Generated by kicad-footprint-generator · KiCad file format 20260206
WR0332-18A50R
Wayon · Linear Voltage Regulators (LDO) · SOT-23-5
WR0332-18A50R from Wayon, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input voltage supply, to be bypassed with a typical 1μF capacitor to GND and placed as close to the IN and GND pins as possible. |
| 2 | GND | power_in | Common ground. |
| 3 | EN | input | Active-high enable input with a small pull-up current source, nominally 0.1μA. |
| 4 | NC | unconnected | Not connected (listed as NC in the datasheet pin description). |
| 5 | OUT | power_out | Regulated output voltage that requires a low-ESR capacitor, typically 1μF, from OUT to ground for stability, placed as close to the OUT and GND pins as possible; an internal 150Ω (typical) pull-down resistor discharges VOUT when the regulator shuts down. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Wayon |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage range (VOUT>1.5V) | VOUT | 0.98 | 1.02 | VOUT | VOUT>1.5V, IOUT=1mA | 5 | |
| Dropout voltage (VOUT=1.8V) | VDO | 400 | 600 | mV | VOUT=1.8V, IOUT=300mA | 5 | |
| Shut-down current | ISHDN | 0.1 | 1 | μA | VEN = 0V | 5 | |
| EN high voltage (enabled) | VENH | 1.2 | V | VIN=5.5V, IOUT=1mA | 6 | ||
| EN low voltage (disabled) | VENL | 0.4 | V | VIN=5.5V, IOUT=1mA | 6 | ||
| Input voltage range | VIN | 2.2 | 5.5 | V | 4 | ||
| EN input voltage range | VEN | 0 | 5.5 | V | 4 | ||
| Nominal output voltage range | VOUT(NOM) | 1 | 3.3 | V | 4 | ||
| Output current | IOUT | 0 | 300 | mA | 4 | ||
| Input capacitor | CIN | 1 | μF | 4 | |||
| Output capacitor | COUT | 1 | μF | 4 | |||
| Operating temperature range | TA | -40 | 125 | °C | 4 | ||
| Input voltage range | VIN | -0.3 | 6 | V | 3 | ||
| EN input voltage range | VEN | -0.3 | 6 | V | 3 | ||
| Output voltage range | VOUT | -0.3 | 6 | V | 3 | ||
| Maximum output current | 500 | mA | Footnote 2: measured on 2cm x 2cm 2-layer FR4 PCB | 3 | |||
| Power dissipation PD(MAX), SOT23-5 | PD(MAX) | 1046 | mW | TA = 25ºC | 3 | ||
| Junction temperature | TJ | 150 | °C | 3 | |||
| Lead temperature range | 260 | °C | 3 | ||||
| Storage temperature range | -55 | 150 | °C | 3 | |||
| ESD susceptibility HBM | -8000 | 8000 | V | HBM | 3 | ||
| Output current limit | ILIM | 500 | mA | VEN=VIN | 5 | ||
| Maximum output current in the accuracy range | IOUT | 300 | mA | VEN=VIN | 5 | ||
| Short current | ISHORT | 150 | mA | VEN=VIN, VOUT short to GND | 5 | ||
| Thermal shutdown threshold | TSD | 165 | ºC | 6 | |||
| Thermal shutdown hysteresis | ΔTSD | 30 | ºC | 6 | |||
| Output discharge resistance | RDIS | 150 | Ω | VIN=4.0V, VEN=0V | 6 | ||
| Thermal resistance RθJA, SOT23-5 | RθJA | 119.4 | °C/W | 2cm x 2cm 2-layer FR4 PCB, 1 oz copper (footnote 2/4) | 3 | ||
| Thermal resistance RθJB, SOT23-5 | RθJB | 89.1 | °C/W | JEDEC board, JESD51-7 (footnote 3) | 3 | ||
| Thermal resistance top RθJC, SOT23-5 | RθJC | 48.9 | °C/W | Top, JEDEC board (footnote 3) | 3 | ||
| Thermal resistance bottom RθJC, SOT23-5 | RθJC | 26.36 | °C/W | Bottom, JEDEC board (footnote 3) | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | close as possible to their respective LDO pins. Connect the CIN and COUT grounds, with all LDO ground pins as close together as possible, through a wide copper surface. Using through-holes and long wi | 22 |
CAD (KiCad official)
- Symbol:
WR0332-18A50R - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
wr0332-18a50r-etched.step/wr0332-18a50r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);wr0332-18a50r.step/wr0332-18a50r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Wayon datasheet (30 pp, sha256
115200abc938e7fe, retrieved 2026-11-04, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).