3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownX9C103SIZ
RENESAS · Digital Potentiometers · SOIC-8
X9C103SIZ from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INC | input | Increment input, negative-edge triggered; toggling INC moves the wiper up or down in the direction set by U/D. |
| 2 | U/D | input | Up/Down input that controls the direction of wiper movement and whether the counter is incremented or decremented. |
| 3 | VH/RH | passive | High fixed terminal of the potentiometer, with a voltage range of -5V to +5V. |
| 4 | VSS | power_in | Ground (VSS) supply pin of the device. |
| 5 | VW/RW | passive | Wiper terminal, equivalent to the movable terminal of a mechanical potentiometer, with typical series resistance of 40 ohms. |
| 6 | VL/RL | passive | Low fixed terminal of the potentiometer, with a voltage range of -5V to +5V. |
| 7 | CS | input | Chip select, active LOW; the wiper position is stored in non-volatile memory when CS returns HIGH while INC is HIGH. |
| 8 | VCC | power_in | Supply voltage pin, 5V ±10% recommended operating range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-8 |
| Category | Data Converters |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| End-to-End Resistance Variation | RTOTAL | -20 | 20 | % | 4 | ||
| VH Terminal Voltage | VVH/RH | -5 | 5 | V | 4 | ||
| VL Terminal Voltage | VVL/RL | -5 | 5 | V | 4 | ||
| Wiper Current | IW | -4.4 | 4.4 | mA | 4 | ||
| Wiper Resistance | RW | 40 | 100 | Ω | Wiper Current = ±1mA | 4 | |
| Absolute Linearity | -1 | 1 | MI | VW(n)(actual) - VW(n)(EXPECTED) | 4 | ||
| Relative Linearity | -0.2 | 0.2 | MI | VW(n+1)(ACTUAL) - [VW(n) + MI] | 4 | ||
| RTOTAL Temperature Coefficient | -300 | 300 | ppm/°C | X9C103, X9C503, X9C104 | 4 | ||
| Ratiometric Temperature Coefficient | -20 | 20 | ppm/°C | 4 | |||
| VCC Active Current | ICC | 1 | 3 | mA | CS = VIL, U/D = VIL or VIH and INC = 0.4V to 2.4V at Max tCYC | 4 | |
| Standby Supply Current | ISB | 200 | 750 | µA | CS = VCC - 0.3V, U/D and INC = VSS or VCC - 0.3V | 4 | |
| CS, INC, U/D Input Leakage Current | ILI | -10 | 10 | µA | VIN = VSS to VCC | 4 | |
| CS, INC, U/D Input HIGH Voltage | VIH | 2 | V | 4 | |||
| CS, INC, U/D Input LOW Voltage | VIL | 0.8 | V | 4 | |||
| CS to INC Setup | tCI | 100 | ns | 5 | |||
| INC HIGH to U/D Change | tID | 100 | ns | 5 | |||
| U/D to INC Setup | tDI | 2.9 | µs | 5 | |||
| INC LOW Period | tIL | 1 | µs | 5 | |||
| INC HIGH Period | tIH | 1 | µs | 5 | |||
| INC Inactive to CS Inactive | tIC | 1 | µs | 5 | |||
| CS Deselect Time (STORE) | tCPH | 20 | ms | STORE | 5 | ||
| CS Deselect Time (NO STORE) | tCPH | 100 | ns | NO STORE | 5 | ||
| INC to VW/RW Change | tIW | 100 | µs | 5 | |||
| INC Cycle Time | tCYC | 2 | µs | 5 | |||
| INC Input Rise and Fall Time | tR, tF | 500 | µs | 5 | |||
| Power-up to Wiper Stable | tPU | 500 | µs | Note 8 | 5 | ||
| VCC Power-up Rate | 0.2 | 50 | V/ms | Note 8 | 5 | ||
| Medium Endurance | 100000 | data changes per bit per register | 5 | ||||
| Data Retention | 100 | years | 5 | ||||
| Supply Voltage Range | VCC | -10 | 10 | % | 5V ±10% | 4 | |
| Industrial Temperature Range | -40 | 85 | °C | 4 | |||
| Voltage on CS, INC, U/D and VCC with Respect to VSS | -1 | 7 | V | 4 | |||
| Voltage on VH/RH and VL/RL Referenced to VSS | -8 | 8 | V | 4 | |||
| /VH/RH - VL/RL/ | V | 10 | V | X9C103, X9C104, and X9C503 | 4 | ||
| Power Rating | 10 | mW | X9C103 | 4 | |||
| Temperature Under Bias | -65 | 135 | °C | 4 | |||
| Storage Temperature | -65 | 150 | °C | 4 | |||
| End-to-End Resistance (nominal) | RTOTAL | 10 | kΩ | X9C103 | 2 | ||
| Resistor Noise | -120 | dBV | Ref 1kHz | 4 | |||
| Charge Pump Noise | 20 | mVRMS | @ 850kHz | 4 | |||
| Resolution | 1 | % | 4 | ||||
| Potentiometer Capacitance CH | CH | 10 | pF | 4 | |||
| Potentiometer Capacitance CL | CL | 10 | pF | 4 | |||
| Potentiometer Capacitance CW | CW | 25 | pF | 4 | |||
| CS, INC, U/D Input Capacitance | CIN | 10 | pF | VCC = 5V, VIN = VSS, TA = +25°C, f = 1MHz | 4 |
CAD (KiCad official)
- Symbol:
X9C103SIZ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
x9c103siz-etched.step/x9c103siz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);x9c103siz.step/x9c103siz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (12 pp, sha256
f6e174514ebd0e4d, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).