main
Ray
Publish 0.1.0
cc4dd22
X95820UV14IZ-2.7
RENESAS · Digital Potentiometers · TSSOP-14
X95820UV14IZ-2.7 from RENESAS, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Power supply pin; the device operates from 2.7V to 5.5V. |
| 2 | WP | input | Active-low hardware write protection pin that prevents any Write operation of the I2C interface; it must be at logic HIGH to allow writes. |
| 3 | RH0 | passive | "High" terminal of DCP0; voltage at any DCP pin must stay between GND and VCC. |
| 4 | RL0 | passive | "Low" terminal of DCP0; voltage at any DCP pin must stay between GND and VCC. |
| 5 | RW0 | passive | "Wiper" terminal of DCP0; wiper current is limited to ±3.0mA and voltage must stay between GND and VCC. |
| 6 | A2 | input | Device address input for the I2C interface, which sets address bit A2 and must match the identification byte. |
| 7 | SCL | input | I2C interface clock input; the maximum SCL frequency is 400 kHz. |
| 8 | SDA | bidirectional | Serial data I/O for the I2C interface; its input buffer thresholds are 0.3VCC (low) and 0.7VCC (high), and it sinks 4mA with VOL up to 0.4V. |
| 9 | GND | power_in | Ground reference pin for the device. |
| 10 | RW1 | passive | "Wiper" terminal of DCP1; wiper current is limited to ±3.0mA and voltage must stay between GND and VCC. |
| 11 | RL1 | passive | "Low" terminal of DCP1; voltage at any DCP pin must stay between GND and VCC. |
| 12 | RH1 | passive | "High" terminal of DCP1; voltage at any DCP pin must stay between GND and VCC. |
| 13 | A0 | input | Device address input for the I2C interface, which sets address bit A0 and must match the identification byte. |
| 14 | A1 | input | Device address input for the I2C interface, which sets address bit A1 and must match the identification byte. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | TSSOP-14 |
| Category | Data Converters |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| RH to RL Resistance (RTOTAL), U version | RTOTAL | 50 | kΩ | U version (50k) | 3 | ||
| RH to RL Resistance Tolerance | -20 | 20 | % | 3 | |||
| Wiper Resistance | RW | 70 | 200 | Ω | VCC = 3.3V @ 25°C; wiper current = VCC/RTOTAL | 3 | |
| CH Potentiometer Capacitance | CH | 10 | pF | Note 15 | 3 | ||
| CL Potentiometer Capacitance | CL | 10 | pF | Note 15 | 3 | ||
| CW Potentiometer Capacitance | CW | 25 | pF | Note 15 | 3 | ||
| Leakage on DCP Pins | ILkgDCP | 0.1 | 1 | µA | Voltage at pin from GND to VCC | 3 | |
| Integral Non-linearity (voltage divider) | INL | -1 | 1 | LSB | Voltage divider mode (Note 2) | 3 | |
| Differential Non-linearity (voltage divider) | DNL | -0.5 | 0.5 | LSB | Monotonic over all tap positions (Note 2) | 3 | |
| Zero-scale Error, U option | ZSerror | 0 | 1 | 7 | LSB | U option (Note 2) | 3 |
| Full-scale Error, U option | FSerror | -7 | -1 | 0 | LSB | U option (Note 2) | 3 |
| DCP to DCP Matching (voltage divider) | VMATCH | -2 | 2 | LSB | Any two DCPs at same tap position and same terminal voltages (Note 2) | 3 | |
| Ratiometric Temperature Coefficient | TCV | -4 | 4 | ppm/°C | DCP Register set to 80 hex | 3 | |
| Integral Non-linearity (resistor mode) | RINL | -1 | 1 | MI | DCP register between 20 hex and FF hex; monotonic | 3 | |
| Differential Non-linearity (resistor mode) | RDNL | -0.5 | 0.5 | MI | Resistor mode | 3 | |
| Offset, U option | Roffset | 0 | 1 | 7 | MI | DCP register set to 00 hex, U option | 3 |
| DCP to DCP Matching (resistor mode) | RMATCH | -2 | 2 | MI | Any two DCPs at same tap position with same terminal voltages | 3 | |
| Resistance Temperature Coefficient | TCR | -45 | 45 | ppm/°C | DCP register set between 20 hex and FF hex | 3 | |
| VCC Supply Current (volatile write/read) | ICC1 | 1 | mA | fSCL = 400kHz; SDA = Open | 4 | ||
| VCC Supply Current (nonvolatile write) | ICC2 | 3 | mA | fSCL = 400kHz; SDA = Open | 4 | ||
| VCC Current (standby) | ISB | 5 | µA | VCC = +5.5V, I2C interface in standby | 4 | ||
| VCC Current (standby) | ISB | 2 | µA | VCC = +3.6V, I2C interface in standby | 4 | ||
| Leakage Current at A0, A1, A2, SDA, SCL, WP | ILkgDig | -10 | 10 | µA | Voltage at pin from GND to VCC | 4 | |
| DCP Wiper Response Time | tDCP | 1 | µs | SCL falling edge of last bit of DCP Data Byte to wiper change (Note 15) | 4 | ||
| Power-on Recall Voltage | Vpor | 1.8 | 2.6 | V | Minimum VCC at which memory recall occurs | 4 | |
| VCC Ramp Rate | VccRamp | 0.2 | V/ms | 4 | |||
| Power-up Delay | tD | 3 | ms | VCC above Vpor, to DCP IVR recall completed and I2C in standby (Note 15) | 4 | ||
| EEPROM Endurance | 150000 | Cycles | 4 | ||||
| EEPROM Retention | 50 | Years | Temperature 75°C | 4 | |||
| Input Buffer LOW Voltage | VIL | -0.3 | V | WP, A2, A1, A0, SDA, SCL; maximum printed as 0.3*Vcc | 4 | ||
| SDA Output Buffer LOW Voltage | VOL | 0 | 0.4 | V | Sinking 4mA | 4 | |
| WP, A2, A1, A0, SDA, SCL Pin Capacitance | Cpin | 10 | pF | Note 15 | 4 | ||
| SCL Frequency | fSCL | 400 | kHz | 4 | |||
| Pulse Width Suppression Time at SDA and SCL | tIN | 50 | ns | Any pulse narrower than the max spec is suppressed (Note 15) | 4 | ||
| SCL Falling Edge to SDA Output Data Valid | tAA | 900 | ns | SCL falling edge crossing 30% of VCC until SDA exits 30% to 70% window | 4 | ||
| Time the Bus Must be Free Before Start | tBUF | 1300 | ns | SDA crossing 70% of VCC during STOP to START | 4 | ||
| Clock LOW Time | tLOW | 1300 | ns | Measured at 30% of VCC crossing | 4 | ||
| Clock HIGH Time | tHIGH | 600 | ns | Measured at 70% of VCC crossing | 4 | ||
| START Condition Setup Time | tSU:STA | 600 | ns | SCL rising edge to SDA falling edge, both at 70% of VCC | 4 | ||
| START Condition Hold Time | tHD:STA | 600 | ns | SDA falling edge at 30% of VCC to SCL falling edge at 70% of VCC | 4 | ||
| Input Data Setup Time | tSU:DAT | 100 | ns | SDA exiting 30% to 70% window to SCL rising edge at 30% of VCC | 5 | ||
| Input Data Hold Time | tHD:DAT | 0 | ns | SCL rising edge at 70% of VCC to SDA entering 30% to 70% window | 5 | ||
| STOP Condition Setup Time | tSU:STO | 600 | ns | SCL rising edge at 70% of VCC to SDA rising edge at 30% of VCC | 5 | ||
| STOP Condition Hold Time | tHD:STO | 600 | ns | SDA rising edge to SCL falling edge, both at 70% of VCC | 5 | ||
| Output Data Hold Time | tDH | 0 | ns | SCL falling edge at 30% of VCC until SDA enters 30% to 70% window | 5 | ||
| SDA and SCL Rise Time | tR | 250 | ns | 30% to 70% of VCC; formula 20 + 0.1*Cb (Note 15) | 5 | ||
| SDA and SCL Fall Time | tF | 250 | ns | 70% to 30% of VCC; formula 20 + 0.1*Cb (Note 15) | 5 | ||
| Capacitive Loading of SDA or SCL | Cb | 10 | 400 | pF | Total on-chip and off-chip (Note 15) | 5 | |
| SDA and SCL Bus Pull-up Resistor, off-chip | Rpu | 1 | kΩ | Maximum determined by tR and tF (Note 15) | 5 | ||
| Non-volatile Write Cycle Time | tWP | 12 | 20 | ms | Notes 15, 16 | 5 | |
| A2, A1, A0, WP Setup Time | tSU:WPA | 600 | ns | Before START condition | 5 | ||
| A2, A1, A0, WP Hold Time | tHD:WPA | 600 | ns | After STOP condition | 5 | ||
| Recommended VCC Supply Voltage | VCC | 2.7 | 5.5 | V | 3 | ||
| Temperature Range (Industrial) | TA | -40 | 85 | °C | 3 | ||
| Wiper Current of Each DCP | IW | -3 | 3 | mA | 3 | ||
| Power Rating of Each DCP | 5 | mW | 3 | ||||
| VCC Supply Voltage (absolute) | VCC | -0.3 | 6 | V | 3 | ||
| Storage Temperature | TSTG | -65 | 150 | °C | 3 | ||
| Wiper Current (10s) | IW | -6 | 6 | mA | 10s | 3 | |
| Lead Temperature (soldering, 10s) | 300 | °C | Soldering, 10s | 3 |
CAD (KiCad official)
- Symbol:
X95820UV14IZ-2.7 - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
x95820uv14iz-2-7-etched.step/x95820uv14iz-2-7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);x95820uv14iz-2-7.step/x95820uv14iz-2-7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (12 pp, sha256
f5958fe4b26f1b84, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# X95820UV14IZ-2.7
**RENESAS** · Digital Potentiometers · TSSOP-14
X95820UV14IZ-2.7 from RENESAS, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Power supply pin; the device operates from 2.7V to 5.5V. |
| 2 | WP | input | Active-low hardware write protection pin that prevents any Write operation of the I2C interface; it must be at logic HIGH to allow writes. |
| 3 | RH0 | passive | "High" terminal of DCP0; voltage at any DCP pin must stay between GND and VCC. |
| 4 | RL0 | passive | "Low" terminal of DCP0; voltage at any DCP pin must stay between GND and VCC. |
| 5 | RW0 | passive | "Wiper" terminal of DCP0; wiper current is limited to ±3.0mA and voltage must stay between GND and VCC. |
| 6 | A2 | input | Device address input for the I2C interface, which sets address bit A2 and must match the identification byte. |
| 7 | SCL | input | I2C interface clock input; the maximum SCL frequency is 400 kHz. |
| 8 | SDA | bidirectional | Serial data I/O for the I2C interface; its input buffer thresholds are 0.3*VCC (low) and 0.7*VCC (high), and it sinks 4mA with VOL up to 0.4V. |
| 9 | GND | power_in | Ground reference pin for the device. |
| 10 | RW1 | passive | "Wiper" terminal of DCP1; wiper current is limited to ±3.0mA and voltage must stay between GND and VCC. |
| 11 | RL1 | passive | "Low" terminal of DCP1; voltage at any DCP pin must stay between GND and VCC. |
| 12 | RH1 | passive | "High" terminal of DCP1; voltage at any DCP pin must stay between GND and VCC. |
| 13 | A0 | input | Device address input for the I2C interface, which sets address bit A0 and must match the identification byte. |
| 14 | A1 | input | Device address input for the I2C interface, which sets address bit A1 and must match the identification byte. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | TSSOP-14 |
| Category | Data Converters |
| Pins | 14 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| RH to RL Resistance (RTOTAL), U version | RTOTAL | | 50 | | kΩ | U version (50k) | 3 |
| RH to RL Resistance Tolerance | | -20 | | 20 | % | | 3 |
| Wiper Resistance | RW | | 70 | 200 | Ω | VCC = 3.3V @ 25°C; wiper current = VCC/RTOTAL | 3 |
| CH Potentiometer Capacitance | CH | | 10 | | pF | Note 15 | 3 |
| CL Potentiometer Capacitance | CL | | 10 | | pF | Note 15 | 3 |
| CW Potentiometer Capacitance | CW | | 25 | | pF | Note 15 | 3 |
| Leakage on DCP Pins | ILkgDCP | | 0.1 | 1 | µA | Voltage at pin from GND to VCC | 3 |
| Integral Non-linearity (voltage divider) | INL | -1 | | 1 | LSB | Voltage divider mode (Note 2) | 3 |
| Differential Non-linearity (voltage divider) | DNL | -0.5 | | 0.5 | LSB | Monotonic over all tap positions (Note 2) | 3 |
| Zero-scale Error, U option | ZSerror | 0 | 1 | 7 | LSB | U option (Note 2) | 3 |
| Full-scale Error, U option | FSerror | -7 | -1 | 0 | LSB | U option (Note 2) | 3 |
| DCP to DCP Matching (voltage divider) | VMATCH | -2 | | 2 | LSB | Any two DCPs at same tap position and same terminal voltages (Note 2) | 3 |
| Ratiometric Temperature Coefficient | TCV | -4 | | 4 | ppm/°C | DCP Register set to 80 hex | 3 |
| Integral Non-linearity (resistor mode) | RINL | -1 | | 1 | MI | DCP register between 20 hex and FF hex; monotonic | 3 |
| Differential Non-linearity (resistor mode) | RDNL | -0.5 | | 0.5 | MI | Resistor mode | 3 |
| Offset, U option | Roffset | 0 | 1 | 7 | MI | DCP register set to 00 hex, U option | 3 |
| DCP to DCP Matching (resistor mode) | RMATCH | -2 | | 2 | MI | Any two DCPs at same tap position with same terminal voltages | 3 |
| Resistance Temperature Coefficient | TCR | -45 | | 45 | ppm/°C | DCP register set between 20 hex and FF hex | 3 |
| VCC Supply Current (volatile write/read) | ICC1 | | | 1 | mA | fSCL = 400kHz; SDA = Open | 4 |
| VCC Supply Current (nonvolatile write) | ICC2 | | | 3 | mA | fSCL = 400kHz; SDA = Open | 4 |
| VCC Current (standby) | ISB | | | 5 | µA | VCC = +5.5V, I2C interface in standby | 4 |
| VCC Current (standby) | ISB | | | 2 | µA | VCC = +3.6V, I2C interface in standby | 4 |
| Leakage Current at A0, A1, A2, SDA, SCL, WP | ILkgDig | -10 | | 10 | µA | Voltage at pin from GND to VCC | 4 |
| DCP Wiper Response Time | tDCP | | | 1 | µs | SCL falling edge of last bit of DCP Data Byte to wiper change (Note 15) | 4 |
| Power-on Recall Voltage | Vpor | 1.8 | | 2.6 | V | Minimum VCC at which memory recall occurs | 4 |
| VCC Ramp Rate | VccRamp | 0.2 | | | V/ms | | 4 |
| Power-up Delay | tD | | | 3 | ms | VCC above Vpor, to DCP IVR recall completed and I2C in standby (Note 15) | 4 |
| EEPROM Endurance | | 150000 | | | Cycles | | 4 |
| EEPROM Retention | | 50 | | | Years | Temperature 75°C | 4 |
| Input Buffer LOW Voltage | VIL | -0.3 | | | V | WP, A2, A1, A0, SDA, SCL; maximum printed as 0.3*Vcc | 4 |
| SDA Output Buffer LOW Voltage | VOL | 0 | | 0.4 | V | Sinking 4mA | 4 |
| WP, A2, A1, A0, SDA, SCL Pin Capacitance | Cpin | | | 10 | pF | Note 15 | 4 |
| SCL Frequency | fSCL | | | 400 | kHz | | 4 |
| Pulse Width Suppression Time at SDA and SCL | tIN | | | 50 | ns | Any pulse narrower than the max spec is suppressed (Note 15) | 4 |
| SCL Falling Edge to SDA Output Data Valid | tAA | | | 900 | ns | SCL falling edge crossing 30% of VCC until SDA exits 30% to 70% window | 4 |
| Time the Bus Must be Free Before Start | tBUF | 1300 | | | ns | SDA crossing 70% of VCC during STOP to START | 4 |
| Clock LOW Time | tLOW | 1300 | | | ns | Measured at 30% of VCC crossing | 4 |
| Clock HIGH Time | tHIGH | 600 | | | ns | Measured at 70% of VCC crossing | 4 |
| START Condition Setup Time | tSU:STA | 600 | | | ns | SCL rising edge to SDA falling edge, both at 70% of VCC | 4 |
| START Condition Hold Time | tHD:STA | 600 | | | ns | SDA falling edge at 30% of VCC to SCL falling edge at 70% of VCC | 4 |
| Input Data Setup Time | tSU:DAT | 100 | | | ns | SDA exiting 30% to 70% window to SCL rising edge at 30% of VCC | 5 |
| Input Data Hold Time | tHD:DAT | 0 | | | ns | SCL rising edge at 70% of VCC to SDA entering 30% to 70% window | 5 |
| STOP Condition Setup Time | tSU:STO | 600 | | | ns | SCL rising edge at 70% of VCC to SDA rising edge at 30% of VCC | 5 |
| STOP Condition Hold Time | tHD:STO | 600 | | | ns | SDA rising edge to SCL falling edge, both at 70% of VCC | 5 |
| Output Data Hold Time | tDH | 0 | | | ns | SCL falling edge at 30% of VCC until SDA enters 30% to 70% window | 5 |
| SDA and SCL Rise Time | tR | | | 250 | ns | 30% to 70% of VCC; formula 20 + 0.1*Cb (Note 15) | 5 |
| SDA and SCL Fall Time | tF | | | 250 | ns | 70% to 30% of VCC; formula 20 + 0.1*Cb (Note 15) | 5 |
| Capacitive Loading of SDA or SCL | Cb | 10 | | 400 | pF | Total on-chip and off-chip (Note 15) | 5 |
| SDA and SCL Bus Pull-up Resistor, off-chip | Rpu | 1 | | | kΩ | Maximum determined by tR and tF (Note 15) | 5 |
| Non-volatile Write Cycle Time | tWP | | 12 | 20 | ms | Notes 15, 16 | 5 |
| A2, A1, A0, WP Setup Time | tSU:WPA | 600 | | | ns | Before START condition | 5 |
| A2, A1, A0, WP Hold Time | tHD:WPA | 600 | | | ns | After STOP condition | 5 |
| Recommended VCC Supply Voltage | VCC | 2.7 | | 5.5 | V | | 3 |
| Temperature Range (Industrial) | TA | -40 | | 85 | °C | | 3 |
| Wiper Current of Each DCP | IW | -3 | | 3 | mA | | 3 |
| Power Rating of Each DCP | | | | 5 | mW | | 3 |
| VCC Supply Voltage (absolute) | VCC | -0.3 | | 6 | V | | 3 |
| Storage Temperature | TSTG | -65 | | 150 | °C | | 3 |
| Wiper Current (10s) | IW | -6 | | 6 | mA | 10s | 3 |
| Lead Temperature (soldering, 10s) | | | | 300 | °C | Soldering, 10s | 3 |
## CAD (KiCad official)
- Symbol: `X95820UV14IZ-2.7`
- Footprint: `Package_SO:TSSOP-14_4.4x5mm_P0.65mm`
- 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files: `x95820uv14iz-2-7-etched.step` / `x95820uv14iz-2-7-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `x95820uv14iz-2-7.step` / `x95820uv14iz-2-7.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [RENESAS datasheet](docs/x95820uv14iz-2-7-datasheet.pdf) (12 pp, sha256 `f5958fe4b26f1b84`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/x95820uv14iz-2-7-datasheet.pdf)