main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers x9c103siz: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray
x9c103siz-etched.glb Publish 0.1.0 · Ray
x9c103siz-etched.step x9c103siz: factory component page (tier=lcsc) · Ray
x9c103siz-hero.glb x9c103siz: hero GLB from the etched model (keeps the MPN mark) · Ray
x9c103siz-hero.overlay.json Publish 0.1.0 · Ray
x9c103siz.glb Publish 0.1.0 · Ray
x9c103siz.kicad_mod Publish 0.1.0 · Ray
x9c103siz.kicad_sym Publish 0.1.0 · Ray
x9c103siz.lbr Publish 0.1.0 · Ray
x9c103siz.step Publish 0.1.0 · Ray

X9C103SIZ

RENESAS · Digital Potentiometers · SOIC-8

X9C103SIZ from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 INC input Increment input, negative-edge triggered; toggling INC moves the wiper up or down in the direction set by U/D.
2 U/D input Up/Down input that controls the direction of wiper movement and whether the counter is incremented or decremented.
3 VH/RH passive High fixed terminal of the potentiometer, with a voltage range of -5V to +5V.
4 VSS power_in Ground (VSS) supply pin of the device.
5 VW/RW passive Wiper terminal, equivalent to the movable terminal of a mechanical potentiometer, with typical series resistance of 40 ohms.
6 VL/RL passive Low fixed terminal of the potentiometer, with a voltage range of -5V to +5V.
7 CS input Chip select, active LOW; the wiper position is stored in non-volatile memory when CS returns HIGH while INC is HIGH.
8 VCC power_in Supply voltage pin, 5V ±10% recommended operating range.

Key specifications

Parameter Value
Manufacturer RENESAS
Package SOIC-8
Category Data Converters
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
End-to-End Resistance Variation RTOTAL -20 20 % 4
VH Terminal Voltage VVH/RH -5 5 V 4
VL Terminal Voltage VVL/RL -5 5 V 4
Wiper Current IW -4.4 4.4 mA 4
Wiper Resistance RW 40 100 Ω Wiper Current = ±1mA 4
Absolute Linearity -1 1 MI VW(n)(actual) - VW(n)(EXPECTED) 4
Relative Linearity -0.2 0.2 MI VW(n+1)(ACTUAL) - [VW(n) + MI] 4
RTOTAL Temperature Coefficient -300 300 ppm/°C X9C103, X9C503, X9C104 4
Ratiometric Temperature Coefficient -20 20 ppm/°C 4
VCC Active Current ICC 1 3 mA CS = VIL, U/D = VIL or VIH and INC = 0.4V to 2.4V at Max tCYC 4
Standby Supply Current ISB 200 750 µA CS = VCC - 0.3V, U/D and INC = VSS or VCC - 0.3V 4
CS, INC, U/D Input Leakage Current ILI -10 10 µA VIN = VSS to VCC 4
CS, INC, U/D Input HIGH Voltage VIH 2 V 4
CS, INC, U/D Input LOW Voltage VIL 0.8 V 4
CS to INC Setup tCI 100 ns 5
INC HIGH to U/D Change tID 100 ns 5
U/D to INC Setup tDI 2.9 µs 5
INC LOW Period tIL 1 µs 5
INC HIGH Period tIH 1 µs 5
INC Inactive to CS Inactive tIC 1 µs 5
CS Deselect Time (STORE) tCPH 20 ms STORE 5
CS Deselect Time (NO STORE) tCPH 100 ns NO STORE 5
INC to VW/RW Change tIW 100 µs 5
INC Cycle Time tCYC 2 µs 5
INC Input Rise and Fall Time tR, tF 500 µs 5
Power-up to Wiper Stable tPU 500 µs Note 8 5
VCC Power-up Rate 0.2 50 V/ms Note 8 5
Medium Endurance 100000 data changes per bit per register 5
Data Retention 100 years 5
Supply Voltage Range VCC -10 10 % 5V ±10% 4
Industrial Temperature Range -40 85 °C 4
Voltage on CS, INC, U/D and VCC with Respect to VSS -1 7 V 4
Voltage on VH/RH and VL/RL Referenced to VSS -8 8 V 4
/VH/RH - VL/RL/ V 10 V X9C103, X9C104, and X9C503 4
Power Rating 10 mW X9C103 4
Temperature Under Bias -65 135 °C 4
Storage Temperature -65 150 °C 4
End-to-End Resistance (nominal) RTOTAL 10 kΩ X9C103 2
Resistor Noise -120 dBV Ref 1kHz 4
Charge Pump Noise 20 mVRMS @ 850kHz 4
Resolution 1 % 4
Potentiometer Capacitance CH CH 10 pF 4
Potentiometer Capacitance CL CL 10 pF 4
Potentiometer Capacitance CW CW 25 pF 4
CS, INC, U/D Input Capacitance CIN 10 pF VCC = 5V, VIN = VSS, TA = +25°C, f = 1MHz 4

CAD (KiCad official)

  • Symbol: X9C103SIZ
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: x9c103siz-etched.step / x9c103siz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); x9c103siz.step / x9c103siz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (12 pp, sha256 f6e174514ebd0e4d, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF