main
Ray
Publish 0.1.0
355f1ae
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168
{
"slug": "x1g004611a028",
"version": "0.1.0",
"type": "component",
"description": "Seiko Epson Crystal Oscillators, SMD2520-4P. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"crystals, oscillators, resonators",
"x1g004611a028",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"x1g004611a028.kicad_sym",
"x1g004611a028.kicad_mod",
"x1g004611a028.glb",
"x1g004611a028.step",
"x1g004611a028.lbr",
"docs/hero.png",
"docs/x1g004611a028-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"x1g004611a028-hero.glb",
"x1g004611a028-hero.overlay.json",
"x1g004611a028-etched.glb"
],
"component": {
"mpn": "X1G004611A028",
"manufacturer": "Seiko Epson",
"package": "SMD2520-4P",
"pin_count": 4,
"category": "Crystals, Oscillators, Resonators",
"subcategory": "Crystal Oscillators",
"datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589836265626632192",
"parts": {
"symbol": "x1g004611a028.kicad_sym",
"footprint": "x1g004611a028.kicad_mod",
"model_3d": "x1g004611a028-hero.glb",
"model_3d_plain": "x1g004611a028-etched.glb",
"model_3d_step": "x1g004611a028-etched.step",
"model_3d_step_plain": "x1g004611a028.step",
"lbr": "x1g004611a028.lbr"
},
"distributor_links": {
"lcsc": "C5154205"
},
"distributor_check": {
"checked_at": "2026-10-13T19:23:23Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"pins": [
{
"number": "1",
"name": "ST",
"type": "input",
"description": "Standby/output-enable input: high or open enables the 25.0000 MHz output, while low stops oscillation and puts OUT in high impedance, with VIH min 0.8 VCC, VIL max 0.2 VCC, and an internal pull-up (minimum 3 MΩ at VCC = 1.8 V, +25 °C) so it should be tied to VCC when not controlled."
},
{
"number": "2",
"name": "GND",
"type": "power_in",
"description": "Ground reference for the supply, which must be kept at 0.0 V, and its VCC/GND pattern should be made as large as possible to keep high-frequency impedance low."
},
{
"number": "3",
"name": "OUT",
"type": "output",
"description": "CMOS clock output at the nominal 25.0000 MHz, specified for a 15 pF maximum load with rise and fall times of 7.0 ns maximum, going high impedance when ST is low, and the output line should be kept as short as possible."
},
{
"number": "4",
"name": "VCC",
"type": "power_in",
"description": "Supply input with an operating range of 1.6 V to 2.2 V (1.8 V typical) and an absolute maximum of -0.3 V to +5.0 V, requiring a 0.01 µF to 0.1 µF by-pass capacitor connected close to VCC and GND."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The MPN given (X1G004611A028, 13 characters) does not match the datasheet product number exactly. Th; The datasheet does not print the name 'SMD2520-4P'. It describes a CG package of 2.5 x 2.0 mm with f; The datasheet's terminal table shows '-' (no type) for GND and VCC. The types are set to power_in pe"
],
"pages_sent": 21,
"cost_usd": 0.0538,
"at": "2026-10-13T19:23:07"
},
"datasheet": {
"url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589836265626632192",
"pages": 21,
"sha256": "cfb103625b851708",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 4,
"described": 4,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "x1g004611a028.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.5,
2.0,
0.83
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "cd0c53e8a35a3cb36fc18e5248a2acf382b94b62d156b7bb9cc398eef3e21c4a",
"checked": "2026-10-13",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "x1g004611a028-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.5,
2.0,
0.83
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "685f4fc271bb9e68539042e2ffc82681c960cef91171e409e93c5542e1f190da",
"checked": "2026-10-13",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}