main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers x1g004611a028: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
x1g004611a028-etched.glb Publish 0.1.0 · Ray
x1g004611a028-etched.step x1g004611a028: factory component page (tier=lcsc) · Ray
x1g004611a028-hero.glb x1g004611a028: hero GLB from the etched model (keeps the MPN mark) · Ray
x1g004611a028-hero.overlay.json Publish 0.1.0 · Ray
x1g004611a028.glb Publish 0.1.0 · Ray
x1g004611a028.kicad_mod Publish 0.1.0 · Ray
x1g004611a028.kicad_sym Publish 0.1.0 · Ray
x1g004611a028.lbr Publish 0.1.0 · Ray
x1g004611a028.step Publish 0.1.0 · Ray

X1G004611A028

Seiko Epson · Crystal Oscillators · SMD2520-4P

X1G004611A028 from Seiko Epson, in a SMD2520-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ST input Standby/output-enable input: high or open enables the 25.0000 MHz output, while low stops oscillation and puts OUT in high impedance, with VIH min 0.8 VCC, VIL max 0.2 VCC, and an internal pull-up (minimum 3 MΩ at VCC = 1.8 V, +25 °C) so it should be tied to VCC when not controlled.
2 GND power_in Ground reference for the supply, which must be kept at 0.0 V, and its VCC/GND pattern should be made as large as possible to keep high-frequency impedance low.
3 OUT output CMOS clock output at the nominal 25.0000 MHz, specified for a 15 pF maximum load with rise and fall times of 7.0 ns maximum, going high impedance when ST is low, and the output line should be kept as short as possible.
4 VCC power_in Supply input with an operating range of 1.6 V to 2.2 V (1.8 V typical) and an absolute maximum of -0.3 V to +5.0 V, requiring a 0.01 µF to 0.1 µF by-pass capacitor connected close to VCC and GND.

Key specifications

Parameter Value
Manufacturer Seiko Epson
Package SMD2520-4P
Category Crystals, Oscillators, Resonators
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 1.6 1.8 2.2 V Operating range 3
Supply voltage GND GND 0 0 0 V Operating range 3
Operating temperature T use -40 25 105 °C Operating range 3
Output load condition L_CMOS 15 pF C-MOS output load 3
Supply voltage VCC-GND -0.3 5 V Absolute maximum ratings 3
Storage temperature T stg -40 125 °C Stored as bare product after unpacking 3
Input voltage VIN -0.3 V ST terminal; printed upper limit is VCC+0.3 (not a numeric value) 3
Frequency tolerance (OSC) f tol -50 50 ×10^-6 Y: T_use=-40 °C to +105 °C; includes initial tolerance, temperature, input voltage and load characteristics, excludes aging 3
Aging (first year) f aging -3 3 ×10^-6 T_use=+25 °C, VCC=2.5 V, first year 3
Start up time tOSC 3 ms t=0 at 90 %VCC 5
Current consumption ICC 2 mA No load 5
Standby current I_std 1.6 µA ST = GND 5
Output rise time tr 7 ns 20 %VCC → 80 %VCC 5
Output fall time tf 7 ns 80 %VCC → 20 %VCC 5
Symmetry SYM 40 60 % 50 %VCC level 5
High level output voltage VOH 0.9 ×VCC IOH = -1 mA; printed as 0.9 VCC 5
Low level output voltage VOL 0.1 ×VCC IOL = 1 mA; printed as 0.1 VCC 5
High level input voltage VIH 0.8 ×VCC ST terminal; printed as 0.8 VCC 5
Low level input voltage VIL 0.2 ×VCC ST terminal; printed as 0.2 VCC 5
High level input current IIH 1 µA VIN = VCC 5
Low level input current IIL -1 µA VIN = GND 5
Output disable time tstp 100 Ns ST terminal High → Low 5
Output enable time tsta 3 Ms ST terminal Low → High 5
Input pull-up resistance RUP 3 MΩ VCC=1.8 V, at +25 ℃ 5
Nominal output frequency f0 25 MHz Output frequency f0 = 25.0000 MHz as printed 3

CAD (KiCad official)

  • Symbol: X1G004611A028
  • Footprint: Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm
  • 3D model: SMD2520-4P (KiCad packages3D, STEP)
  • 3D model files: x1g004611a028-etched.step / x1g004611a028-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); x1g004611a028.step / x1g004611a028.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Seiko Epson datasheet (21 pp, sha256 cfb103625b851708, retrieved 2026-10-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF