Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

WR0332-18A50R

Wayon · Linear Voltage Regulators (LDO) · SOT-23-5

WR0332-18A50R from Wayon, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Input voltage supply, to be bypassed with a typical 1μF capacitor to GND and placed as close to the IN and GND pins as possible.
2 GND power_in Common ground.
3 EN input Active-high enable input with a small pull-up current source, nominally 0.1μA.
4 NC unconnected Not connected (listed as NC in the datasheet pin description).
5 OUT power_out Regulated output voltage that requires a low-ESR capacitor, typically 1μF, from OUT to ground for stability, placed as close to the OUT and GND pins as possible; an internal 150Ω (typical) pull-down resistor discharges VOUT when the regulator shuts down.

Key specifications

Parameter Value
Manufacturer Wayon
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage range (VOUT>1.5V) VOUT 0.98 1.02 VOUT VOUT>1.5V, IOUT=1mA 5
Dropout voltage (VOUT=1.8V) VDO 400 600 mV VOUT=1.8V, IOUT=300mA 5
Shut-down current ISHDN 0.1 1 μA VEN = 0V 5
EN high voltage (enabled) VENH 1.2 V VIN=5.5V, IOUT=1mA 6
EN low voltage (disabled) VENL 0.4 V VIN=5.5V, IOUT=1mA 6
Input voltage range VIN 2.2 5.5 V 4
EN input voltage range VEN 0 5.5 V 4
Nominal output voltage range VOUT(NOM) 1 3.3 V 4
Output current IOUT 0 300 mA 4
Input capacitor CIN 1 μF 4
Output capacitor COUT 1 μF 4
Operating temperature range TA -40 125 °C 4
Input voltage range VIN -0.3 6 V 3
EN input voltage range VEN -0.3 6 V 3
Output voltage range VOUT -0.3 6 V 3
Maximum output current 500 mA Footnote 2: measured on 2cm x 2cm 2-layer FR4 PCB 3
Power dissipation PD(MAX), SOT23-5 PD(MAX) 1046 mW TA = 25ºC 3
Junction temperature TJ 150 °C 3
Lead temperature range 260 °C 3
Storage temperature range -55 150 °C 3
ESD susceptibility HBM -8000 8000 V HBM 3
Output current limit ILIM 500 mA VEN=VIN 5
Maximum output current in the accuracy range IOUT 300 mA VEN=VIN 5
Short current ISHORT 150 mA VEN=VIN, VOUT short to GND 5
Thermal shutdown threshold TSD 165 ºC 6
Thermal shutdown hysteresis ΔTSD 30 ºC 6
Output discharge resistance RDIS 150 Ω VIN=4.0V, VEN=0V 6
Thermal resistance RθJA, SOT23-5 RθJA 119.4 °C/W 2cm x 2cm 2-layer FR4 PCB, 1 oz copper (footnote 2/4) 3
Thermal resistance RθJB, SOT23-5 RθJB 89.1 °C/W JEDEC board, JESD51-7 (footnote 3) 3
Thermal resistance top RθJC, SOT23-5 RθJC 48.9 °C/W Top, JEDEC board (footnote 3) 3
Thermal resistance bottom RθJC, SOT23-5 RθJC 26.36 °C/W Bottom, JEDEC board (footnote 3) 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper close as possible to their respective LDO pins. Connect the CIN and COUT grounds, with all LDO ground pins as close together as possible, through a wide copper surface. Using through-holes and long wi 22

CAD (KiCad official)

  • Symbol: WR0332-18A50R
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: wr0332-18a50r-etched.step / wr0332-18a50r-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); wr0332-18a50r.step / wr0332-18a50r.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Wayon datasheet (30 pp, sha256 115200abc938e7fe, retrieved 2026-11-04, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF