main
Ray Publish 0.1.0 a61cae6
{
  "slug": "x9251uv24iz-2-7",
  "version": "0.1.0",
  "type": "component",
  "description": "RENESAS Digital Potentiometers, TSSOP-24. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "data converters",
    "x9251uv24iz-2.7",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "x9251uv24iz-2-7.kicad_sym",
    "x9251uv24iz-2-7.kicad_mod",
    "x9251uv24iz-2-7.glb",
    "x9251uv24iz-2-7.step",
    "x9251uv24iz-2-7.lbr",
    "docs/hero.png",
    "docs/x9251uv24iz-2-7-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "x9251uv24iz-2-7-hero.glb",
    "x9251uv24iz-2-7-hero.overlay.json",
    "x9251uv24iz-2-7-etched.glb"
  ],
  "component": {
    "mpn": "X9251UV24IZ-2.7",
    "manufacturer": "RENESAS",
    "package": "TSSOP-24",
    "pin_count": 24,
    "category": "Data Converters",
    "subcategory": "Digital Potentiometers",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/3f73a2c0c01a0e9b5640a2088abf1173.pdf",
    "parts": {
      "symbol": "x9251uv24iz-2-7.kicad_sym",
      "footprint": "x9251uv24iz-2-7.kicad_mod",
      "model_3d": "x9251uv24iz-2-7-hero.glb",
      "model_3d_plain": "x9251uv24iz-2-7-etched.glb",
      "model_3d_step": "x9251uv24iz-2-7-etched.step",
      "model_3d_step_plain": "x9251uv24iz-2-7.step",
      "lbr": "x9251uv24iz-2-7.lbr"
    },
    "distributor_links": {
      "lcsc": "C1539857",
      "digikey": "20-X9251UV24IZ-2.7-ND",
      "mouser": "968-X9251UV24IZ-2.7"
    },
    "distributor_check": {
      "checked_at": "2026-10-30T22:55:29Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "20-X9251UV24IZ-2.7-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "968-X9251UV24IZ-2.7",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SO",
        "type": "tri_state",
        "description": "Serial data output for the SPI bus; data is shifted out on the falling edge of SCK during a read, and SO is high impedance when CS is HIGH."
      },
      {
        "number": "2",
        "name": "A0",
        "type": "input",
        "description": "Device address input that sets the least significant bit of the SPI slave address and must be tied to a logic level (tWPASU and tWPAH are 0 ns)."
      },
      {
        "number": "3",
        "name": "RW3",
        "type": "passive",
        "description": "Wiper terminal of DCP3, equivalent to the wiper terminal of a mechanical potentiometer."
      },
      {
        "number": "4",
        "name": "RH3",
        "type": "passive",
        "description": "High terminal of DCP3, equivalent to a fixed terminal of a mechanical potentiometer, with voltage limited to VSS to VCC."
      },
      {
        "number": "5",
        "name": "RL3",
        "type": "passive",
        "description": "Low terminal of DCP3, equivalent to a fixed terminal of a mechanical potentiometer, with voltage limited to VSS to VCC."
      },
      {
        "number": "6",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect; must be left floating because the pin is used for Renesas manufacturing and testing."
      },
      {
        "number": "7",
        "name": "VCC",
        "type": "power_in",
        "description": "System supply voltage, 2.7 V to 5.5 V for the -2.7 variant, and VCC must always be at least as positive as VH, VL and VW."
      },
      {
        "number": "8",
        "name": "RL0",
        "type": "passive",
        "description": "Low terminal of DCP0, equivalent to a fixed terminal of a mechanical potentiometer, with voltage limited to VSS to VCC."
      },
      {
        "number": "9",
        "name": "RH0",
        "type": "passive",
        "description": "High terminal of DCP0, equivalent to a fixed terminal of a mechanical potentiometer, with voltage limited to VSS to VCC."
      },
      {
        "number": "10",
        "name": "RW0",
        "type": "passive",
        "description": "Wiper terminal of DCP0, equivalent to the wiper terminal of a mechanical potentiometer."
      },
      {
        "number": "11",
        "name": "CS",
        "type": "input",
        "description": "Active-low SPI chip select; when HIGH the device is deselected and in standby, and a HIGH-to-LOW transition is required after power-up before any operation."
      },
      {
        "number": "12",
        "name": "WP",
        "type": "input",
        "description": "Active-low hardware write protect; when LOW it prevents nonvolatile writes to the Data Registers."
      },
      {
        "number": "13",
        "name": "SI",
        "type": "input",
        "description": "Serial data input for the SPI bus; opcodes, byte addresses and data are latched on the rising edge of SCK."
      },
      {
        "number": "14",
        "name": "A1",
        "type": "input",
        "description": "Device address input that sets the second least significant bit of the SPI slave address and must be tied to a logic level (tWPASU and tWPAH are 0 ns)."
      },
      {
        "number": "15",
        "name": "RL1",
        "type": "passive",
        "description": "Low terminal of DCP1, equivalent to a fixed terminal of a mechanical potentiometer, with voltage limited to VSS to VCC."
      },
      {
        "number": "16",
        "name": "RH1",
        "type": "passive",
        "description": "High terminal of DCP1, equivalent to a fixed terminal of a mechanical potentiometer, with voltage limited to VSS to VCC."
      },
      {
        "number": "17",
        "name": "RW1",
        "type": "passive",
        "description": "Wiper terminal of DCP1, equivalent to the wiper terminal of a mechanical potentiometer."
      },
      {
        "number": "18",
        "name": "VSS",
        "type": "power_in",
        "description": "System ground for the device."
      },
      {
        "number": "19",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect; must be left floating because the pin is used for Renesas manufacturing and testing."
      },
      {
        "number": "20",
        "name": "RW2",
        "type": "passive",
        "description": "Wiper terminal of DCP2, equivalent to the wiper terminal of a mechanical potentiometer."
      },
      {
        "number": "21",
        "name": "RH2",
        "type": "passive",
        "description": "High terminal of DCP2, equivalent to a fixed terminal of a mechanical potentiometer, with voltage limited to VSS to VCC."
      },
      {
        "number": "22",
        "name": "RL2",
        "type": "passive",
        "description": "Low terminal of DCP2, equivalent to a fixed terminal of a mechanical potentiometer, with voltage limited to VSS to VCC."
      },
      {
        "number": "23",
        "name": "SCK",
        "type": "input",
        "description": "Serial clock input for the SPI bus that clocks data into and out of the device."
      },
      {
        "number": "24",
        "name": "HOLD",
        "type": "input",
        "description": "Pauses the SPI serial communication when driven LOW while SCK is LOW, and must be held HIGH when the pause feature is not used."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The Pin Configuration diagram text on page 3 is scrambled by text extraction. The pin-to-number mapp; KiCad electrical types were assigned by me, not stated by the datasheet. SO is marked tri_state beca; The datasheet gives 2.7 V to 5.5 V VCC for the -2.7 variant. The ordering table lists X9251UV24IZ-2."
        ],
        "pages_sent": 21,
        "cost_usd": 0.1033,
        "at": "2026-10-30T22:55:13"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/3f73a2c0c01a0e9b5640a2088abf1173.pdf",
        "pages": 21,
        "sha256": "5b6172127b453766",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 24,
        "described": 24,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "x9251uv24iz-2-7.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          7.8,
          0.97
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "706322f42d9793ebf28d5b80100a68bfa8769998a00b78acadf7af937fc1454f",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "x9251uv24iz-2-7-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          7.8,
          0.97
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2804f6f6834e5ca55a1f8a541c556b2588150715e18af8b23afa618b3b013b1c",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "M24.173",
      "source_page": 20,
      "D": {
        "nom_mm": 7.8,
        "range_mm": [
          null,
          null
        ]
      },
      "E1": {
        "nom_mm": 4.4,
        "range_mm": [
          null,
          null
        ]
      },
      "E": {
        "nom_mm": 6.4,
        "range_mm": [
          null,
          null
        ]
      },
      "e": {
        "nom_mm": 0.65,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.2,
        "range_mm": [
          null,
          1.2
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "x9251uv24iz-2-7.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}