Generated by kicad-footprint-generator · KiCad file format 20260206
W25Q80EWUXIE TR
Winbond Elec · NOR FLASH · USON-8-EP(2x3)
W25Q80EWUXIE TR from Winbond Elec, in a USON-8-EP(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | /CS | input | Chip Select input that enables the device when low and deselects it (outputs high-impedance, standby power) when high. |
| 2 | DO (IO1) | bidirectional | Data output in standard SPI and data input/output 1 in Dual and Quad SPI. |
| 3 | /WP (IO2) | bidirectional | Active-low Write Protect input that prevents Status Register writes, and becomes IO2 in Quad SPI when QE=1. |
| 4 | GND | power_in | Ground. |
| 5 | DI (IO0) | bidirectional | Data input in standard SPI and data input/output 0 in Dual and Quad SPI. |
| 6 | CLK | input | Serial Clock input that provides timing for serial input and output operations. |
| 7 | /HOLD (IO3) | bidirectional | Active-low Hold input that pauses the device while selected, and becomes IO3 in Quad SPI when QE=1. |
| 8 | VCC | power_in | Power supply, 1.65V to 1.95V. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Winbond Elec |
| Package | USON-8-EP(2x3) |
| Category | Memory |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (absolute max) | VCC | -0.6 | 2.5 | V | 65 | ||
| Voltage Applied to Any Pin | VIO | -0.6 | V | Relative to Ground; upper limit VCC+0.4 | 65 | ||
| Transient Voltage on any Pin | VIOT | -2 | V | <20nS Transient, Relative to Ground; upper limit VCC+2.0V | 65 | ||
| Storage Temperature | TSTG | -65 | 150 | °C | 65 | ||
| Electrostatic Discharge Voltage | VESD | -2000 | 2000 | V | Human Body Model | 65 | |
| Supply Voltage | VCC | 1.65 | 1.95 | V | FR = 104MHz, fR = 50MHz | 65 | |
| Ambient Temperature, Operating | TA | -40 | 85 | °C | Industrial | 65 | |
| VCC (min) to /CS Low | tVSL | 10 | µs | 66 | |||
| Time Delay Before Write Instruction | tPUW | 1 | 10 | ms | 66 | ||
| Write Inhibit Threshold Voltage | VWI | 1 | 1.4 | V | 66 | ||
| Input Capacitance | CIN | 6 | pF | VIN = 0V | 67 | ||
| Output Capacitance | Cout | 8 | pF | VOUT = 0V | 67 | ||
| Input Leakage | ILI | -2 | 2 | µA | 67 | ||
| I/O Leakage | ILO | -2 | 2 | µA | 67 | ||
| Standby Current | ICC1 | 10 | 25 | µA | /CS = VCC, VIN = GND or VCC | 67 | |
| Power-down Current | ICC2 | 0.5 | 7.5 | µA | /CS = VCC, VIN = GND or VCC | 67 | |
| Current Read Data / Dual / Quad 1MHz | ICC3 | 1 | 3 | mA | C = 0.1 VCC / 0.9 VCC, DO = Open | 67 | |
| Current Read Data / Dual / Quad 50MHz | ICC3 | 4 | 6 | mA | C = 0.1 VCC / 0.9 VCC, DO = Open | 67 | |
| Current Read Data / Dual Output / Quad Output Read 104MHz | ICC3 | 6 | 8 | mA | C = 0.1 VCC / 0.9 VCC, DO = Open | 67 | |
| Current Write Status Register | ICC4 | 15 | 20 | mA | /CS = VCC | 67 | |
| Current Page Program | ICC5 | 15 | 20 | mA | /CS = VCC | 67 | |
| Current Sector/Block Erase | ICC6 | 15 | 20 | mA | /CS = VCC | 67 | |
| Current Chip Erase | ICC7 | 15 | 20 | mA | /CS = VCC | 67 | |
| Input Low Voltage | Vil | -0.5 | V | max is VCC x 0.3 | 67 | ||
| Output Low Voltage | Vol | 0.2 | V | Iol = 100 µA | 67 | ||
| Clock frequency for all instructions except Read Data (03h) | FR | 104 | MHz | 69 | |||
| Clock frequency for Read Data instruction (03h) | fR | 50 | MHz | 69 | |||
| Clock High, Low Time for all instructions except Read Data (03h) | tCLH1, tCLL1 | 4 | ns | 69 | |||
| Clock High, Low Time for Read Data (03h) | tCRLH, tCRLL | 8 | ns | 69 | |||
| /CS Active Setup Time relative to CLK | tSLCH | 5 | ns | 69 | |||
| /CS Not Active Hold Time relative to CLK | tCHSL | 5 | ns | 69 | |||
| Data In Setup Time | tDVCH | 2 | ns | 69 | |||
| Data In Hold Time | tCHDX | 5 | ns | 69 | |||
| /CS Active Hold Time relative to CLK | tCHSH | 5 | ns | 69 | |||
| /CS Not Active Setup Time relative to CLK | tSHCH | 5 | ns | 69 | |||
| /CS Deselect Time (Array Read to Array Read) | tSHSL1 | 10 | ns | 69 | |||
| /CS Deselect Time (Erase/Program to Read SR) / Volatile Status Register Write Time | tSHSL2 | 50 | ns | 69 | |||
| Output Disable Time | tSHQZ | 7 | ns | 69 | |||
| Clock Low to Output Valid | tCLQV1 | 6 | ns | 69 | |||
| Output Hold Time | tCLQX | 0 | ns | 70 | |||
| /HOLD Active Setup Time relative to CLK | tHLCH | 5 | ns | 70 | |||
| /HOLD Active Hold Time relative to CLK | tCHHH | 5 | ns | 70 | |||
| /HOLD Not Active Setup Time relative to CLK | tHHCH | 5 | ns | 70 | |||
| /HOLD Not Active Hold Time relative to CLK | tCHHL | 5 | ns | 70 | |||
| /HOLD to Output Low-Z | tHHQX | 7 | ns | 70 | |||
| /HOLD to Output High-Z | tHLQZ | 12 | ns | 70 | |||
| Write Protect Setup Time Before /CS Low | tWHSL | 20 | ns | 70 | |||
| Write Protect Hold Time After /CS High | tSHWL | 100 | ns | 70 | |||
| /CS High to Power-down Mode | tDP | 3 | µs | 70 | |||
| /CS High to Standby Mode without ID Read | tRES1 | 3 | µs | 70 | |||
| /CS High to Standby Mode with ID Read | tRES2 | 1.8 | µs | 70 | |||
| /CS High to next Instruction after Suspend | tSUS | 20 | µs | 70 | |||
| Write Status Register Time | tW | 1 | 15 | ms | 70 | ||
| Byte Program Time (First Byte) | tBP1 | 15 | 30 | µs | 70 | ||
| Additional Byte Program Time (After First Byte) | tBP2 | 2.5 | 5 | µs | 70 | ||
| Page Program Time | tPP | 0.4 | 0.8 | ms | 70 | ||
| Sector Erase Time (4KB) | tSE | 45 | 400 | ms | 70 | ||
| Block Erase Time (32KB) | tBE1 | 150 | 800 | ms | 70 | ||
| Block Erase Time (64KB) | tBE2 | 180 | 1000 | ms | 70 | ||
| Chip Erase Time | tce | 3 | 10 | s | 70 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 9.1 8-Pin SOIC 208-mil (Package Code SS)............................................................................ 72 9.2 8-Pin SOIC 150-mil (Package Code SN)........................................ | 4 |
CAD (KiCad official)
- Symbol:
W25Q80EWUXIE TR - Footprint:
Package_SON:SON-8-1EP_3x2mm_P0.5mm_EP1.4x1.6mm - 3D model: USON-8-EP(2x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
w25q80ewuxie-tr-etched.step/w25q80ewuxie-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);w25q80ewuxie-tr.step/w25q80ewuxie-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Winbond Elec datasheet (80 pp, sha256
4d31ad6252253663, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).