.));+#261 = VECTOR('',#262,1.);+#262 = DIRECTION('',(0.,0.,1.));+#263 = ORIENTED_EDGE('',*,*,#264,.F.);+#264 = EDGE_CURVE('',#40,#257,#265,.T.);+#265 = CIRCLE('',#266,0.328);+#266 = AXIS2_PLACEMENT_3D('',#267,#268,#269);+#267 = CARTESIAN_POINT('',(-2.952,3.052,5.772));+#268 = DIRECTION('',(0.,0.,-1.));+#269 = DIRECTION('',(-1.,0.,0.));+#270 = CYLINDRICAL_SURFACE('',#271,0.328);+#271 = AXIS2_PLACEMENT_3D('',#272,#273,#274);+#272 = CARTESIAN_POINT('',(-2.952,3.052,0.));+#273 = DIRECTION('',(0.,0.,1.));+#274 = DIRECTION('',(-1.,0.,0.));+#275 = ADVANCED_FACE('',(#276),#287,.T.);+#276 = FACE_BOUND('',#277,.F.);+#277 = EDGE_LOOP('',(#278,#285,#286));+#278 = ORIENTED_EDGE('',*,*,#279,.F.);+#279 = EDGE_CURVE('',#72,#95,#280,.T.);+#280 = CIRCLE('',#281,0.328);+#281 = AXIS2_PLACEMENT_3D('',#282,#283,#284);+#282 = CARTESIAN_POINT('',(-2.952,-3.052,5.772));+#283 = DIRECTION('',(-1.,0.,0.));+#284 = DIRECTION('',(0.,-1.,0.));+#285 = ORIENTED_EDGE('',*,*,#79,.T.);+#286 = ORIENTED_EDGE('',*,*,#94,.T.);+#287 = SPHERICAL_SURFACE('',#288,0.328);+#288 = AXIS2_PLACEMENT_3D('',#289,#290,#291);+#289 = CARTESIAN_POINT('',(-2.952,-3.052,5.772));+#290 = DIRECTION('',(0.,0.,1.));+#291 = DIRECTION('',(0.,-1.,0.));+#292 = ADVANCED_FACE('',(#293),#311,.F.);+#293 = FACE_BOUND('',#294,.F.);+#294 = EDGE_LOOP('',(#295,#296,#304,#310));+#295 = ORIENTED_EDGE('',*,*,#71,.T.);+#296 = ORIENTED_EDGE('',*,*,#297,.F.);+#297 = EDGE_CURVE('',#298,#72,#300,.T.);+#298 = VERTEX_POINT('',#299);+#299 = CARTESIAN_POINT('',(2.952,-3.38,5.772));+#300 = LINE('',#301,#302);+#301 = CARTESIAN_POINT('',(2.952,-3.38,5.772));+#302 = VECTOR('',#303,1.);+#303 = DIRECTION('',(-1.,-0.,-0.));+#304 = ORIENTED_EDGE('',*,*,#305,.F.);+#305 = EDGE_CURVE('',#130,#298,#306,.T.);+#306 = LINE('',#307,#308);+#307 = CARTESIAN_POINT('',(2.952,-3.38,0.));+#308 = VECTOR('',#309,1.);+#309 = DIRECTION('',(0.,0.,1.));+#310 = ORIENTED_EDGE('',*,*,#129,.F.);+#311 = PLANE('',#312);+#312 = AXIS2_PLACEMENT_3D('',#313,#314,#315);+#313 = CARTESIAN_POINT('',(-3.28,-3.38,0.));+#314 = DIRECTION('',(0.,1.,0.));+#315 = DIRECTION('',(0.,0.,1.));+#316 = ADVANCED_FACE('',(#317),#342,.T.);+#317 = FACE_BOUND('',#318,.T.);+#318 = EDGE_LOOP('',(#319,#320,#328,#336));+#319 = ORIENTED_EDGE('',*,*,#103,.F.);+#320 = ORIENTED_EDGE('',*,*,#321,.F.);+#321 = EDGE_CURVE('',#322,#95,#324,.T.);+#322 = VERTEX_POINT('',#323);+#323 = CARTESIAN_POINT('',(2.952,-3.052,6.1));+#324 = LINE('',#325,#326);+#325 = CARTESIAN_POINT('',(2.952,-3.052,6.1));+#326 = VECTOR('',#327,1.);+#327 = DIRECTION('',(-1.,-0.,-0.));+#328 = ORIENTED_EDGE('',*,*,#329,.F.);+#329 = EDGE_CURVE('',#330,#322,#332,.T.);+#330 = VERTEX_POINT('',#331);+#331 = CARTESIAN_POINT('',(2.952,3.052,6.1));+#332 = LINE('',#333,#334);+#333 = CARTESIAN_POINT('',(2.952,3.052,6.1));+#334 = VECTOR('',#335,1.);+#335 = DIRECTION('',(-0.,-1.,-0.));+#336 = ORIENTED_EDGE('',*,*,#337,.F.);+#337 = EDGE_CURVE('',#104,#330,#338,.T.);+#338 = LINE('',#339,#340);+#339 = CARTESIAN_POINT('',(-2.952,3.052,6.1));+#340 = VECTOR('',#341,1.);+#341 = DIRECTION('',(1.,0.,0.));+#342 = PLANE('',#343);+#343 = AXIS2_PLACEMENT_3D('',#344,#345,#346);+#344 = CARTESIAN_POINT('',(-3.28,-3.38,6.1));+#345 = DIRECTION('',(0.,0.,1.));+#346 = DIRECTION('',(1.,0.,0.));+#347 = ADVANCED_FACE('',(#348),#359,.T.);+#348 = FACE_BOUND('',#349,.F.);+#349 = EDGE_LOOP('',(#350,#351,#352));+#350 = ORIENTED_EDGE('',*,*,#111,.F.);+#351 = ORIENTED_EDGE('',*,*,#264,.T.);+#352 = ORIENTED_EDGE('',*,*,#353,.T.);+#353 = EDGE_CURVE('',#257,#104,#354,.T.);+#354 = CIRCLE('',#355,0.328);+#355 = AXIS2_PLACEMENT_3D('',#356,#357,#358);+#356 = CARTESIAN_POINT('',(-2.952,3.052,5.772));+#357 = DIRECTION('',(1.,1.393499969508E-15,-0.));+#358 = DIRECTION('',(-1.393499969508E-15,1.,0.));+#359 = SPHERICAL_SURFACE('',#360,0.328);+#360 = AXIS2_PLACEMENT_3D('',#361,#362,#363);+#361 = CARTESIAN_POINT('',(-2.952,3.052,5.772));+#362 = DIRECTION('',(0.,0.,1.));+#363 = DIRECTION('',(-1.,0.,0.));+#364 = ADVANCED_FACE('',(#365),#383,.T.);+#365 = FACE_BOUND('',#366,.T.);+#366 = EDGE_LOOP('',(#367,#368,#376,#382));+#367 = ORIENTED_EDGE('',*,*,#256,.T.);+#368 = ORIENTED_EDGE('',*,*,#369,.T.);+#369 = EDGE_CURVE('',#257,#370,#372,.T.);+#370 = VERTEX_POINT('',#371);+#371 = CARTESIAN_POINT('',(2.952,3.38,5.772));+#372 = LINE('',#373,#374);+#373 = CARTESIAN_POINT('',(-2.952,3.38,5.772));+#374 = VECTOR('',#375,1.);+#375 = DIRECTION('',(1.,0.,0.));+#376 = ORIENTED_EDGE('',*,*,#377,.F.);+#377 = EDGE_CURVE('',#155,#370,#378,.T.);+#378 = LINE('',#379,#380);+#379 = CARTESIAN_POINT('',(2.952,3.38,0.));+#380 = VECTOR('',#381,1.);+#381 = DIRECTION('',(0.,0.,1.));+#382 = ORIENTED_EDGE('',*,*,#163,.F.);+#383 = PLANE('',#384);+#384 = AXIS2_PLACEMENT_3D('',#385,#386,#387);+#385 = CARTESIAN_POINT('',(-3.28,3.38,0.));+#386 = DIRECTION('',(0.,1.,0.));+#387 = DIRECTION('',(0.,0.,1.));+#388 = ADVANCED_FACE('',(#389),#408,.T.);+#389 = FACE_BOUND('',#390,.F.);+#390 = EDGE_LOOP('',(#391,#399,#400,#401));+#391 = ORIENTED_EDGE('',*,*,#392,.F.);+#392 = EDGE_CURVE('',#138,#393,#395,.T.);+#393 = VERTEX_POINT('',#394);+#394 = CARTESIAN_POINT('',(3.28,-3.052,5.772));+#395 = LINE('',#396,#397);+#396 = CARTESIAN_POINT('',(3.28,-3.052,0.));+#397 = VECTOR('',#398,1.);+#398 = DIRECTION('',(0.,0.,1.));+#399 = ORIENTED_EDGE('',*,*,#137,.T.);+#400 = ORIENTED_EDGE('',*,*,#305,.T.);+#401 = ORIENTED_EDGE('',*,*,#402,.F.);+#402 = EDGE_CURVE('',#393,#298,#403,.T.);+#403 = CIRCLE('',#404,0.328);+#404 = AXIS2_PLACEMENT_3D('',#405,#406,#407);+#405 = CARTESIAN_POINT('',(2.952,-3.052,5.772));+#406 = DIRECTION('',(0.,0.,-1.));+#407 = DIRECTION('',(1.,0.,0.));+#408 = CYLINDRICAL_SURFACE('',#409,0.328);+#409 = AXIS2_PLACEMENT_3D('',#410,#411,#412);+#410 = CARTESIAN_POINT('',(2.952,-3.052,0.));+#411 = DIRECTION('',(0.,0.,1.));+#412 = DIRECTION('',(1.,0.,0.));+#413 = ADVANCED_FACE('',(#414),#433,.T.);+#414 = FACE_BOUND('',#415,.T.);+#415 = EDGE_LOOP('',(#416,#424,#425,#426));+#416 = ORIENTED_EDGE('',*,*,#417,.F.);+#417 = EDGE_CURVE('',#147,#418,#420,.T.);+#418 = VERTEX_POINT('',#419);+#419 = CARTESIAN_POINT('',(3.28,3.052,5.772));+#420 = LINE('',#421,#422);+#421 = CARTESIAN_POINT('',(3.28,3.052,0.));+#422 = VECTOR('',#423,1.);+#423 = DIRECTION('',(0.,0.,1.));+#424 = ORIENTED_EDGE('',*,*,#154,.T.);+#425 = ORIENTED_EDGE('',*,*,#377,.T.);+#426 = ORIENTED_EDGE('',*,*,#427,.T.);+#427 = EDGE_CURVE('',#370,#418,#428,.T.);+#428 = CIRCLE('',#429,0.328);+#429 = AXIS2_PLACEMENT_3D('',#430,#431,#432);+#430 = CARTESIAN_POINT('',(2.952,3.052,5.772));+#431 = DIRECTION('',(0.,0.,-1.));+#432 = DIRECTION('',(1.353930517836E-15,1.,0.));+#433 = CYLINDRICAL_SURFACE('',#434,0.328);+#434 = AXIS2_PLACEMENT_3D('',#435,#436,#437);+#435 = CARTESIAN_POINT('',(2.952,3.052,0.));+#436 = DIRECTION('',(0.,0.,1.));+#437 = DIRECTION('',(1.,0.,0.));+#438 = ADVANCED_FACE('',(#439),#450,.T.);+#439 = FACE_BOUND('',#440,.T.);+#440 = EDGE_LOOP('',(#441,#442,#443,#444));+#441 = ORIENTED_EDGE('',*,*,#392,.F.);+#442 = ORIENTED_EDGE('',*,*,#146,.T.);+#443 = ORIENTED_EDGE('',*,*,#417,.T.);+#444 = ORIENTED_EDGE('',*,*,#445,.T.);+#445 = EDGE_CURVE('',#418,#393,#446,.T.);+#446 = LINE('',#447,#448);+#447 = CARTESIAN_POINT('',(3.28,3.052,5.772));+#448 = VECTOR('',#449,1.);+#449 = DIRECTION('',(-0.,-1.,-0.));+#450 = PLANE('',#451);+#451 = AXIS2_PLACEMENT_3D('',#452,#453,#454);+#452 = CARTESIAN_POINT('',(3.28,-3.38,0.));+#453 = DIRECTION('',(1.,0.,0.));+#454 = DIRECTION('',(0.,0.,1.));+#455 = ADVANCED_FACE('',(#456),#462,.F.);+#456 = FACE_BOUND('',#457,.F.);+#457 = EDGE_LOOP('',(#458,#459,#460,#461));+#458 = ORIENTED_EDGE('',*,*,#180,.F.);+#459 = ORIENTED_EDGE('',*,*,#206,.T.);+#460 = ORIENTED_EDGE('',*,*,#198,.T.);+#461 = ORIENTED_EDGE('',*,*,#190,.F.);+#462 = PLANE('',#463);+#463 = AXIS2_PLACEMENT_3D('',#464,#465,#466);+#464 = CARTESIAN_POINT('',(-2.645,-2.5,0.));+#465 = DIRECTION('',(0.,0.,1.));+#466 = DIRECTION('',(1.,0.,0.));+#467 = ADVANCED_FACE('',(#468),#474,.F.);+#468 = FACE_BOUND('',#469,.F.);+#469 = EDGE_LOOP('',(#470,#471,#472,#473));+#470 = ORIENTED_EDGE('',*,*,#214,.F.);+#471 = ORIENTED_EDGE('',*,*,#240,.T.);+#472 = ORIENTED_EDGE('',*,*,#232,.T.);+#473 = ORIENTED_EDGE('',*,*,#224,.F.);+#474 = PLANE('',#475);+#475 = AXIS2_PLACEMENT_3D('',#476,#477,#478);+#476 = CARTESIAN_POINT('',(1.395,-2.5,0.));+#477 = DIRECTION('',(0.,0.,1.));+#478 = DIRECTION('',(1.,0.,0.));+#479 = ADVANCED_FACE('',(#480),#492,.T.);+#480 = FACE_BOUND('',#481,.T.);+#481 = EDGE_LOOP('',(#482,#489,#490,#491));+#482 = ORIENTED_EDGE('',*,*,#483,.T.);+#483 = EDGE_CURVE('',#298,#322,#484,.T.);+#484 = CIRCLE('',#485,0.328);+#485 = AXIS2_PLACEMENT_3D('',#486,#487,#488);+#486 = CARTESIAN_POINT('',(2.952,-3.052,5.772));+#487 = DIRECTION('',(-1.,-6.123233995737E-17,0.));+#488 = DIRECTION('',(6.123233995737E-17,-1.,0.));+#489 = ORIENTED_EDGE('',*,*,#321,.T.);+#490 = ORIENTED_EDGE('',*,*,#279,.F.);+#491 = ORIENTED_EDGE('',*,*,#297,.F.);+#492 = CYLINDRICAL_SURFACE('',#493,0.328);+#493 = AXIS2_PLACEMENT_3D('',#494,#495,#496);+#494 = CARTESIAN_POINT('',(2.952,-3.052,5.772));+#495 = DIRECTION('',(-1.,-0.,-0.));+#496 = DIRECTION('',(0.,-1.,0.));+#497 = ADVANCED_FACE('',(#498),#510,.T.);+#498 = FACE_BOUND('',#499,.T.);+#499 = EDGE_LOOP('',(#500,#501,#502,#509));+#500 = ORIENTED_EDGE('',*,*,#353,.T.);+#501 = ORIENTED_EDGE('',*,*,#337,.T.);+#502 = ORIENTED_EDGE('',*,*,#503,.F.);+#503 = EDGE_CURVE('',#370,#330,#504,.T.);+#504 = CIRCLE('',#505,0.328);+#505 = AXIS2_PLACEMENT_3D('',#506,#507,#508);+#506 = CARTESIAN_POINT('',(2.952,3.052,5.772));+#507 = DIRECTION('',(1.,0.,0.));+#508 = DIRECTION('',(0.,1.,0.));+#509 = ORIENTED_EDGE('',*,*,#369,.F.);+#510 = CYLINDRICAL_SURFACE('',#511,0.328);+#511 = AXIS2_PLACEMENT_3D('',#512,#513,#514);+#512 = CARTESIAN_POINT('',(-2.952,3.052,5.772));+#513 = DIRECTION('',(1.,0.,0.));+#514 = DIRECTION('',(0.,1.,0.));+#515 = ADVANCED_FACE('',(#516),#534,.T.);+#516 = FACE_BOUND('',#517,.T.);+#517 = EDGE_LOOP('',(#518,#525,#526,#533));+#518 = ORIENTED_EDGE('',*,*,#519,.T.);+#519 = EDGE_CURVE('',#418,#330,#520,.T.);+#520 = CIRCLE('',#521,0.328);+#521 = AXIS2_PLACEMENT_3D('',#522,#523,#524);+#522 = CARTESIAN_POINT('',(2.952,3.052,5.772));+#523 = DIRECTION('',(-1.292698177878E-15,-1.,0.));+#524 = DIRECTION('',(1.,-1.292698177878E-15,0.));+#525 = ORIENTED_EDGE('',*,*,#329,.T.);+#526 = ORIENTED_EDGE('',*,*,#527,.F.);+#527 = EDGE_CURVE('',#393,#322,#528,.T.);+#528 = CIRCLE('',#529,0.328);+#529 = AXIS2_PLACEMENT_3D('',#530,#531,#532);+#530 = CARTESIAN_POINT('',(2.952,-3.052,5.772));+#531 = DIRECTION('',(0.,-1.,0.));+#532 = DIRECTION('',(1.,0.,0.));+#533 = ORIENTED_EDGE('',*,*,#445,.F.);+#534 = CYLINDRICAL_SURFACE('',#535,0.328);+#535 = AXIS2_PLACEMENT_3D('',#536,#537,#538);+#536 = CARTESIAN_POINT('',(2.952,3.052,5.772));+#537 = DIRECTION('',(-0.,-1.,-0.));+#538 = DIRECTION('',(1.,0.,0.));+#539 = ADVANCED_FACE('',(#540),#545,.T.);+#540 = FACE_BOUND('',#541,.F.);+#541 = EDGE_LOOP('',(#542,#543,#544));+#542 = ORIENTED_EDGE('',*,*,#527,.F.);+#543 = ORIENTED_EDGE('',*,*,#402,.T.);+#544 = ORIENTED_EDGE('',*,*,#483,.T.);+#545 = SPHERICAL_SURFACE('',#546,0.328);+#546 = AXIS2_PLACEMENT_3D('',#547,#548,#549);+#547 = CARTESIAN_POINT('',(2.952,-3.052,5.772));+#548 = DIRECTION('',(0.,0.,1.));+#549 = DIRECTION('',(1.,0.,0.));+#550 = ADVANCED_FACE('',(#551),#556,.T.);+#551 = FACE_BOUND('',#552,.F.);+#552 = EDGE_LOOP('',(#553,#554,#555));+#553 = ORIENTED_EDGE('',*,*,#503,.F.);+#554 = ORIENTED_EDGE('',*,*,#427,.T.);+#555 = ORIENTED_EDGE('',*,*,#519,.T.);+#556 = SPHERICAL_SURFACE('',#557,0.328);+#557 = AXIS2_PLACEMENT_3D('',#558,#559,#560);+#558 = CARTESIAN_POINT('',(2.952,3.052,5.772));+#559 = DIRECTION('',(0.,0.,1.));+#560 = DIRECTION('',(1.353930517836E-15,1.,0.));+#561 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3)+GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#565)) GLOBAL_UNIT_ASSIGNED_CONTEXT+((#562,#563,#564)) REPRESENTATION_CONTEXT('Context #1',+'3D Context with UNIT and UNCERTAINTY') );+#562 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#563 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#564 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#565 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#562,+'distance_accuracy_value','confusion accuracy');+#566 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#567 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#568,+#578,#587,#596,#605,#614,#623,#632,#641,#650,#659,#668,#677,#686,+#696,#705,#714,#723,#732,#741),#561);+#568 = STYLED_ITEM('color',(#569),#17);+#569 = PRESENTATION_STYLE_ASSIGNMENT((#570,#576));+#570 = SURFACE_STYLE_USAGE(.BOTH.,#571);+#571 = SURFACE_SIDE_STYLE('',(#572));+#572 = SURFACE_STYLE_FILL_AREA(#573);+#573 = FILL_AREA_STYLE('',(#574));+#574 = FILL_AREA_STYLE_COLOUR('',#575);+#575 = COLOUR_RGB('',0.147999998088,0.145000001626,0.145000001626);+#576 = CURVE_STYLE('',#577,POSITIVE_LENGTH_MEASURE(0.1),#575);+#577 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#578 = STYLED_ITEM('color',(#579),#57);+#579 = PRESENTATION_STYLE_ASSIGNMENT((#580,#585));+#580 = SURFACE_STYLE_USAGE(.BOTH.,#581);+#581 = SURFACE_SIDE_STYLE('',(#582));+#582 = SURFACE_STYLE_FILL_AREA(#583);+#583 = FILL_AREA_STYLE('',(#584));+#584 = FILL_AREA_STYLE_COLOUR('',#575);+#585 = CURVE_STYLE('',#586,POSITIVE_LENGTH_MEASURE(0.1),#575);+#586 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#587 = STYLED_ITEM('color',(#588),#90);+#588 = PRESENTATION_STYLE_ASSIGNMENT((#589,#594));+#589 = SURFACE_STYLE_USAGE(.BOTH.,#590);+#590 = SURFACE_SIDE_STYLE('',(#591));+#591 = SURFACE_STYLE_FILL_AREA(#592);+#592 = FILL_AREA_STYLE('',(#593));+#593 = FILL_AREA_STYLE_COLOUR('',#575);+#594 = CURVE_STYLE('',#595,POSITIVE_LENGTH_MEASURE(0.1),#575);+#595 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#596 = STYLED_ITEM('color',(#597),#123);+#597 = PRESENTATION_STYLE_ASSIGNMENT((#598,#603));+#598 = SURFACE_STYLE_USAGE(.BOTH.,#599);+#599 = SURFACE_SIDE_STYLE('',(#600));+#600 = SURFACE_STYLE_FILL_AREA(#601);+#601 = FILL_AREA_STYLE('',(#602));+#602 = FILL_AREA_STYLE_COLOUR('',#575);+#603 = CURVE_STYLE('',#604,POSITIVE_LENGTH_MEASURE(0.1),#575);+#604 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#605 = STYLED_ITEM('color',(#606),#250);+#606 = PRESENTATION_STYLE_ASSIGNMENT((#607,#612));+#607 = SURFACE_STYLE_USAGE(.BOTH.,#608);+#608 = SURFACE_SIDE_STYLE('',(#609));+#609 = SURFACE_STYLE_FILL_AREA(#610);+#610 = FILL_AREA_STYLE('',(#611));+#611 = FILL_AREA_STYLE_COLOUR('',#575);+#612 = CURVE_STYLE('',#613,POSITIVE_LENGTH_MEASURE(0.1),#575);+#613 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#614 = STYLED_ITEM('color',(#615),#275);+#615 = PRESENTATION_STYLE_ASSIGNMENT((#616,#621));+#616 = SURFACE_STYLE_USAGE(.BOTH.,#617);+#617 = SURFACE_SIDE_STYLE('',(#618));+#618 = SURFACE_STYLE_FILL_AREA(#619);+#619 = FILL_AREA_STYLE('',(#620));+#620 = FILL_AREA_STYLE_COLOUR('',#575);+#621 = CURVE_STYLE('',#622,POSITIVE_LENGTH_MEASURE(0.1),#575);+#622 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#623 = STYLED_ITEM('color',(#624),#292);+#624 = PRESENTATION_STYLE_ASSIGNMENT((#625,#630));+#625 = SURFACE_STYLE_USAGE(.BOTH.,#626);+#626 = SURFACE_SIDE_STYLE('',(#627));+#627 = SURFACE_STYLE_FILL_AREA(#628);+#628 = FILL_AREA_STYLE('',(#629));+#629 = FILL_AREA_STYLE_COLOUR('',#575);+#630 = CURVE_STYLE('',#631,POSITIVE_LENGTH_MEASURE(0.1),#575);+#631 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#632 = STYLED_ITEM('color',(#633),#316);+#633 = PRESENTATION_STYLE_ASSIGNMENT((#634,#639));+#634 = SURFACE_STYLE_USAGE(.BOTH.,#635);+#635 = SURFACE_SIDE_STYLE('',(#636));+#636 = SURFACE_STYLE_FILL_AREA(#637);+#637 = FILL_AREA_STYLE('',(#638));+#638 = FILL_AREA_STYLE_COLOUR('',#575);+#639 = CURVE_STYLE('',#640,POSITIVE_LENGTH_MEASURE(0.1),#575);+#640 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#641 = STYLED_ITEM('color',(#642),#347);+#642 = PRESENTATION_STYLE_ASSIGNMENT((#643,#648));+#643 = SURFACE_STYLE_USAGE(.BOTH.,#644);+#644 = SURFACE_SIDE_STYLE('',(#645));+#645 = SURFACE_STYLE_FILL_AREA(#646);+#646 = FILL_AREA_STYLE('',(#647));+#647 = FILL_AREA_STYLE_COLOUR('',#575);+#648 = CURVE_STYLE('',#649,POSITIVE_LENGTH_MEASURE(0.1),#575);+#649 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#650 = STYLED_ITEM('color',(#651),#364);+#651 = PRESENTATION_STYLE_ASSIGNMENT((#652,#657));+#652 = SURFACE_STYLE_USAGE(.BOTH.,#653);+#653 = SURFACE_SIDE_STYLE('',(#654));+#654 = SURFACE_STYLE_FILL_AREA(#655);+#655 = FILL_AREA_STYLE('',(#656));+#656 = FILL_AREA_STYLE_COLOUR('',#575);+#657 = CURVE_STYLE('',#658,POSITIVE_LENGTH_MEASURE(0.1),#575);+#658 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#659 = STYLED_ITEM('color',(#660),#388);+#660 = PRESENTATION_STYLE_ASSIGNMENT((#661,#666));+#661 = SURFACE_STYLE_USAGE(.BOTH.,#662);+#662 = SURFACE_SIDE_STYLE('',(#663));+#663 = SURFACE_STYLE_FILL_AREA(#664);+#664 = FILL_AREA_STYLE('',(#665));+#665 = FILL_AREA_STYLE_COLOUR('',#575);+#666 = CURVE_STYLE('',#667,POSITIVE_LENGTH_MEASURE(0.1),#575);+#667 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#668 = STYLED_ITEM('color',(#669),#413);+#669 = PRESENTATION_STYLE_ASSIGNMENT((#670,#675));+#670 = SURFACE_STYLE_USAGE(.BOTH.,#671);+#671 = SURFACE_SIDE_STYLE('',(#672));+#672 = SURFACE_STYLE_FILL_AREA(#673);+#673 = FILL_AREA_STYLE('',(#674));+#674 = FILL_AREA_STYLE_COLOUR('',#575);+#675 = CURVE_STYLE('',#676,POSITIVE_LENGTH_MEASURE(0.1),#575);+#676 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#677 = STYLED_ITEM('color',(#678),#438);+#678 = PRESENTATION_STYLE_ASSIGNMENT((#679,#684));+#679 = SURFACE_STYLE_USAGE(.BOTH.,#680);+#680 = SURFACE_SIDE_STYLE('',(#681));+#681 = SURFACE_STYLE_FILL_AREA(#682);+#682 = FILL_AREA_STYLE('',(#683));+#683 = FILL_AREA_STYLE_COLOUR('',#575);+#684 = CURVE_STYLE('',#685,POSITIVE_LENGTH_MEASURE(0.1),#575);+#685 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#686 = STYLED_ITEM('color',(#687),#455);+#687 = PRESENTATION_STYLE_ASSIGNMENT((#688,#694));+#688 = SURFACE_STYLE_USAGE(.BOTH.,#689);+#689 = SURFACE_SIDE_STYLE('',(#690));+#690 = SURFACE_STYLE_FILL_AREA(#691);+#691 = FILL_AREA_STYLE('',(#692));+#692 = FILL_AREA_STYLE_COLOUR('',#693);+#693 = COLOUR_RGB('',0.823999987314,0.819999987296,0.781000009244);+#694 = CURVE_STYLE('',#695,POSITIVE_LENGTH_MEASURE(0.1),#693);+#695 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#696 = STYLED_ITEM('color',(#697),#467);+#697 = PRESENTATION_STYLE_ASSIGNMENT((#698,#703));+#698 = SURFACE_STYLE_USAGE(.BOTH.,#699);+#699 = SURFACE_SIDE_STYLE('',(#700));+#700 = SURFACE_STYLE_FILL_AREA(#701);+#701 = FILL_AREA_STYLE('',(#702));+#702 = FILL_AREA_STYLE_COLOUR('',#693);+#703 = CURVE_STYLE('',#704,POSITIVE_LENGTH_MEASURE(0.1),#693);+#704 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#705 = STYLED_ITEM('color',(#706),#479);+#706 = PRESENTATION_STYLE_ASSIGNMENT((#707,#712));+#707 = SURFACE_STYLE_USAGE(.BOTH.,#708);+#708 = SURFACE_SIDE_STYLE('',(#709));+#709 = SURFACE_STYLE_FILL_AREA(#710);+#710 = FILL_AREA_STYLE('',(#711));+#711 = FILL_AREA_STYLE_COLOUR('',#575);+#712 = CURVE_STYLE('',#713,POSITIVE_LENGTH_MEASURE(0.1),#575);+#713 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#714 = STYLED_ITEM('color',(#715),#497);+#715 = PRESENTATION_STYLE_ASSIGNMENT((#716,#721));+#716 = SURFACE_STYLE_USAGE(.BOTH.,#717);+#717 = SURFACE_SIDE_STYLE('',(#718));+#718 = SURFACE_STYLE_FILL_AREA(#719);+#719 = FILL_AREA_STYLE('',(#720));+#720 = FILL_AREA_STYLE_COLOUR('',#575);+#721 = CURVE_STYLE('',#722,POSITIVE_LENGTH_MEASURE(0.1),#575);+#722 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#723 = STYLED_ITEM('color',(#724),#515);+#724 = PRESENTATION_STYLE_ASSIGNMENT((#725,#730));+#725 = SURFACE_STYLE_USAGE(.BOTH.,#726);+#726 = SURFACE_SIDE_STYLE('',(#727));+#727 = SURFACE_STYLE_FILL_AREA(#728);+#728 = FILL_AREA_STYLE('',(#729));+#729 = FILL_AREA_STYLE_COLOUR('',#575);+#730 = CURVE_STYLE('',#731,POSITIVE_LENGTH_MEASURE(0.1),#575);+#731 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#732 = STYLED_ITEM('color',(#733),#539);+#733 = PRESENTATION_STYLE_ASSIGNMENT((#734,#739));+#734 = SURFACE_STYLE_USAGE(.BOTH.,#735);+#735 = SURFACE_SIDE_STYLE('',(#736));+#736 = SURFACE_STYLE_FILL_AREA(#737);+#737 = FILL_AREA_STYLE('',(#738));+#738 = FILL_AREA_STYLE_COLOUR('',#575);+#739 = CURVE_STYLE('',#740,POSITIVE_LENGTH_MEASURE(0.1),#575);+#740 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#741 = STYLED_ITEM('color',(#742),#550);+#742 = PRESENTATION_STYLE_ASSIGNMENT((#743,#748));+#743 = SURFACE_STYLE_USAGE(.BOTH.,#744);+#744 = SURFACE_SIDE_STYLE('',(#745));+#745 = SURFACE_STYLE_FILL_AREA(#746);+#746 = FILL_AREA_STYLE('',(#747));+#747 = FILL_AREA_STYLE_COLOUR('',#575);+#748 = CURVE_STYLE('',#749,POSITIVE_LENGTH_MEASURE(0.1),#575);+#749 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+ENDSEC;+END-ISO-10303-21;