main
Ray Publish 0.1.0 4de90d3
{
  "slug": "x9511wsizt1",
  "version": "0.1.0",
  "type": "component",
  "description": "Intersil(Renesas Electronics) Digital Potentiometers, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "data converters",
    "x9511wsizt1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "x9511wsizt1.kicad_sym",
    "x9511wsizt1.kicad_mod",
    "x9511wsizt1.glb",
    "x9511wsizt1.step",
    "x9511wsizt1.lbr",
    "docs/hero.png",
    "docs/x9511wsizt1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "x9511wsizt1-hero.glb",
    "x9511wsizt1-hero.overlay.json",
    "x9511wsizt1-etched.glb"
  ],
  "component": {
    "mpn": "X9511WSIZT1",
    "manufacturer": "Intersil(Renesas Electronics)",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Data Converters",
    "subcategory": "Digital Potentiometers",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/f9a9b3b14321d3541c723764b9683031.pdf",
    "parts": {
      "symbol": "x9511wsizt1.kicad_sym",
      "footprint": "x9511wsizt1.kicad_mod",
      "model_3d": "x9511wsizt1-hero.glb",
      "model_3d_plain": "x9511wsizt1-etched.glb",
      "model_3d_step": "x9511wsizt1-etched.step",
      "model_3d_step_plain": "x9511wsizt1.step",
      "lbr": "x9511wsizt1.lbr"
    },
    "distributor_links": {
      "lcsc": "C357828",
      "digikey": "X9511WSIZT1-ND",
      "mouser": "968-X9511WSIZT1"
    },
    "distributor_check": {
      "checked_at": "2026-10-31T03:13:37Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "X9511WSIZT1-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "968-X9511WSIZT1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VH/RH",
        "type": "passive",
        "description": "High terminal of the 31-resistor array, equivalent to the fixed high end of a mechanical potentiometer, with a voltage range of -5V to +5V."
      },
      {
        "number": "2",
        "name": "PU",
        "type": "input",
        "description": "Debounced push-up input for incrementing the wiper, with an on-chip pull-up holding it HIGH; a LOW (VIL max 0.8V) or switch closure to ground moves the wiper to the next higher tap after debounce."
      },
      {
        "number": "3",
        "name": "PD",
        "type": "input",
        "description": "Debounced push-down input for decrementing the wiper, with an on-chip pull-up holding it HIGH; a LOW (VIL max 0.8V) or switch closure to ground moves the wiper to the next lower tap after debounce."
      },
      {
        "number": "4",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "5",
        "name": "VW/RW",
        "type": "passive",
        "description": "Wiper terminal that outputs the voltage at the currently selected one of the 32 tap points."
      },
      {
        "number": "6",
        "name": "VL/RL",
        "type": "passive",
        "description": "Low terminal of the resistor array, equivalent to the fixed low end of a mechanical potentiometer, with a voltage range of -5V to +5V."
      },
      {
        "number": "7",
        "name": "ASE",
        "type": "input",
        "description": "AUTOSTORE enable input: VIL enables AUTOSTORE so the wiper position is stored on VCC power-down, while VIH disables it and a LOW-to-HIGH transition starts a manual store (ASE input HIGH level minimum 2V, LOW maximum 0.8V)."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage of 5V ±10% per the recommended operating conditions (ICC active current max 3 mA)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The PIN CONFIGURATION drawing text is garbled in the extracted datasheet. The pin-to-name mapping wa; The datasheet gives one DIP/SOIC pinout for all variants. The SO-8 package (MDP0027) drawing carries; The schema has no specs field, so the headline electrical values (ICC max 3 mA, ISB typ 100 µA, VCC "
        ],
        "pages_sent": 9,
        "cost_usd": 0.051,
        "at": "2026-10-31T03:13:21"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/f9a9b3b14321d3541c723764b9683031.pdf",
        "pages": 9,
        "sha256": "1c197dfbdde9eaa3",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "x9511wsizt1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "x9511wsizt1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "fd9b0c2d164bfffd526cd7d479e0f6c7ff4ee3cde9b54d3df35fd0a0e56ff82e",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}