main
Ray Publish 0.1.0 62ed349

W25Q80EWUXIE TR

Winbond Elec · NOR FLASH · USON-8-EP(2x3)

W25Q80EWUXIE TR from Winbond Elec, in a USON-8-EP(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 /CS input Chip Select input that enables the device when low and deselects it (outputs high-impedance, standby power) when high.
2 DO (IO1) bidirectional Data output in standard SPI and data input/output 1 in Dual and Quad SPI.
3 /WP (IO2) bidirectional Active-low Write Protect input that prevents Status Register writes, and becomes IO2 in Quad SPI when QE=1.
4 GND power_in Ground.
5 DI (IO0) bidirectional Data input in standard SPI and data input/output 0 in Dual and Quad SPI.
6 CLK input Serial Clock input that provides timing for serial input and output operations.
7 /HOLD (IO3) bidirectional Active-low Hold input that pauses the device while selected, and becomes IO3 in Quad SPI when QE=1.
8 VCC power_in Power supply, 1.65V to 1.95V.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Winbond Elec
Package USON-8-EP(2x3)
Category Memory
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (absolute max) VCC -0.6 2.5 V 65
Voltage Applied to Any Pin VIO -0.6 V Relative to Ground; upper limit VCC+0.4 65
Transient Voltage on any Pin VIOT -2 V <20nS Transient, Relative to Ground; upper limit VCC+2.0V 65
Storage Temperature TSTG -65 150 °C 65
Electrostatic Discharge Voltage VESD -2000 2000 V Human Body Model 65
Supply Voltage VCC 1.65 1.95 V FR = 104MHz, fR = 50MHz 65
Ambient Temperature, Operating TA -40 85 °C Industrial 65
VCC (min) to /CS Low tVSL 10 µs 66
Time Delay Before Write Instruction tPUW 1 10 ms 66
Write Inhibit Threshold Voltage VWI 1 1.4 V 66
Input Capacitance CIN 6 pF VIN = 0V 67
Output Capacitance Cout 8 pF VOUT = 0V 67
Input Leakage ILI -2 2 µA 67
I/O Leakage ILO -2 2 µA 67
Standby Current ICC1 10 25 µA /CS = VCC, VIN = GND or VCC 67
Power-down Current ICC2 0.5 7.5 µA /CS = VCC, VIN = GND or VCC 67
Current Read Data / Dual / Quad 1MHz ICC3 1 3 mA C = 0.1 VCC / 0.9 VCC, DO = Open 67
Current Read Data / Dual / Quad 50MHz ICC3 4 6 mA C = 0.1 VCC / 0.9 VCC, DO = Open 67
Current Read Data / Dual Output / Quad Output Read 104MHz ICC3 6 8 mA C = 0.1 VCC / 0.9 VCC, DO = Open 67
Current Write Status Register ICC4 15 20 mA /CS = VCC 67
Current Page Program ICC5 15 20 mA /CS = VCC 67
Current Sector/Block Erase ICC6 15 20 mA /CS = VCC 67
Current Chip Erase ICC7 15 20 mA /CS = VCC 67
Input Low Voltage Vil -0.5 V max is VCC x 0.3 67
Output Low Voltage Vol 0.2 V Iol = 100 µA 67
Clock frequency for all instructions except Read Data (03h) FR 104 MHz 69
Clock frequency for Read Data instruction (03h) fR 50 MHz 69
Clock High, Low Time for all instructions except Read Data (03h) tCLH1, tCLL1 4 ns 69
Clock High, Low Time for Read Data (03h) tCRLH, tCRLL 8 ns 69
/CS Active Setup Time relative to CLK tSLCH 5 ns 69
/CS Not Active Hold Time relative to CLK tCHSL 5 ns 69
Data In Setup Time tDVCH 2 ns 69
Data In Hold Time tCHDX 5 ns 69
/CS Active Hold Time relative to CLK tCHSH 5 ns 69
/CS Not Active Setup Time relative to CLK tSHCH 5 ns 69
/CS Deselect Time (Array Read to Array Read) tSHSL1 10 ns 69
/CS Deselect Time (Erase/Program to Read SR) / Volatile Status Register Write Time tSHSL2 50 ns 69
Output Disable Time tSHQZ 7 ns 69
Clock Low to Output Valid tCLQV1 6 ns 69
Output Hold Time tCLQX 0 ns 70
/HOLD Active Setup Time relative to CLK tHLCH 5 ns 70
/HOLD Active Hold Time relative to CLK tCHHH 5 ns 70
/HOLD Not Active Setup Time relative to CLK tHHCH 5 ns 70
/HOLD Not Active Hold Time relative to CLK tCHHL 5 ns 70
/HOLD to Output Low-Z tHHQX 7 ns 70
/HOLD to Output High-Z tHLQZ 12 ns 70
Write Protect Setup Time Before /CS Low tWHSL 20 ns 70
Write Protect Hold Time After /CS High tSHWL 100 ns 70
/CS High to Power-down Mode tDP 3 µs 70
/CS High to Standby Mode without ID Read tRES1 3 µs 70
/CS High to Standby Mode with ID Read tRES2 1.8 µs 70
/CS High to next Instruction after Suspend tSUS 20 µs 70
Write Status Register Time tW 1 15 ms 70
Byte Program Time (First Byte) tBP1 15 30 µs 70
Additional Byte Program Time (After First Byte) tBP2 2.5 5 µs 70
Page Program Time tPP 0.4 0.8 ms 70
Sector Erase Time (4KB) tSE 45 400 ms 70
Block Erase Time (32KB) tBE1 150 800 ms 70
Block Erase Time (64KB) tBE2 180 1000 ms 70
Chip Erase Time tce 3 10 s 70

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin 9.1 8-Pin SOIC 208-mil (Package Code SS)............................................................................ 72 9.2 8-Pin SOIC 150-mil (Package Code SN)........................................ 4

CAD (KiCad official)

  • Symbol: W25Q80EWUXIE TR
  • Footprint: Package_SON:SON-8-1EP_3x2mm_P0.5mm_EP1.4x1.6mm
  • 3D model: USON-8-EP(2x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: w25q80ewuxie-tr-etched.step / w25q80ewuxie-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); w25q80ewuxie-tr.step / w25q80ewuxie-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Winbond Elec datasheet (80 pp, sha256 4d31ad6252253663, retrieved 2026-10-30, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF